Omega National 36"W Maple Waterfall Wall Mount Range Hood, Broan Compatible Liner Included - R30C36SMB1MUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR30C36SMB1MUF1 to RSR30C36SMB1MUF1.

Omega National Maple Waterfall Hood For Wall Installs

Omega National 36 inch maple waterfall hood delivers a contemporary wall mount range hood with modern curves that suits kitchen projects needing clean lines and a defined focal point. The wood range hood is part of the Omega National Products line, so it aligns with other wood range hood components on the job. The maple construction creates a consistent surface that ties in with maple cabinetry when finishing. The waterfall profile shapes the hood so it transitions smoothly from the wall to the front, helping it sit visually balanced over standard cooking areas. This 36 inch width size positions the hood over typical cooktop layouts where a defined capture area is needed. As a wood range hood, it also gives flexibility in finishing so it can be integrated into different cabinet designs.

Work-Ready Details On This Maple Range Hood

• The contemporary design with modern curves creates a smooth front profile, which helps the hood read correctly with flat-panel and other streamlined cabinet door styles on a coordinated run.
• The wall mount range hood configuration focuses the width and height where a cooking surface is usually placed, helping installers center it over ranges in standard upper cabinet layouts.
• The 36 inch size provides coverage over common cooktops, giving designers a predictable footprint when planning cabinet spacing and upper storage around the hood opening.
• The waterfall form factors the shape from wall to front edge, so it visually softens transitions between adjacent cabinets and the hood while maintaining a defined working area.
• The maple material supports a unified appearance when paired with maple cabinetry in the same space, which simplifies finish matching during final finishing schedules for the kitchen.

Installation Details For Wall Mount Hood Fit

The waterfall hood installs easily using a French cleat hanging system, which lets installers set a solid wall-mounted cleat first and then hang the hood body onto it for alignment. This French cleat method allows the hood to be lifted into place and seated onto the cleat rather than held while fastening through the hood body, which can streamline solo or small-crew installation. The 12 inch trimmable top of the hood provides a vertical section that can be cut down, giving flexibility for varying ceiling heights or design preferences. Because the top is trimmable, the hood can be set to meet specific upper dimensions in the layout, helping it align with surrounding cabinet heights or soffits without redesigning the basic hood body.

Using This Wood Range Hood In Kitchen Projects

Where The Omega National Waterfall Hood Fits Best

The Omega National 36 inch maple waterfall hood is a wood range hood suited to wall mount applications where a defined 36 inch space over a cooking surface is allocated in the cabinet design. Its contemporary design with modern curves lets it integrate into projects that favor a modern or transitional look, especially where flat-panel or simple Shaker fronts are used. The maple construction supports use in kitchens where maple is the primary wood species, keeping grain and tone relationships consistent once finished. As a waterfall wall mount range hood, it is set up for locations where the hood must mount directly to the wall rather than to an island structure. The 36 inch dimension serves common range and cooktop widths, which helps keep the hood centered visually over the appliance line while preserving adjacent cabinet widths.

Details That Support Repeatable Hood Installation Results

The French cleat hanging system on this hood provides a two-part mounting approach, allowing the cleat to be fastened to framing at the desired height first, then the hood body to be engaged with the cleat. This approach can support more accurate elevation settings because the cleat can be adjusted before the hood is placed, reducing repositioning of the hood itself. The 12 inch trimmable top of the hood gives installers a fixed maximum height with the option to cut it down, which is useful when aligning the hood with existing cabinet lines or specific ceiling heights. All surfaces sanded to 220 grit and ready to finish means the maple surfaces arrive prepared for finishing steps, allowing finishing operations to move directly into stain or topcoat processes without preliminary sanding passes on the primary faces. This prepared surface condition can help maintain a more uniform finish appearance across the hood and adjacent finished maple components.

Common Questions About This Maple Waterfall Range Hood

Selecting This Hood For Broan Ventilator Projects

This maple waterfall wall mount range hood is suited for use where a 36 inch Omega National wood range hood is planned and a liner that accommodates all Broan ventilators is desired. The French cleat hanging system, 12 inch trimmable top, and surfaces sanded to 220 grit, ready to finish, support straightforward install and finishing steps on site. When a contemporary design with modern curves and maple construction fit the cabinet plan, this hood provides a defined structure for integrating Broan ventilators into a coordinated kitchen layout.