
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0124XUF1 to RSFS0124XUF1.
Omega National paint grade floating shelf is a 2-1/2 inch thick by 10 inch deep by 24 inch wide wall-mounted shelf designed for transitional and contemporary kitchen and bath styling, so it creates a clean, open look in finished cabinetry layouts. The shelf is built as a complete turn-key system with a floating shelf and hanging brackets for mounting, which streamlines layout and installation on the wall. The hanging system safely supports 15 lb per running foot of shelf length, so a 24 inch section is rated for typical dishware or bath items within that load range. This model is part of the Omega National Products floating shelves and concealed brackets category, giving it a concealed support appearance that keeps hardware out of sight once installed.
This Omega National Products floating shelf uses a hanging bracket mounting system, so the installer mounts the brackets to the wall and slides the shelf over them for a concealed support appearance. Because the shelf is 10 inches deep and can be trimmed to 2 inches depth, the installer can set projection to coordinate with backsplashes, window trim, or cabinet faces without changing the basic mounting method. The 15 lb per running foot rating is built around the hanging system and shelf construction, so when shelves are spaced on a wall, each run can be planned to carry predictable, evenly distributed loads.
The Omega National paint grade 2-1/2 inch by 10 inch by 24 inch floating shelf is designed for todays transitional and contemporary kitchen and bath styling, so it fits well above counters, between cabinets, or beside mirrors where a clean span is needed. Its 24 inch width matches many cabinet-module and stud-spacing scenarios, which helps position the hanging brackets across typical framing or backing in wall construction. The paint grade construction using poplar and MDF creates a smooth base for painted finishes in kitchens and baths, so it can visually tie into painted cabinet doors, face frames, or trim. Because it is part of the floating shelves and concealed brackets product class, it delivers an open-shelf look without visible front supports in these spaces.
The hanging system safely supporting 15 lb per running foot of shelf length provides a clear load guideline, so installers can plan how many shelves to use and what items to place on a 24 inch section without overloading the run. The 2-1/2 inch thick shelf profile adds vertical stiffness along with a substantial visual edge, which helps the span read as solid while supporting rated loads in normal use. The ability to trim the 10 inch depth down to 2 inches gives flexibility when shelves must align with tile edges, window jambs, or cabinet faces, because the face dimension can be reduced while keeping the 24 inch width and load rating context. Solid wood and wood veneer construction, with paint grade defined as poplar and MDF, delivers a surface that is designed to take paint, which simplifies finishing steps when matching existing shop finishes or on-site color schemes. Being made in the USA adds clear origin information for projects that document domestic sourcing, which can be part of specification requirements on some jobs.
The Omega National FS0124XUF1 floating shelf is 2-1/2 inches thick, 10 inches deep, and 24 inches wide, so it fits typical wall runs while providing a substantial shelf profile.
The hanging system on this floating shelf safely supports 15 lb per running foot of shelf length, allowing straightforward load planning along each installed run.
The shelf depth can be trimmed from 10 inches down to 2 inches, so the projection can be adjusted to align with surrounding finishes or cabinetry while maintaining the 24 inch width.
The paint grade floating shelf uses poplar and MDF in its construction, providing a smooth, consistent surface intended for painted finishes in kitchen and bath projects.
This shelf uses a hanging bracket mounting system within the floating shelves and concealed brackets category, so the support is hidden once the shelf is installed on the wall.
The Omega National FS0124XUF1 floating shelf is made in the USA, which provides clear origin information for projects with domestic sourcing requirements.
The Omega National paint grade 2-1/2 inch by 10 inch by 24 inch floating shelf FS0124XUF1 pairs a 15 lb per running foot hanging system with trim-to-depth flexibility, so it supports practical kitchen and bath storage while aligning cleanly with surrounding finishes.
Sold In: 1 Each