Omega National White Oak 2-1/2" x 10" x 36" Floating Shelf, FS01367UF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS01367UF1 to RSFS01367UF1.

Omega National White Oak Floating Shelf For Clean Lines

Omega National white oak floating shelf is a 2-1/2 inch thick, 10 inch deep, 36 inch wide wood shelf designed for concealed mounting in transitional and contemporary kitchen and bath styling, so wall runs stay visually clean while still adding storage and display surface. The solid wood and wood veneer construction provides a true wood shelf body that works well where exposed edges and grain are part of the design. The ready-to-finish rift white oak surface lets you apply your preferred finish system so the shelf can visually match surrounding cabinetry or casework. The shelf can be trimmed from 10 inches down to a 2 inch depth, which helps fit tight wall returns or align with existing cabinet depths in the field. The integrated hanging system safely supports 15 lb per running foot of shelf length, which exceeds KCMA requirements and supports typical dishware or decor loads within that rating.

Key Floating Shelf Details For Project Planning

• The 2-1/2 inch thick profile creates a substantial floating look that aligns with current kitchen and bath styling while giving enough build height to house the concealed hanging system.
• The 36 inch width and 10 inch starting depth suit common wall cabinet and backsplash spans, so the shelf length works across many kitchen or bath wall sections without extensive cutting.
• The shelf can be trimmed down from 10 inches to a 2 inch depth, letting you size the projection to clear backsplashes, outlets, or doors while keeping a flush alignment with nearby cabinetry.
• The hanging system is rated to safely support 15 lb per running foot of shelf length, exceeding KCMA requirements so a 36 inch shelf can handle typical day-to-day loading within that specification.
• The ready-to-finish rift white oak construction provides a consistent grain pattern that can be stained or topcoated to coordinate with other rift white oak elements on the job.
• Solid wood and wood veneer construction, with paint grade versions built from poplar and MDF, gives a stable surface appropriate for finishing systems used in cabinet and trim work.

Floating Shelf Mounting And Adjustment Considerations

This floating shelf uses a hanging system with brackets and hardware for mounting, so the load transfers back to the wall structure rather than relying on visible supports, which keeps the installation visually minimal. Because the shelves are 2-1/2 inches thick, there is internal room to work with the concealed mounting brackets and hardware during layout. The ability to trim the shelf depth from 10 inches down to 2 inches allows installers to cut the projection to clear tile edges, casing, or other obstacles while keeping the wall-side interface square. The 36 inch shelf length, combined with the 15 lb per running foot load rating, helps plan bracket placement so the installed shelf carries expected working loads within the specified capacity.

Using This FS01367UF1 Shelf In Real Projects

Where This White Oak Floating Shelf Works Best

This FS01367UF1 floating shelf is specified at 36 inches wide, 10 inches deep, and 2-1/2 inches thick, which suits many kitchen and bath wall applications where a single span of open storage is needed between cabinets or over fixtures. The rift white oak material matches projects calling for rift white oak doors, frames, or paneling, so the shelf can read as part of the same design language. As a member of the Shelf, Closet & Garage Organization category, it fits into storage layouts where open shelves supplement enclosed cabinetry. The floating shelves and concealed brackets product class defines it as a clean-front solution that avoids exposed support hardware, which is useful when the design intent is a minimal, contemporary appearance. Made in the USA manufacturing gives a domestic source for projects that specify American-made wood components, which can matter on commercial or residential specifications that call out origin.

Why The FS01367UF1 Details Support Repeatable Results

The 15 lb per running foot load rating, exceeding KCMA requirements, gives a clear load reference for layout and use, so multiple shelves on a wall can be planned with consistent expectations about what they will safely hold when used within that rating. The ability to trim the shelf depth from 10 inches down to 2 inches means one SKU can adapt to different wall projections across a job, improving consistency of appearance while still responding to variable site conditions. The solid wood and wood veneer construction, and paint grade options using poplar and MDF, provide known woodworking substrates for sanding, staining, or painting, which supports predictable finishing workflows. The complete turn-key system with floating shelf, hanging brackets, and hardware for mounting defines a single part number that addresses both the shelf body and its concealed support method, simplifying specification as FS01367UF1 across drawings, ordering, and installation notes.

Common Questions About This Floating Shelf Setup

Select The FS01367UF1 Shelf For Matching Installations

The Omega National FS01367UF1 floating shelf pairs a 36 inch width, 10 inch trim-to-2 inch depth range, and 2-1/2 inch thickness with a concealed hanging system rated at 15 lb per running foot, so designs can balance appearance and load planning. The ready-to-finish rift white oak surface and solid wood and wood veneer construction let the shelf visually match rift white oak kitchens and baths while staying within a single specified part number. For projects requiring open wall storage that aligns with transitional and contemporary styling, this floating shelf provides a defined size, material, and rating set that supports straightforward specification and installation.