Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFS0142QUF1 to RSFS0142QUF1.
Omega National alder floating shelf gives a clean, wall-mounted storage surface for kitchen, bath, closet, or garage layouts that favor open, contemporary lines. The shelf measures 2-1/2 inches thick, 10 inches deep, and 42 inches wide, so it creates a substantial run of usable space without visible support hardware. Solid wood and wood veneer construction in alder provides a real-wood surface that accepts stains or clear finishes suited to transitional and contemporary styling. The ready-to-finish design lets installers match adjacent cabinetry or trim on site, which helps when tying new shelving into existing work. As part of Omega National Products floating shelves and concealed brackets line, this unit is built as a concealed-support solution rather than a traditional bracketed shelf, keeping the focus on materials and layout instead of hardware.
The FS0142QUF1 floating shelf is supplied as a ready-to-finish alder unit, so finishing work happens after mounting or fitting within the project sequence. Its solid wood and wood veneer build responds well to common sanding and finishing steps, helping installers dial in color and sheen to match nearby cabinetry. The 42 inch width and 10 inch depth are set from the factory to cover many standard spans, while the ability to trim depth to 2 inches gives flexibility at tile backsplashes or tight corners. The integrated hanging brackets work with the shelf body as a system, creating a concealed support structure that locks the shelf plane to the wall while preserving a clean, bracket-free look.
This Omega National alder 42 inch floating shelf fits naturally in transitional and contemporary kitchen and bath layouts where designers call for open wall storage instead of enclosed uppers. The 10 inch depth serves common display and everyday-use zones, from dish stacks near a range to folded towels near a vanity. Because the shelf is part of a floating shelves and concealed brackets product class, it suits projects where hardware must stay out of sight yet still provide dependable wall support. The alder species and solid wood and wood veneer construction give fabricators a surface that stains or clears to coordinate with surrounding doors, drawer fronts, or trim pieces across the room.
The hanging system for this floating shelf safely supports 15 lb per running foot of shelf length, so the 42 inch span is built for regular cabinetry service rather than purely decorative duty. Exceeding KCMA requirements means the load rating aligns with expectations for cabinet components in kitchen and bath environments. The 2-1/2 inch thick profile provides the internal volume needed for the concealed hanging brackets, which helps keep the front edge straight and the shelf plane stable under rated loads. Being able to trim the shelf to a 2 inch depth allows installers to correct for wall conditions or align with architectural elements without losing the engineered strength in the length dimension. Ready-to-finish alder gives control over final color, so repeated installations across multiple rooms or units can share a consistent finish schedule while using the same FS0142QUF1 part number.
The FS0142QUF1 shelf is 2-1/2 inches thick, 10 inches deep, and 42 inches wide, giving a substantial wall shelf footprint suitable for many upper-wall storage runs.
The hanging system safely supports 15 lb per running foot of shelf length, so the 42 inch shelf is rated for typical kitchen and bath loads while exceeding KCMA requirements.
The shelf is 10 inches deep from the factory and can be trimmed to a 2 inch depth, allowing adjustments for backsplashes, corners, or alignment with adjacent cabinets.
The shelf uses solid wood and wood veneer construction in alder, providing a real-wood surface that sands and finishes to coordinate with surrounding millwork.
The shelf is part of Omega National floating shelves and concealed brackets, using a hanging system that supports the load while keeping hardware out of sight.
The ready-to-finish alder and wood veneer surface can be stained or clear-coated, so installers can match existing cabinetry or create coordinated finishes on site.
This Omega National alder floating shelf FS0142QUF1 pairs a 42 inch span with a 10 inch depth, a 2-1/2 inch thick profile, and a concealed hanging system rated at 15 lb per running foot. Ready-to-finish solid wood and wood veneer construction in alder supports on-site finishing tailored to each room. For projects that call for open, contemporary storage using real-wood shelves with engineered load ratings that exceed KCMA requirements, this floating shelf provides a straightforward, part-numbered solution.
Sold In: 1 Each
