Waste Container Pullout Frame Only For 15 Inch Base
Waste container pullout frame only gives installers a dedicated bottom mount frame for building a smooth trash pull-out in a 15 inch base cabinet. The frame is designed for 15 inch base cabinets, so it fits the common cabinet width used in many kitchen layouts and lets you plan openings confidently. A 100 lbs load rating supports typical residential trash use without overloading the hardware during everyday operation. The 12.25 inch wide frame size sets the actual hardware footprint inside the cabinet, which matters when you are working around face frames or interior obstructions. A depth of 22 inches lets the pull-out travel fully inside standard kitchen cabinet depths, maintaining clear access to the bin. A 10 inch height keeps the frame low enough for bin access while still guiding the container during travel.
Key Details That Support Clean Cabinet Layouts
- The bottom mount trash pullout frame design secures directly to the cabinet floor, which helps keep side walls free for other hardware and simplifies layout in tight base cabinets.
- Soft-open and soft-close slides built into the frame control the motion of the pull-out, which reduces slamming and helps protect the cabinet structure over repeated use.
- The silver finish on the frame presents a neutral appearance inside the cabinet, which blends with a range of interior colors and keeps the hardware from visually dominating the opening.
- The frame is sized for either one 36QT or one 52QT waste bin, which lets you match bin capacity to the cabinet location while using the same mounting footprint.
- The 100 lbs load rating provides capacity headroom for a 36QT or 52QT bin, which helps the slides continue to run smoothly under normal trash and recycling loads.
Bottom Mount Waste Frame Sizing And Fit
This Kessebohmer USA Inc frame is specified as 12.25 inches wide, so it occupies that width on the cabinet floor when you set your mounting position. The 22 inch depth defines how far back the assembly reaches inside the cabinet, which is important when you are clearing supply lines or back panels. A 10 inch frame height keeps the moving parts below most drawer openings above, so the pull-out can often be used under existing storage. The design for 15 inch base cabinets lets you standardize this bottom mount trash pullout frame across matching cabinets on a project. A 100 lbs load rating supports the movement of a full 36QT or 52QT bin, which helps the soft-open and soft-close function stay consistent over time.
Using This Waste Pullout Frame In Cabinet Projects
Where This Bottom Mount Trash Pullout Frame Fits
This bottom mount trash pullout frame from Kessebohmer USA Inc is designed for 15 inch base cabinets, making it suitable anywhere that cabinet size is specified, such as kitchen sink bases or general base storage. The 12.25 inch width allows the frame to sit inside the cabinet opening while leaving room for side clearances defined by the cabinet construction. At 22 inches deep, the frame aligns well with standard base cabinet depths, so the pull-out can travel its full stroke without interference at the back. The 10 inch high frame structure keeps the moving hardware compact, supporting installations below drawer stacks or inside full-height door bases where vertical space is shared with plumbing or other components. The option to use either a 36QT or 52QT bin lets you match capacity to the cabinet location while keeping the same frame footprint across multiple bases.
Why The Soft-Open Soft-Close Frame Matters
The integrated soft-open and soft-close slides on this waste container pullout frame only control the motion as the bin is pulled out and returned, which reduces abrupt impacts on the cabinet face and frame. That controlled action protects the 12.25 inch wide frame and slide alignment, helping maintain smooth tracking when the 36QT or 52QT bin is loaded. The 100 lbs load rating works with the soft-open and soft-close function to support heavier trash or recycling without straining the hardware during daily use. Because the unit is a bottom mount trash pullout frame, the load is carried directly by the cabinet floor, which creates a stable base for repeated cycles in high-use areas. The silver finish on the frame delivers a consistent, neutral look that coordinates across multiple installations, making it straightforward to repeat the same detail on several 15 inch base cabinets in one run.
Common Questions About The Kessebohmer Waste Frame
What cabinet size is this waste pullout frame designed for?
This waste container pullout frame only is designed for 15 inch base cabinets, which helps align it with a common base width used in many kitchen layouts.
What are the overall frame dimensions inside the cabinet?
The frame size is 12.25 inches wide by 22 inches deep by 10 inches high, which defines the footprint you allocate on the cabinet floor and in depth.
How much weight can this trash pullout frame support?
The waste container pullout frame only has a 100 lbs load rating, so it is built to handle a 36QT or 52QT bin under typical residential trash loads.
Which bin sizes work with this bottom mount trash pullout?
This bottom mount trash pullout frame is sized for either one 36QT or one 52QT bin, giving flexibility in capacity while using the same frame layout.
What motion do the soft-open and soft-close slides provide?
The integrated soft-open and soft-close slides on the frame guide the pull-out into and out of the cabinet smoothly, which reduces slamming against the cabinet front.
What is the finish and manufacturer of this waste frame?
The frame has a silver finish and is made by Kessebohmer USA Inc under manufacturer part number 2506550102, supporting consistent specification on projects.
Selecting This Frame For 15 Inch Base Cabinets
Choosing this Kessebohmer waste container pullout frame only gives you a defined 12.25 inch wide, 22 inch deep, 10 inch high bottom mount layout for 15 inch base cabinets. The 100 lbs load rating, soft-open and soft-close slides, and silver finish support repeatable, professional results when you standardize trash pull-outs around 36QT or 52QT bins. Selecting this bottom mount trash pullout frame streamlines how you set up waste storage in base cabinets across a job, keeping motion, fit, and appearance consistent from cabinet to cabinet.
