Omega National White Oak 2-1/2" x 10" x 42" Floating Shelf, FS01427UF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS01427UF1 to RSFS01427UF1.

Omega National White Oak Floating Shelf For Clean Storage

Omega National white oak floating shelf is a 2-1/2 inch thick x 10 inch deep x 42 inch long solid wood shelf that creates a clean, bracket-free look, which lets kitchen and bath wall runs stay visually open while still adding usable storage space. The shelf is built from solid wood and wood veneer construction, so the load is carried by a stable core, which supports everyday use in residential cabinetry and wall storage layouts. The rift white oak material delivers a straight-grain face, which sands and finishes to a consistent, linear appearance for contemporary or transitional projects. This shelf is offered ready-to-finish in rift white oak, so installers can stain or clear-coat it on-site to match or coordinate with surrounding cabinetry, millwork, or flooring in the same job.

Floating Shelf Details That Support Real Projects

• The shelf is 2-1/2 inches thick, which gives the concealed hanging system enough depth to be buried inside the shelf body, keeping mounting hardware out of sight while maintaining a substantial-looking edge profile on the wall.
• The 10 inch standard depth provides a practical surface for typical kitchen and bath items, helping installers align the shelf projection with upper cabinets and backsplashes for a consistent front line along the wall.
• The shelf can be trimmed to a 2 inch depth, allowing field adjustment to match tighter spaces or shallow walls, so the same part number can serve multiple design conditions without changing the core construction.
• The hanging system safely supports 15 lb per running foot of shelf length, so this 42 inch shelf is engineered for typical residential loads while exceeding KCMA requirements for strength expectations in kitchen and bath installations.
• The product is made in the USA by Omega National Products, which means the shelf and its matching hanging system are produced as a coordinated kit under one specification for repeatable performance across multiple installs.

Floating Shelf Hanging And Mounting Performance

The FS01427UF1 floating shelf uses a hanging system with brackets and hardware for mounting, so the shelf ties back into wall framing through a concealed structure while leaving the shelf surface free of visible supports. Because the hanging system is rated for 15 lb per running foot of shelf length, installers can plan loading and spacing along the wall knowing the assembly is designed for that distributed weight. The 2-1/2 inch thickness gives the internal hardware room to engage the wall and shelf body, which supports a rigid feel once the shelf is hung and tightened. With a 10 inch depth that can be trimmed to 2 inches, the same mounting approach carries through even if the front edge is cut back, keeping the concealed support strategy consistent.

Using This Rift White Oak Floating Shelf In Projects

Where This FS01427UF1 Rift White Oak Shelf Fits

This floating shelf is categorized under Shelf, Closet & Garage Organization and Floating Shelves, so it is suited to wall-mounted storage runs in kitchens, baths, closets, and similar residential spaces where open shelving is desired. The rift white oak, ready-to-finish face allows the shelf to be used alongside other rift white oak components, supporting visual alignment with doors, drawer fronts, or trim that share the same straight-grain pattern. With a 42 inch width, the shelf spans a moderate wall section, which works well between cabinets, over counters, or on accent walls where a single, continuous run is specified. The 10 inch depth aligns with common upper-cabinet depths better than narrow ledges, letting items sit fully on the shelf while maintaining a controlled projection into the room.

Why The Construction And Rating Support Consistent Results

The solid wood and wood veneer construction means the shelf body is engineered from wood-based materials end to end, which provides a familiar substrate for sanding, staining, and topcoating during finishing. Because the paint grade option in the line is poplar and MDF, the rift white oak version stands out for its hardwood face, which responds predictably to stains and clear finishes for a natural wood presentation. The hanging system rating of 15 lb per running foot, exceeding KCMA requirements, gives designers and installers a quantifiable basis for planning what gets stored, supporting predictable performance over the full 42 inch span. The ability to trim the shelf depth down to 2 inches uses the same core material for custom sizing, so edge finishing and structural behavior remain consistent when adapting the shelf to different wall conditions on the same project.

Common Questions About The FS01427UF1 Floating Shelf

Selecting This White Oak Floating Shelf For Your Job

The Omega National FS01427UF1 floating shelf combines a 42 inch rift white oak body, 2-1/2 inch thickness, and a 10 inch depth that can be trimmed, so a single part covers many wall layouts. The hanging system with brackets and hardware for mounting is rated at 15 lb per running foot, giving a clear load basis for design and installation. For projects calling for ready-to-finish rift white oak in a clean, bracket-free presentation, this floating shelf is built to integrate into transitional and contemporary kitchen, bath, closet, and general wall-storage plans.