Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0124QUF1 to RSFS0124QUF1.
Omega National alder floating shelf gives you a solid wood, wall-mounted shelf sized at 2-1/2 inches thick, 10 inches deep, and 24 inches long, so you get a substantial open-storage surface that suits kitchen, bath, closet, or garage organization layouts. The shelf uses solid wood and wood veneer construction, so the core structure supports normal residential loads while presenting a wood surface ready for finishing work. Because this alder shelf is ready-to-finish, it accepts your stain or clear coat system to match surrounding cabinetry and trim without factory color limits. The design is part of Omega National Products floating shelves and concealed brackets family, so it is built specifically for concealed wall mounting rather than adapted from conventional shelf boards. This floating format leaves the front and underside clear of visible supports, so you gain usable space without bracket interference.
This floating shelf is part of a turn-key wall-mounted system that uses dedicated hanging brackets for concealed support, so the wall connection is engineered for this exact 2-1/2 inch thick, 24 inch long shelf profile. With a 10 inch starting depth that can be trimmed down to 2 inches, installers can crosscut or rip the shelf depth to match specific layouts while keeping the 24 inch span where that dimension fits between cabinets or wall features. The 15 lb per running foot load rating gives a clear guideline for how the shelf performs in service, so designers and builders can allocate typical items along the shelf without guesswork about structural intent.
This Omega National alder floating shelf fits todays transitional and contemporary kitchen and bath styling, so it supports open-shelf plans where wall cabinets are reduced or broken up. The ready-to-finish alder surface lets you match existing cabinet finishes or leave a natural tone, which is useful when tying together mixed-wood or painted-and-wood combinations. Because the shelf is 2-1/2 inches thick, it visually aligns with modern, chunky shelf designs often used over backsplashes, near ranges, or beside mirrors. The 24 inch length works as a single accent shelf in a niche or as a repeating module, so you can line up multiple shelves between vertical cabinets or walls for a consistent rhythm. When used in closet or garage organization layouts, the 10 inch depth before trimming suits smaller items and shallow wall sections where deeper shelves might project too far into the space.
The 15 lb per running foot load rating means this 24 inch shelf is designed to carry a distributed load along its span, so you can assign dish stacks, jars, or folded towels across the length with a known performance baseline. Exceeding KCMA requirements signals that the combined shelf and hanging system are engineered for cabinet-industry expectations, which matters when specifying open shelving in kitchens subject to repeated daily use. Solid wood and wood veneer construction (with poplar and MDF used only on paint grade versions in the overall offering) gives this alder model a wood-based structure, so field cuts, routing of shallow edge breaks, and sanding operations stay within suitable material. The ability to trim the depth from 10 inches down to 2 inches lets you tune the projection from the wall, which is important when aligning shelves with tile terminations, window casings, or clearance around faucets and fixtures.
The Omega National FS0124QUF1 shelf is 2-1/2 inches thick, 10 inches deep, and 24 inches wide, so planning layouts can rely on those dimensions for spacing and alignment.
The hanging system safely supports 15 lb per running foot of shelf length, so this 24 inch shelf is engineered for everyday storage and display loads when properly mounted.
The shelf depth can be trimmed from 10 inches down to 2 inches, so installers can tailor projection from the wall to match specific clearances or design lines.
This floating shelf uses solid wood and wood veneer construction in alder for this model, so cut edges and finished surfaces stay within a wood-based structure.
The hanging system exceeds KCMA requirements, so its load rating aligns with established cabinet-industry performance expectations for open shelving in kitchens and baths.
The FS0124QUF1 floating shelf is made in the USA, which matters for projects prioritizing domestic manufacturing and consistent supply from Omega National Products.
This Omega National alder floating shelf pairs a 24 inch length, trim-to-fit 10 inch depth, and 2-1/2 inch thick profile with a 15 lb per running foot hanging system, so it fits open-shelf designs that need concealed support and predictable performance. The solid wood and wood veneer construction in alder arrives ready-to-finish, so shop teams can integrate it into coordinated kitchen, bath, closet, or garage runs without changing existing finishing systems. For layouts that match these dimensions and load expectations, adding this FS0124QUF1 shelf keeps projects aligned with contemporary styling and cabinet-industry standards.
Sold In: 1 Each
