Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0130MUF1 to RSFS0130MUF1.
Omega National maple floating shelf gives a 30 inch wide by 10 inch deep open storage surface that mounts with concealed brackets, so wall space stays clean and usable in kitchens, baths, closets, or garages. The 2-1/2 inch thick construction creates a substantial shelf profile, which helps it visually match todayâs transitional and contemporary cabinet styling in remodels and new installs. Solid wood and wood veneer construction in maple provides a real-wood surface, so finishing can be tuned to surrounding face frames, doors, or trim. The shelf is offered ready to finish, allowing stain, clear coat, or paint systems to be applied on site for color control. This model is part of Omega National Products floating shelves line, giving installers a known product class when planning storage layouts.
The complete turn-key system uses hanging brackets and hardware for mounting, so the floating shelf installs as a concealed support assembly rather than exposed shelf standards. The hanging system safely supports 15 lb per running foot of shelf length, giving this 30 inch shelf capacity for typical kitchen or bath loads when properly laid out along the wall. That rating exceeds KCMA requirements, which is important on cabinet-related work where recognized performance standards support specifications. Because the shelf is 10 inches deep and can be trimmed to 2 inch depth, installers can fine-tune projection for tile walls, plumbing chases, or closet systems while keeping the rated hanging method.
This Omega National maple floating shelf is suited to todayâs transitional and contemporary kitchen and bath styling, so it works well where frameless or clean-faced cabinets are specified. The 30 inch width and 10 inch depth make it a practical span between upper cabinets, over backsplashes, or in narrow wall runs that need open storage. Solid wood and wood veneer construction in maple gives a real-wood surface, so it can be finished to align with maple doors, drawer fronts, or face frames on neighboring cabinets. The ready-to-finish design means the same finishing system used on the rest of the project can be applied, helping the shelf read as part of the built-in work instead of an add-on.
The system is described as a complete turn-key floating shelf with hanging brackets and hardware for mounting, so installers work with a matched shelf-and-bracket set rather than building a support from miscellaneous parts. Shelves are 2-1/2 inches thick x 10 inches deep and can be trimmed to 2 inch depth, which helps achieve tight fits to tile, paneling, or side walls by adjusting depth in the field. The hanging system safely supports 15 lb per running foot of shelf length, giving a clear load guideline when placing glassware, pantry items, or bath products. Because this load rating exceeds KCMA requirements, it aligns with cabinet industry performance expectations for wall-mounted storage. Offered in maple as solid wood and wood veneer construction, the shelf provides a consistent substrate for sanding and finishing, aiding in predictable color and sheen across multiple shelves on the same wall run.
The Omega National maple floating shelf measures 30 inches wide, 10 inches deep, and 2-1/2 inches thick, so it provides a substantial storage surface with a clean floating appearance.
The shelf can be trimmed to 2 inch depth, allowing field adjustment to clear backsplashes, trim, or other surfaces while keeping the 30 inch width and floating look.
The hanging system safely supports 15 lb per running foot of shelf length, so this 30 inch shelf is rated for typical kitchen or bath loads when mounted as designed.
The shelf uses solid wood and wood veneer construction in maple, providing a real-wood surface that accepts stain or clear finishes for cabinet and millwork projects.
The maple floating shelf is offered ready to finish, so finishing systems used elsewhere on the project can be applied for color and sheen consistency.
The hanging system exceeds KCMA requirements, which aligns the floating shelf with recognized cabinet industry performance standards for wall-mounted storage loads.
The Omega National maple floating shelf FS0130MUF1 pairs a 30 inch by 10 inch format with a concealed hanging system, so projects gain open storage without exposed brackets. The 2-1/2 inch thick, solid wood and wood veneer construction in maple arrives ready to finish, allowing field finishing to match surrounding cabinetry. With a hanging system rated at 15 lb per running foot and performance that exceeds KCMA requirements, this floating shelf offers a clearly defined load capability for kitchen, bath, closet, or garage work. Select this model when a turn-key floating shelf system is needed to support clean-lined, transitional, or contemporary layouts.
Sold In: 1 Each
