Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
floating desk bracket from Federal Brace provides a low-profile support solution for floating desks, wall hung counters, or cantilevered shelves where visible structure needs to stay minimal. This workstation and countertop bracket is made from 0.25 inch steel, so the arm and mounting plate deliver rigid support for heavy work surfaces in everyday use. The bracket measures 22.75 inches long by 3.25 inches wide by 6.50 inches high, giving you a substantial bearing surface under deeper desks or counters. A black powder coated matte finish keeps the bracket visually discreet against darker walls or tops while adding a layer of protection to the steel in typical indoor environments. Classified as a workstation and countertop bracket, it is suited to supporting working surfaces rather than light decorative ledges.
The floating desk bracket installs on the face of the stud, so the mounting plate bears directly over solid framing rather than just sheathing. Six 0.26 inch straight holes in the bracket provide clear locations for fasteners into the stud and up into the desk or counter material, helping maintain alignment between brackets. Holes on the supporting arm allow counter or shelf material to be tied in with fasteners instead of adhesive, so the top stays mechanically connected to the steel support during loading. The bracket is identified under manufacturer part number FB-00734, simplifying job takeoffs and reorders when multiple brackets are required across a run.
This floating desk bracket is described for use when a low-profile support is needed to carry a floating desk or wall hung counter, so it suits applications where open leg space or a clean wall look is important. Its classification as a workstation and countertop bracket aligns it with work surfaces that see regular use rather than light-duty accent shelving. Because the bracket can carry 500 pounds each, it fits installations where heavy counters, dense worktops, or significant equipment loads are expected along the wall run. The cantilever design allows desks, counters, or shelves to project from the wall without front supports, supporting layouts where floor space or wheelchair clearance under the surface is required.
Installing the bracket on the face of the stud places the 3.25 inch wide mounting plate directly over framing, helping each 0.26 inch hole accept a fastener path into solid wood for consistent holding strength. The 22.75 inch length of the supporting arm gives fabricators a known depth reference when sizing floating desks or counters, so multiple brackets can be laid out to the same projection with repeatable accuracy. Holes on the supporting arm allow the work surface to be fastened down at several points, which helps keep tops from shifting over time and maintains consistent reveals along walls or cabinetry. The 0.25 inch material thickness in the steel body maintains bracket stiffness across long runs, so installers can align a series of brackets and expect similar performance from each location. The black powder coated matte finish creates a uniform appearance across brackets on a project, supporting visually consistent installations when multiple supports are exposed beneath darker tops.
The floating desk bracket is made from 0.25 inch steel with a black powder coated matte finish, which provides a solid structural core with a protective and low-glare exterior surface.
The floating desk bracket has a carry capacity of 500 pounds each, allowing designers to plan heavy desks, counters, or shelves while staying within the stated load rating.
The Federal Brace bracket measures 22.75 inches in length, 3.25 inches in width, and 6.50 inches in height, which suits deeper floating desks and wall mounted counters.
The bracket is installed on the face of the stud using six 0.26 inch straight holes, so fasteners pass through the mounting plate directly into the wall framing.
The supporting arm has holes that allow the counter or shelf material to be tied in with fasteners, creating a mechanical connection instead of relying on adhesive.
The bracket uses manufacturer part number FB-00734, which identifies this specific 22.75 inch black floating desk and countertop support from Federal Brace.
This 6-1/2 inch by 22-3/4 inch floating desk bracket from Federal Brace combines a 0.25 inch steel body, 500 pound capacity, and a black powder coated matte finish for wall mounted desks, counters, or shelves. With face-of-stud installation and holes for fasteners through the 22.75 inch arm, it supports solid connections between framing and work surface. For floating workstation, counter, or shelf layouts that call for low visual impact and a defined carry rating, this bracket provides a clearly specified support option.