Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Federal Brace Rivera bench support bracket is designed as a sturdy solution for bench installations in indoor or outdoor spaces, giving benches a fixed structural support point along the wall and seat. The bracket uses a 16 inch height and 16 inch length to create a right-angle support that carries seating loads from the bench top back to the mounting surface. A 0.25 inch material thickness in steel provides a solid structural section for benches where point loads and regular use are expected. Each bracket is rated for a 500 pound carry capacity, so a single support can handle significant seating load when installed appropriately in its application. Federal Brace identifies this model as FB-09547, which helps align the exact size and geometry when matching to existing benches or drawings. The steel finish allows Rivera bench brackets to work in both functional and architectural seating layouts.
The Rivera bench support bracket uses multiple mounting holes to fasten both to the vertical structure and to the bench surface, giving the installer several points to draw the steel tight to framing and seat material. Federal Brace notes sixteen holes at 0.26 inch diameter, so standard structural fasteners that fit this hole size can be used when matching to framing or substructure. When multiple brackets are needed for long span benches, the Rivera brackets are recommended to be spaced no more than 30 inches apart, which establishes a planning grid for laying out supports under continuous seating. The 16 inch height allows installers to position the top of the bracket to align with typical bench seat thickness while still maintaining a comfortable sitting height. Because the bracket is identified for indoor or outdoor use, installers can apply the same layout logic across different bench locations.
This Rivera bench support bracket is described specifically for sturdy bench installations indoors or out, so one model can serve in entryways, mudrooms, patios, or similar seating runs. The 16 inch length defines how far the bench surface projects from the wall, helping designers coordinate circulation and clearances in hallways or gathering areas. With a 16 inch height, the bracket supports seat surfaces at a comfortable level once bench top thickness is factored into the assembly. The 0.25 inch steel material gives each support a compact yet strong profile, so benches can remain visually light while still carrying regular occupant loads. A steel finish, with an option to order raw steel that can be painted, lets the bracket be color matched to surrounding millwork or finishes for a unified installation.
Each Rivera bench support bracket carries up to 500 pounds, so designers can calculate total bench capacity by multiplying the number of supports placed along the span. Sixteen 0.26 inch holes across the bracket give several fastening locations into framing and bench structure, which spreads load and helps the support work as a rigid connection. The guidance to space brackets no more than 30 inches apart on long benches sets a clear layout interval that supports users along the full length of the seat. Federal Brace marks this bracket as part number FB-09547, which lets installers and specifiers reference the exact model when repeating a successful layout on additional projects. The bench bracket is also described as proudly crafted in the USA, which matters on projects where domestic sourcing is part of the specification or documentation requirements.
The Rivera bench support bracket is listed as 16 inches high by 16 inches long, which sets both the bench projection from the wall and the vertical support height.
Each Federal Brace Rivera bench support bracket has a carry capacity of 500 pounds, so every bracket contributes substantial load capacity along a bench span.
The Rivera bench support bracket is described for sturdy bench installations indoors or out, so the same model can be specified for both interior and exterior seating.
For long span benches, Federal Brace recommends spacing Rivera bench support brackets no more than 30 inches apart to maintain support along the seat.
The Rivera bench support bracket has sixteen holes at 0.26 inch diameter, providing multiple fastening points into framing and the bench structure.
When ordered in raw steel, the Rivera bench support bracket can be painted so the visible steel can align with the project color scheme.
The Federal Brace Rivera bench support bracket steel 16 inch by 16 inch, FB-09547, pairs a 500 pound carry capacity with a compact 0.25 inch steel profile for structural bench runs. Sixteen 0.26 inch holes give flexible fastening locations into framing and the bench top, supporting solid connections along the support line. Recommended spacing of no more than 30 inches between brackets on long benches provides a straightforward layout rule during planning. For projects needing a bench support bracket usable indoors or out, with the option to paint raw steel to match finishes, this Rivera model offers a defined size and rating to build around.
