
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0136MUF1 to RSFS0136MUF1.
Omega National maple floating shelf gives a 36 inch wide by 10 inch deep storage surface that mounts without visible supports, so wall runs stay clean while still offering a practical place for dishes, supplies, or display pieces in kitchens and baths. The 2-1/2 inch thick shelf profile creates a substantial look on the wall, which helps this unit match transitional and contemporary styling while still working alongside framed cabinetry. Solid wood and wood veneer construction builds the shelf body from wood materials rather than metal or plastic, so finishing, sanding, and edge detailing follow the same steps as other shop-made wood components. The maple version arrives ready-to-finish, allowing stain or clear topcoats to be matched to surrounding casework, trims, or doors for a unified run. Omega National Products manufactures this FS0136MUF1 shelf in the USA, supporting consistent sizing and construction from job to job.
The Omega National maple floating shelf uses a hanging system with dedicated brackets for mounting, so the structural load transfers back to the wall through these components rather than through exposed corbels. Because the shelf is 2-1/2 inches thick, the depth of the body conceals the bracket structure, allowing the visible portion to read as a simple wood slab during final inspection. The hanging system is designed to work with the 15 lb per running foot rating, so positioning brackets according to manufacturer guidance maintains the stated capacity across the 36 inch run. Field trimming down to a 2 inch depth lets installers rip the back edge or front edge as required by layout, keeping alignment with tiles, panels, or window casings. The ready-to-finish maple surface accepts stains or clear coats, which helps match surrounding Omega National maple components or other woodwork on the project.
The FS0136MUF1 floating shelf sits in the Omega National Products line of floating shelves and concealed brackets, so it is intended for jobs where visible shelf supports are not part of the design. With a 36 inch width, it suits typical cabinet module spacing in kitchens, where installers often have 36 inch bases or openings that align cleanly with this span. The 10 inch depth works over standard counters, as it stays shallower than a typical countertop while still offering functional storage for plates, glasses, or canisters. Because the shelf can be trimmed down to 2 inches in depth, it also adapts to narrower bath or hallway areas that cannot accept a full 10 inch projection. The rift maple face matches other maple offerings in Omega National wood options, so this shelf behaves as part of a coordinated wood program when the same species appears on doors, drawer fronts, or panels.
The 2-1/2 inch thick shelf body provides enough interior space to work with the hanging brackets, so once fastened, the shelf sits flush to the wall and hides the mounting hardware for a clean finished line. Because the hanging system safely supports 15 lb per running foot of shelf length, designers can specify multiple shelves in a vertical stack knowing the rating exceeds KCMA requirements, which helps control deflection and long-term sag. The option to trim to a 2 inch depth simplifies field changes when wall conditions or tile layouts shift slightly from the drawings, as installers adjust depth on site instead of reordering components. Solid wood and wood veneer construction lets fabricators rout edges, ease corners, or drill as they would with other casework parts, so workflow stays familiar in the shop and on the bench. The USA manufacturing noted for this shelf supports repeatable sizing and wood quality from order to order, which helps maintain alignment across multiple units in the same room.
The FS0136MUF1 floating shelf is 36 inches wide, 10 inches deep, and 2-1/2 inches thick, so it spans a common cabinet bay while still fitting comfortably above standard counters.
The hanging system safely supports 15 lb per running foot of shelf length, giving this 36 inch shelf a load rating that exceeds KCMA requirements for typical kitchen and bath use.
The shelf depth can be trimmed to 2 inches, allowing on-site adjustment of projection so installers can match tight wall conditions or coordinate with nearby panels.
This floating shelf uses solid wood and wood veneer construction, while the paint grade version uses poplar and MDF, which supports standard woodworking finishing and machining operations.
The maple shelf is offered ready-to-finish, so stains or clear coatings can be applied to coordinate color and sheen with surrounding cabinets or trim.
The FS0136MUF1 floating shelf is made in the USA, supporting consistent construction and sizing for repeated use across multiple projects.
The Omega National maple floating shelf FS0136MUF1 matches projects calling for a 36 inch wide, 10 inch deep wall shelf with concealed support and a substantial 2-1/2 inch profile. The 15 lb per running foot load rating, exceeding KCMA requirements, suits everyday kitchen or bath storage demands without resorting to visible brackets. Depth trimming down to 2 inches gives flexibility when wall layouts or clearances tighten during build-out. With solid wood and wood veneer construction in a ready-to-finish maple surface, this USA-made shelf integrates smoothly into woodworking workflows and allows finish matching to surrounding casework, making it a practical choice for both professional shops and serious DIY installations.
Sold In: 1 Each