Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rivera Bench Support Bracket defines this Federal Brace solution as a dedicated bench support that ties directly into your seating structure. It provides a stable steel arm at 16 inches high by 16 inches long, so the bracket reaches out under the bench while carrying load back to the mounting surface. Its role in a bench build is to transfer seating weight into the wall or frame, helping the finished bench feel solid under use.
The black finish allows the bracket to visually blend with many bench designs, which matters when the bracket is visible under open seating. A material thickness of 0.25 inch provides a substantial section of steel, helping the bracket resist flexing when the bench is loaded. A rated carry capacity of 500 pounds for each bracket supports demanding seating applications where occupants or gear add up quickly.
The bracket belongs to the bench brackets class within builders hardware, so it is designed specifically around supporting seating rather than general shelving. Federal Brace manufactures the Rivera Bench Support Bracket in the USA, so its production origin is clearly identified for projects that specify domestically made components.
The Rivera Bench Support Bracket is designed for straightforward mounting because its right-angle 16 inch by 16 inch geometry clearly indicates the vertical and horizontal legs. This shape lets the vertical leg tie into a wall stud, fascia, or bench support frame, while the horizontal leg reaches under the seat to carry the span. With sixteen 0.26 inch holes, the bracket offers a flexible pattern for fastener placement into solid backing, giving room to align holes with available structure.
For long-span benches, the recommended practice is to space Rivera Bench Support Brackets no more than 30 inches apart. This spacing guidance connects directly to the 500 pound carry capacity per bracket, helping distribute weight along the run instead of concentrating load on a single point. By following the 30 inch spacing recommendation, the bench support layout works with the bracket design, supporting indoor or outdoor seating that experiences varied loading from different users along the span.
The Federal Brace Rivera Bench Bracket black 16 inch high by 16 inch long format works effectively in bench seating layouts that need both depth coverage and vertical engagement with structure. The 16 inch horizontal reach helps support wider bench seats by extending under a good portion of the seat, which matters when the bench depth approaches typical seating dimensions. The 16 inch vertical leg then connects that reach back to framing or a support wall, helping carry both vertical and some cantilevered loads.
The 500 pound carry capacity for each bracket directly supports heavy-use seating situations, where individual users, multiple people, or gear rest on a bench. In these conditions, installers can apply the 30 inch spacing recommendation along a wall to align brackets under key seating zones, spreading loads across multiple units. Because the material thickness is 0.25 inch, the bracket contributes stiffness to the overall assembly, which helps the bench feel consistent and solid along its entire length.
The black finish supports use in both indoor and outdoor environments described for this bracket, so the same part number FB-09816 can appear across different project types. The finish helps the bracket coordinate with darker framing or contrast against lighter seating surfaces, which is useful when the bracket remains partially visible. By fitting into the builders hardware and bench support brackets category, the Rivera design matches typical expectations for bench depth and structure, so it integrates cleanly into woodworking-based seating systems supplied by distributors such as Wurth Baer Supply.
The Rivera Bench Support Bracket uses sixteen 0.26 inch holes to create multiple fastening options along both the vertical and horizontal legs, which supports careful alignment into studs, blocking, or structural frames. This dense hole pattern helps installers select positions that correspond to available backing, improving how loads move from the seat into solid material. The consistent 0.26 inch hole size standardizes the interface with the recommended fastener kit 39972, aligning hole geometry with known fastener dimensions.
The 0.25 inch material thickness contributes to a predictable deflection profile when the bracket is loaded, which matters when multiple brackets support a continuous bench. With each bracket using the same quarter-inch steel section, the bench experiences similar stiffness at every support, helping avoid noticeable soft spots between locations. When brackets are spaced no more than 30 inches apart along a long span, this uniform stiffness works with the 500 pound rating to create a repeatable support pattern across the full run.
The Federal Brace branding and specific manufacturer part number FB-09816 give a precise identity to this black bench support bracket, simplifying specification and repeat ordering in professional settings. When a project calls for additional seating or mirrored layouts, referencing FB-09816 connects directly to the 16 inch by 2 inch by 16 inch size, 0.25 inch thickness, and black finish in one code. Because the product is crafted in the USA, sourcing notes in project documentation can accurately reflect domestic manufacture where that is a stated requirement.
The Rivera Bench Support Bracket measures 16 inches by 2 inches by 16 inches, so it provides a deep horizontal support leg with a tall vertical leg while keeping a narrow 2 inch mounting width against the structure.
The FB-09816 Rivera Bench Support Bracket has a carry capacity of 500 pounds each, so load planning for a bench can be based on that rating when deciding how many brackets to use along a span.
The Rivera Bench Support Bracket is recommended to be spaced no more than 30 inches apart on long span benches, so weight from seating is distributed across multiple supports instead of concentrating at a few points.
The Rivera Bench Support Bracket uses a material thickness of 0.25 inch, so the quarter-inch steel section helps reduce flexing under load and contributes to a solid feel in the finished bench.
The Rivera Bench Support Bracket provides sixteen 0.26 inch holes, so there are multiple fastening points available to align with structural backing while coordinating with the recommended fastener kit 39972.
The Federal Brace Rivera Bench Support Bracket is crafted in the USA, so project documentation can accurately record domestic manufacture when specifying bench support hardware.
The Federal Brace Rivera Bench Support Bracket black 16 inch by 16 inch layout, 0.25 inch thickness, and 500 pound carry capacity per bracket align with demanding seating projects. Its sixteen 0.26 inch mounting holes and 30 inch recommended spacing support thoughtful bracket placement along long benches. With confirmed indoor or outdoor bench application, a defined FB-09816 part number, and USA manufacture, this bench bracket gives a clearly specified hardware choice. Apply these verified details to match the Rivera Bench Support Bracket to seating spans that call for defined load capacity and a compact black support profile.
