Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0142HUF1 to RSFS0142HUF1.
Omega National Hickory floating shelf FS0142HUF1 is a solid wood and wood veneer shelf designed for use in todays transitional and contemporary kitchen and bath styling, so it brings a clean, modern look to wall storage runs. The shelf measures 2-1/2 inches thick by 10 inches deep and 42 inches wide, giving a substantial appearance that suits open wall spans where a visible bracket would distract. The shelf can be trimmed to a 2 inch depth, allowing the installer to adjust the projection to line up with adjacent cabinets or to clear obstacles. Hickory construction with wood veneer provides a natural grain that takes finish well, supporting stain or clear topcoats to match surrounding millwork. As part of Omega National Products floating shelves and concealed brackets class, this shelf is built specifically for concealed mounting rather than retrofitting a standard board.
The FS0142HUF1 floating shelf uses a hanging system that safely supports 15 lb per running foot of shelf length, so a 42 inch span is engineered for distributed loads along the wall without relying on exposed supports. This load rating exceeds KCMA requirements, which speaks to the shelf and bracket system being designed for residential cabinet environments where dishware, containers, or bath supplies add up over time. The product is positioned as a complete turn-key system with floating shelf, hanging brackets, and hardware for mounting, so the mounting method is integrated into the shelf body rather than a separate, improvised support. Being part of Omega National Products floating shelves and concealed brackets category, the shelf is intended to sit flat against the wall while the brackets stay hidden, supporting the clean, floating look across a kitchen or bath wall.
This Omega National hickory floating shelf is designed for kitchen and bath styling with transitional and contemporary aesthetics, which makes it suitable above counters, between cabinets, or over fixtures where visible supports would interrupt tile or backsplash lines. The 42 inch width works well over standard base cabinet runs or in bath scenarios where a single, continuous shelf provides enough space without needing multiple shorter pieces. Its 10 inch depth balances usable surface area with clearance over faucets, backsplashes, or control valves in typical residential layouts. Because the shelf can be trimmed to a 2 inch depth, it can be adapted to shallower wall areas, such as above a narrow vanity or along a side wall where doors or casings limit projection. Hickory grain and wood veneer allow the shelf to visually tie into hickory cabinets or accents, so the wall storage can read as part of the same millwork package.
The FS0142HUF1 hanging system is rated for 15 lb per running foot of shelf length, which means each 42 inch shelf is engineered to carry typical kitchen or bath loads when weight is spread along the span. Exceeding KCMA requirements shows that the load capacity is aligned with standards used in cabinet construction, so installed shelves are suited to everyday use in those spaces. The 2-1/2 inch thick shelf body gives enough internal depth for concealed brackets, allowing the support hardware to remain hidden while the visible edge stays proportional to adjacent cabinetry. Being a solid wood and wood veneer construction lets the shelf be sanded and finished so the final surface matches surrounding doors, face frames, or trim in tone and sheen. The range of species offered in the broader line - ready-to-finish rift white oak, maple, cherry, alder, paint grade, oak, and hickory - underscores that this hickory model fits into a coordinated family, which helps maintain consistency when multiple rooms or elevations use floating shelves.
The FS0142HUF1 shelf is 42 inches wide, 10 inches deep, and 2-1/2 inches thick, so it presents a substantial floating profile suited to many kitchen and bath wall spans.
The Omega National Hickory floating shelf can be trimmed to a 2 inch depth, allowing you to reduce projection to suit tighter walls or align with nearby trim.
The FS0142HUF1 hanging system safely supports 15 lb per running foot of shelf length, so the load rating covers typical kitchen and bath items when spread along the span.
This floating shelf uses solid wood and wood veneer construction in hickory, providing a finish-ready surface that coordinates with hickory cabinets or trim.
The FS0142HUF1 floating shelf is made in the USA, supporting consistent production quality for projects using multiple shelves in visible locations.
The concealed hanging system and 2-1/2 inch thick profile create a clean, floating look that fits todays transitional and contemporary kitchen and bath designs.
The Omega National Hickory floating shelf FS0142HUF1 combines a 42 inch width, 10 inch depth, and 2-1/2 inch thick profile with a concealed hanging system that supports 15 lb per running foot, giving you a finished, turn-key option for open kitchen or bath wall storage. Hickory solid wood and veneer accept finish to match surrounding millwork, while the ability to trim depth to 2 inches helps adapt one part number across different wall conditions. For projects calling for a coordinated floating solution within Omega National Products floating shelves and concealed brackets line, this hickory model offers a straightforward way to add functional, visually integrated storage.
Sold In: 1 Each
