Omega National Maple 2-1/2" x 10" x 42" Floating Shelf, FS0142MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0142MUF1 to RSFS0142MUF1.

Omega National Maple Floating Shelf For Clean Storage

Omega National maple floating shelf gives a 42 inch wide, 10 inch deep storage surface in a clean, wall-mounted design, so kitchens and baths gain usable space without visible supports. The 2-1/2 inch thick shelf profile provides a substantial look that suits transitional and contemporary styling, helping projects match modern design expectations. Maple construction arrives ready to finish, so stain or clear coat can be matched to surrounding cabinetry for a consistent run of casework. Solid wood and wood veneer construction, with paint grade versions in poplar and MDF, gives a stable, furniture-grade shelf body that suits woodworking projects. Being part of Omega National Products floating shelves and concealed brackets line, this shelf integrates into storage layouts where exposed brackets are not desired.

Key Floating Shelf Details That Help Your Project

• The 42 inch width and 10 inch depth create a practical surface area, so typical dishware, bath items, or display pieces have enough room while keeping the run compact on the wall.
• The 2-1/2 inch thick shelf profile delivers a substantial front edge, which supports a built-in look and helps the floating shelf read as part of the cabinetry rather than a light-duty ledge.
• The shelf can be trimmed to a 2 inch depth from the original 10 inch depth, allowing installers to tailor projection when working around backsplashes, trim, or tight walkways.
• The hanging system safely supports 15 lb per running foot of shelf length, so a 42 inch span carries typical loads while exceeding KCMA requirements for strength in cabinet-related applications.
• Solid wood and wood veneer construction, with paint grade in poplar and MDF, provides a workpiece that sands and finishes like standard cabinet components, making finishing and touch-ups straightforward.
• Offered as part of a floating shelves and concealed brackets category, this unit supports designs where visible shelf brackets would conflict with clean-lined kitchen, bath, closet, or garage layouts.

Floating Shelf Mounting And Finish-Ready Details

The hanging brackets and hardware for mounting give the shelf a dedicated support interface, so installers can anchor to structure while keeping the finished shelf surface free of visible fasteners. The hanging system is engineered to safely support 15 lb per running foot of shelf length, which lets the 42 inch shelf carry normal kitchen and bath contents while maintaining a concealed-bracket aesthetic. Shelves are supplied ready to finish in maple, rift white oak, cherry, alder, paint grade, oak, or hickory, so finishing workflows can match existing wood species across an installation. Solid wood and wood veneer construction lets installers sand edges and apply stain or paint using familiar cabinet finishing processes.

Using The FS0142MUF1 Shelf In Real Projects

Where This 42 x 10 Maple Floating Shelf Fits

The FS0142MUF1 42 inch wide by 10 inch deep shelf size fits wall sections where a single floating run is needed over counters, dressers, or work areas in kitchens and baths. The 2-1/2 inch thickness supports transitional and contemporary styling, so the shelf matches modern casework with straight lines and minimal hardware. Because shelves in this line are offered in maple, rift white oak, cherry, alder, paint grade, oak, and hickory, designers can carry the same floating shelf concept from kitchens into closets or garage organization using matching or complementary species. Solid wood and wood veneer construction, with paint grade as poplar and MDF, allows the shelf to be integrated into woodworking projects that rely on typical cabinet-grade materials.

Why The Hanging System And Depth Matter

The hanging system that safely supports 15 lb per running foot of shelf length lets the 42 inch shelf handle normal everyday loading while still using concealed support, so there is no need to break the clean wall line with exposed brackets. This load rating exceeding KCMA requirements gives confidence when specifying the shelf alongside standard cabinets in a run. The ability to trim the original 10 inch depth down to 2 inches gives flexibility when adjusting projection to clear doors, window trim, tile, or closet components, which reduces layout compromises on site. Having a 2-1/2 inch thick front profile means that even after trimming depth, the shelf retains a strong visual presence, so shallower installations still look intentional instead of like cut-down stock. Made in the USA, this floating shelf suits projects that call for domestic manufacture alongside other cabinet and millwork components.

Common Questions About The FS0142MUF1 Floating Shelf

Selecting This Shelf For Your Next Install

The Omega National maple floating shelf with a 42 inch width, 10 inch depth, and 2-1/2 inch thickness offers a ready-to-finish, concealed-bracket solution suited to transitional and contemporary layouts. With a hanging system rated at 15 lb per running foot and depth that can be trimmed to 2 inches, it adapts to many kitchen, bath, closet, and garage wall conditions. For projects requiring solid wood or wood veneer construction in a clean floating format, this FS0142MUF1 model from Wurth Baer Supply provides a straightforward path from rough wall to finished storage.