Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0148OUF1 to RSFS0148OUF1.
Omega National red oak floating shelf is a solid wood and wood veneer shelf designed for wall-mounted storage in kitchens, baths, closets, and similar spaces where a clean, concealed-support look is needed. The shelf measures 2-1/2 inches thick and 10 inches deep, giving installers a substantial profile that reads as built-in when mounted at cabinet runs or feature walls. The 48 inch width provides useful span for dishes, toiletries, or display pieces along a standard wall section without breaking the line with multiple short units. The hanging system safely supports 15 lb per running foot of shelf length, which means a 48 inch shelf is rated for typical kitchen and bath loads while exceeding KCMA requirements for performance. Ready-to-finish red oak construction lets shops match stains or clear finishes to surrounding casework using standard finishing workflows.
This floating shelf is part of a complete turn-key system designed around hanging brackets and hardware for mounting, so the shelf and concealed support work together for proper fit. The concealed hanging system creates the floating look by supporting the 2-1/2 inch thick by 10 inch deep shelf from the wall, leaving the front and underside free of visible hardware and allowing continuous tile or wall finishes. The 48 inch width and trim-to-2-inch depth capability help installers tie the shelf into surrounding cabinets, panels, or walls so reveals, overhangs, and side clearances line up cleanly along a run.
The FS0148OUF1 floating shelf is offered in red oak, aligning well with projects using oak casework or where a visible wood grain is part of the design intent in kitchens, baths, or storage walls. Its 48 inch width suits typical cabinet spans and wall openings, allowing the shelf to sit between uppers, end panels, or returns without needing multiple shorter units. The 10 inch depth supports everyday kitchen and bath items while still working above counters, over backsplashes, or along hallway and closet walls. Because the shelf can be trimmed to a 2 inch depth, it adapts to narrower spaces such as shallow niches or tight side walls while maintaining the same floating shelf appearance.
The Omega National Products floating shelf uses a hanging system that safely supports 15 lb per running foot of shelf length, giving installers a defined load rating to plan around for dishware, containers, or display pieces. The 2-1/2 inch thick profile provides enough height for the concealed hanging brackets to work inside the shelf body, which helps maintain rigidity across the 48 inch span. Solid wood and wood veneer construction in red oak lets the shelf be sanded and finished to match adjacent cabinetry or trim, providing consistent color and sheen across a run. As part of Omega National Products floating shelves and concealed brackets class, this shelf is designed so the shelf body and hanging system operate together, supporting repeatable installation methods across multiple openings or rooms.
The FS0148OUF1 floating shelf is 48 inches wide, 10 inches deep, and 2-1/2 inches thick, so it spans a standard wall section with a substantial front profile suitable for open storage.
The floating shelf can be trimmed to a 2 inch depth, which lets installers adjust projection to match tight spaces, tile lines, or shallow wall conditions while keeping the floating look.
The hanging system safely supports 15 lb per running foot of shelf length, so the 48 inch shelf is rated for typical kitchen and bath loads while exceeding KCMA strength requirements.
The Omega National red oak floating shelf uses solid wood and wood veneer construction, so shops are working with familiar materials that finish and sand like standard red oak components.
The floating shelf is described as perfect for todays transitional and contemporary kitchen and bath styling, so its concealed support and clean lines align with modern layouts.
The FS0148OUF1 floating shelf is manufactured by Omega National Products, which identifies it as part of their floating shelves and concealed brackets product class.
The Omega National red oak floating shelf FS0148OUF1 pairs a 48 inch width with a 2-1/2 inch thick by 10 inch deep profile, giving installers a ready-to-finish component that ties into oak cabinetry and millwork. The complete turn-key system with hanging brackets and hardware for mounting provides the concealed support needed for a true floating look in transitional or contemporary kitchen and bath projects. The 15 lb per running foot load rating and trim-to-2-inch depth capability let you match storage capacity and projection to each opening, so this shelf can be specified confidently wherever a 48 inch red oak floating run fits the layout.
Sold In: 1 Each
