
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0124OUF1 to RSFS0124OUF1.
Omega National red oak floating shelf is a 2-1/2 inch thick, 10 inch deep, 24 inch wide shelf designed for wall-mounted storage where a concealed support look is required. The red oak material ties into cabinet and trim packages that call for hardwood species, which helps maintain visual consistency across kitchen or bath runs. The shelf is part of Omega National Products floating shelves and concealed brackets category, so it is intended to work as a structural and visual element rather than decorative trim only. The design suits transitional and contemporary kitchen and bath styling, which helps bridge traditional wood grain with cleaner lines. Solid wood and wood veneer construction in this model provide a real-wood work surface, so the shelf can take typical kitchen or bath use without reading as laminate. The 24 inch width suits shorter wall spans or staggered-shelf layouts in residential spaces.
This floating shelf uses a hanging system with brackets and hardware for mounting, so the shelf is designed to slip over or engage concealed supports rather than sit on visible shelf pins. The 2-1/2 inch thickness gives internal space for the concealed hanging brackets, which allows the visible portion to appear as a solid wood block while still carrying the specified load. The 10 inch depth works for many kitchen and bath wall runs, providing room for typical items while staying within common upper cabinet depths. Because the shelf can be trimmed to 2 inch depth, installers can cut it down to suit tighter projections while still using the same hanging system. The 24 inch width defines one standard module, which can be repeated or combined with other widths from the line when laying out wall storage.
This 24 inch wide, 10 inch deep floating shelf is described for todays transitional and contemporary kitchen and bath styling, so it aligns with projects that balance clean lines and natural wood tone. The red oak species works in kitchens using oak doors or face frames, supporting visual continuity between open-shelf areas and closed storage. Because the shelf is part of a floating shelves and concealed brackets product class, it fits locations where visible brackets would conflict with the design intent. The 15 lb per running foot rating supports typical kitchen or bath items within the load class described, so designers can allocate it to everyday-use wall areas instead of treating it strictly as display-only.
The complete turn-key system with shelf, hanging brackets and mounting hardware standardizes how each 24 inch section is hung, which helps installers repeat the same process across multiple locations. By safely supporting 15 lb per running foot and exceeding KCMA requirements, the hanging system provides a defined performance level that can be applied consistently in planning and layout. The 2-1/2 inch thickness keeps enough material around the concealed brackets, supporting stable engagement along the length of the shelf. When trimming depth from 10 inches down to as little as 2 inches, installers can keep the same front edge and finish schedule while adjusting projection to align with backsplashes, appliances, or adjacent cabinet runs. Solid wood and wood veneer construction provide a real-wood substrate for stains or clear finishes, allowing the same finishing process as matching cabinetry so color and sheen can be tuned to each project.
The Omega National FS0124OUF1 shelf is 2-1/2 inches thick, 10 inches deep, and 24 inches wide, so layout and wall space can be planned around those fixed dimensions.
The hanging system for this floating shelf safely supports 15 lb per running foot of shelf length, which exceeds KCMA requirements and guides load planning on the wall.
The shelf can be trimmed from its 10 inch depth down to 2 inches, allowing projection adjustments while maintaining the same product and hanging system across a project.
This red oak model uses solid wood and wood veneer construction, providing a real-wood surface suited to the same stain or clear finish systems used on cabinetry.
The shelf is described as perfect for todays transitional and contemporary kitchen and bath styling, so its sizing and look are geared toward those spaces.
This Omega National floating shelf is made in the USA, which can support projects or specifications that call for domestically manufactured wood components.
The Omega National red oak floating shelf FS0124OUF1 pairs a 24 inch width and 10 inch depth with a concealed hanging system, so it delivers open storage that matches red oak cabinetry and trim. The 2-1/2 inch thick profile and solid wood and wood veneer construction give installers a substantial, ready-to-finish component they can stain or top-coat on site. With a hanging system rated at 15 lb per running foot and depth that can be trimmed down to 2 inches, this shelf adapts to a range of kitchen and bath wall layouts while maintaining the same product family across the job.
Sold In: 1 Each