Waste Container Pullout Frame Only with Soft-open & Soft-Close, 12.25"W Anthracite, Bottom Mount, 16 Frames Per Pallet 1 x 36QT or 1 x 52QT

Waste Container Pullout Frame Only For 15 Inch Cabinets

Waste container pullout frame only gives you a dedicated bottom mount frame to build a smooth, hidden trash pull-out in a 15 inch base cabinet. The frame measures 12.25 inches wide, 22 inches deep, and 10 inches high, so it fits inside the cabinet while clearing typical door openings. A 100 lb load rating supports everyday trash loads in either a 36 quart or 52 quart bin setup, so the frame stays within its designed operating range under normal use. Soft-open and soft-close slides are integrated into the frame, so the pull-out starts and finishes its travel in a controlled way, which reduces slamming and helps protect the cabinet structure. The anthracite finish gives the metal frame a dark, uniform appearance that blends with modern cabinet interiors and helps hide everyday marks from normal use.

Key Details That Support Everyday Cabinet Use

• The frame is designed for 15 inch base cabinets, so layout and sizing in standard kitchen runs stay straightforward for both new installations and cabinet retrofits where the opening is already fixed.
• Frame dimensions of 12.25 inches wide, 22 inches deep, and 10 inches high give you a defined footprint, which helps with planning clearances to doors, hinges, and any plumbing or obstacles inside the base cabinet.
• The 100 lb load rating means the frame is engineered to carry typical trash weight, so routine loading and emptying can stay within this capacity for consistent slide performance over time.
• Soft-open and soft-close slides are part of the frame, so the pull-out transitions smoothly at the start and end of travel, which limits shock to the cabinet and gives a controlled feel in daily use.
• The anthracite finish covers the frame with a dark tone, which visually matches many contemporary cabinet interiors and helps the hardware read as a single, finished assembly once installed.

Bottom Mount Trash Pullout Frame Installation Focus

This Kessebohmer USA Inc frame is a bottom mount trash pullout, so it fastens to the cabinet floor and uses that panel as the structural base. The defined 12.25 inch by 22 inch footprint lets you place the frame so that the pull-out travel clears the cabinet face frame or side panels. A 10 inch overall height keeps the frame low inside the cabinet, which helps with lid and bin height planning during layout. Soft-open and soft-close slides integrated into the frame arrive already matched to the frame geometry, so motion and clearances are built around these travel characteristics. The 100 lb load rating applies to this complete frame and slide assembly, tying the installation planning directly to an understood capacity.

Using This Trash Pullout Frame In Kitchen Runs

Where This Bottom Mount Trash Frame Fits Best

This waste container pullout frame only is designed for 15 inch base cabinets, so it fits cleanly into a common kitchen cabinet width used for waste and recycling stations. The 12.25 inch width gives side clearances inside the cabinet carcass, which helps when working around hinge blocks or face frame stiles during layout. A depth of 22 inches lets the frame use much of the cabinet floor front to back, gaining space for either a 36 quart or 52 quart bin while still staying within typical base cabinet depths. The 10 inch frame height keeps the structure compact, which matters when planning vertical space for tall bins, lids, or under-sink plumbing. Its anthracite finish pairs with this concealed location, so the frame reads as a dark, unified component when the door is open. As part of Wurth Baer Supply offerings, this Kessebohmer USA Inc frame fits into professional cabinet hardware assortments.

Why These Kessebohmer Details Support Repeatable Results

The Kessebohmer USA Inc design combines frame and slides into one assembly, so the soft-open and soft-close action is tied directly to the metal frame geometry, helping repeat the same motion characteristics across multiple cabinets in a project. A 100 lb load rating on the frame gives installers a defined capacity target, which supports consistent performance when specifying 36 quart or 52 quart bin use. Because the frame is classified under bottom mount trash pullouts, the mounting style stays consistent across orders, which simplifies drilling patterns on cabinet floors for production or multi-unit work. The measured 12.25 inch width and 22 inch depth let shop drawings capture the exact footprint, helping reduce rework when aligning doors, fronts, and surrounding drawers. The anthracite finish from the factory gives the frame a completed surface, so there is no finishing step on site, which can streamline installation workflow on tight schedules.

Common Questions About This Waste Pullout Frame

Select This Frame For 15 Inch Trash Pullouts

This Kessebohmer USA Inc waste container pullout frame only gives you a defined 12.25 inch by 22 inch bottom mount platform with soft-open and soft-close slides for a 15 inch base cabinet. With a 100 lb load rating and anthracite finish, it fits professional kitchen projects that need a dedicated frame for either a 36 quart or 52 quart trash setup. For jobs sourcing hardware through Wurth Baer Supply, this frame aligns with established kitchen and bath cabinet trash pull-out solutions.