Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National trimmable chimney is the upper extension section that connects a Modern Tapered wood range hood shell to the ceiling, completing the vertical run in unfinished maple so it can be stained or painted to match the surrounding cabinetry.
In most kitchens, the gap between a range hood body and the ceiling varies by ceiling height, soffit depth, and cabinet layout. A chimney extension bridges that gap and keeps the hood from reading as a floating appliance. Because this chimney is trimmable, it can be cut to the exact height needed on the job rather than relying on a fixed dimension. That makes it workable across standard 8-foot ceilings and taller vaulted spaces alike, as long as the final trimmed height falls within the piece's available length.
The chimney is built in maple and ships unfinished, meaning the surface is clean and prepared to receive whatever finish the project calls for. Maple takes stain evenly and paints cleanly, so it can be dialed in to match painted uppers, stained cabinetry, or a custom color without a significant finishing challenge. Because the chimney will sit at ceiling height where it is highly visible, finishing it to match the hood body and surrounding cabinets is the move that makes the whole run look intentional.
This is the right chimney section for a kitchen project that is already specifying or installing a 36-inch Modern Tapered wood range hood from Omega National. Cabinet shops building custom kitchens with a statement hood wall, designers specifying a furniture-grade hood run, and contractors finishing out a kitchen renovation where the hood-to-ceiling gap needs a clean close will all find this a direct fit. The unfinished state means it works best when a finish step is already built into the project schedule, either in the shop before delivery or on-site before the hood goes up.
No. This is the chimney extension only. The Modern Tapered wood range hood body is a separate product. The two are ordered together to complete the full hood-to-ceiling assembly.
No. This chimney is a decorative wood component. It does not include or house a blower, ventilator, or any air-moving hardware. The ventilation unit is selected and ordered separately based on the cooktop and duct requirements.
The chimney ships at its full stated height and is designed to be cut down on-site to fit the ceiling-to-hood gap. Trim from the top to preserve the finished lower profile. The maximum trim amount is not specified in the source data, so measure the installation gap and confirm against the piece's dimensions before cutting.
Yes. This chimney is sized and designed for the 36-inch Modern Tapered series from Omega National. Confirm the hood series and width match before ordering, since chimney sections are series-specific.
A well-finished hood run reads from floor to ceiling as one continuous element. This chimney extension is the piece that completes that run in maple, trimmed to fit and finished to match, so the hood looks built in from the start.
Sold In: 1 Each