Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0142XUF1 to RSFS0142XUF1.
Omega National paint grade floating shelf is a solid wood and wood veneer shelf built for exposed storage and display in kitchen, bath, closet, or garage layouts where a concealed support look matters. The 2-1/2 inch thick profile creates a substantial shelf that visually aligns with transitional and contemporary styling, so it integrates cleanly with flat-panel doors and minimal trim. The 10 inch standard depth gives room for dishes, folded towels, or bins while staying manageable on wall runs. The 42 inch width suits common cabinet spans, letting you bridge between wall cabinets or stand alone on finished walls. Paint grade construction in poplar and MDF takes primer and paint consistently across the face and edges, helping installers deliver a smooth, uniform finish that matches surrounding millwork. As part of the Omega National Products line, this shelf fits into professional woodworking projects focused on built-in, furniture-like results.
The complete turn-key system uses a hanging system rated to safely support 15 lb per running foot of shelf length, so a 42 inch shelf is built for loads aligned with typical KCMA expectations in kitchen and bath environments. That load rating exceeds KCMA requirements, giving installers a defined performance figure when planning dish stacks, containers, or decorative items. The integrated hanging brackets are designed specifically for this floating shelf format, which lets the support hardware stay concealed while carrying the load into the wall. With the shelf engineered around this system, bracket placement and shelf dimensions work together to create a rigid assembly once mounted. For projects that involve multiple floating runs, using the same system helps maintain consistent deflection performance across all installed shelves on a job.
The Omega National Products FS0142XUF1 shelf is suited to transitional and contemporary kitchen and bath styling, so it works well as open wall storage near full-height cabinets or over counters where closed uppers are reduced. The 42 inch width fits many common cabinet bay sizes, allowing installers to carry lines from adjacent wall cabinets onto the floating run for a continuous visual band. In closets and garage organization layouts, the 10 inch depth keeps items close to the wall, helping preserve aisle space while still supporting small boxes, folded garments, or labeled bins. Solid wood and wood veneer construction means the shelf presents as furniture-grade millwork, making it suitable for visible living areas rather than only utility spaces. Because the shelf is paint grade, the same unit can be used across multiple rooms and finished in different colors to match each space while keeping dimensions consistent.
The shelves are 2-1/2 inches thick x 10 inches deep and can be trimmed to 2 inches depth, giving flexibility when walls, tile, or trim call for a slightly shallower profile. That trim-to-depth capability lets installers adjust projection to clear window casings or tile edges while still maintaining the floating look. The concealed hanging brackets integrate with the shelf thickness, so alignment along a wall run is driven by the bracket layout rather than surface-mounted hardware. Because the hanging system safely supports 15 lb per running foot of shelf length, installers can plan fastening and spacing knowing the shelf has been engineered around that load. The paint grade combination of poplar and MDF helps seams and machined edges finish smoothly when field trimming to 2 inch depth, supporting crisp paint lines. Made in the USA manufacturing provides consistent sizing from shelf to shelf, helping multi-shelf runs stay level and visually aligned.
The FS0142XUF1 shelf is 2-1/2 inches thick, 10 inches deep, and 42 inches wide, so it matches common wall spans and provides a substantial floating profile for storage and display.
The shelf is 10 inches deep and can be trimmed to 2 inches depth, which helps adapt projection to tile lines, casings, or tight walkways while keeping the floating appearance.
The hanging system safely supports 15 lb per running foot of shelf length, exceeding KCMA requirements, so a 42 inch shelf is designed for typical kitchen and bath stored loads.
The paint grade shelf uses solid wood and wood veneer, with paint grade specifically described as poplar and MDF, giving a smooth, finish-ready surface for painted projects.
The Omega National FS0142XUF1 floating shelf is made in the USA, supporting consistent production quality and sizing for professional cabinetry and woodworking installations.
The shelf is described as perfect for transitional and contemporary kitchen and bath styling, so it aligns with cleaner lines, minimal ornamentation, and open wall storage layouts.
The Omega National paint grade floating shelf FS0142XUF1 combines a 42 inch width, 10 inch depth, and 2-1/2 inch thick profile with a hanging system rated at 15 lb per running foot, so it fits projects where exposed storage must meet KCMA-related performance. Paint grade poplar and MDF construction, in a solid wood and wood veneer build, supports a high-quality painted finish alongside existing cabinets and trim. For kitchen, bath, closet, or garage organization, this floating shelf gives installers a consistent, turn-key system to integrate into wall runs. Put this shelf to work wherever a clean, contemporary floating look and defined load rating will benefit your layout.
Sold In: 1 Each
