Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Century Components X-Series Edge pilaster standard is a prefinished plywood shelf-support strip sized for base cabinet and shorter wall cabinet installations where a full-height pilaster would be too tall.
Pilaster standards mount to the interior sides of a cabinet to create a vertical row of evenly spaced slots that accept shelf pins, allowing shelves to be positioned and repositioned at different heights. This pilaster is cut to 20-7/8 inches, which suits base cabinet interiors and organizer systems within that height range rather than tall pantry or full-height wall cabinet runs. If the cabinet build calls for adjustable shelving in a base unit or a pull-out bay with a defined interior height, this is the strip that fills that role without needing to be cut down from a taller standard.
The pilaster is built from plywood, which resists warping and holds fasteners consistently along its length. It arrives prefinished, so the face matches a finished cabinet interior without an additional stain or topcoat step on the job. The 1 inch width sits flush in the routed slot or surface-mounts against the cabinet side, keeping the profile low and out of the way of the shelf or organizer riding above it.
Cabinet shops building or restocking X-Series Edge base cabinet runs keep this size on hand for base units where the interior height lands near 20-7/8 inches. It also suits remodelers matching existing Century Components installations where the original pilaster needs to be replaced or the layout calls for an additional strip. Designers specifying adjustable shelving in a lower bank of cabinetry will find this height more practical than trimming a taller standard to fit.
Plywood pilasters can typically be trimmed, but cutting changes the slot spacing relative to the bottom end, which can shift shelf-pin positioning. Where possible, select the size closest to the finished interior height and install without cutting.
This pilaster is part of the X-Series Edge line, so the prefinished surface is intended to coordinate with other components in that series. Confirm the finish against the specific cabinet interior if mixing components from different production runs.
At 20-7/8 inches, this standard is sized for base cabinets and shorter bays, not full-height pantry interiors. A taller pilaster in the X-Series Edge family is the right choice for a pantry run.
This prefinished plywood pilaster delivers the correct height and series fit for base cabinet adjustable shelving, with no finishing step between receiving it and getting it into the cabinet.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CPX-JIG Mfr# X-JIG | X-Series Installation Jig for Bracket System |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CPEDGXPLO21PF-N Mfr# EDGXPLO21PF-N | Century X-Series Plywood 1-1/4" Pilaster Standard, EDGXPLO21PF-N | ||||
Sold in: 1 Each | CPEDGXPLO21PF-W Mfr# EDGXPLO21PF-W | Century X-Series Plywood 2-1/2" Pilaster Standard, EDGXPLO21PF-W | ||||
Sold in: 250 Each | CPEDGXPLO28PF-1 Mfr# EDGXPLO28PF-FL | Century X-Series Plywood 1" Pilaster Standard, EDGXPLO28PF-FL | ||||
Sold in: 250 Each | CPEDGXPLO28PF-N Mfr# EDGXPLO28PF-N | Century X-Series Plywood 1-1/4" Pilaster Standard, EDGXPLO28PF-N | ||||
Sold in: 250 Each | CPEDGXPLO28PF-W Mfr# EDGXPLO28PF-W | Century X-Series Plywood 2-1/2" Pilaster Standard, EDGXPLO28PF-W | ||||
Sold in: 1 Each | CPEDGXPLO59PF-1 Mfr# EDGXPLO59PF-FL | Century X-Series Plywood 1" Pilaster Standard, EDGXPLO59PF-FL | ||||
Sold in: 1 Each | CPEDGXPLO59PF-N Mfr# EDGXPLO59PF-N | Century X-Series Plywood 1-1/4" Pilaster Standard, EDGXPLO59PF-N | ||||
Sold in: 1 Each | CPEDGXPLO59PF-W Mfr# EDGXPLO59PF-W | Century X-Series Plywood 2-1/2" Pilaster Standard, EDGXPLO59PF-W |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set |  CPXBONLY1 Mfr# XBONLY1 | X-Series Pilaster 4-Brackets for 1 Rollout Shelf | ||||
Sold in: 1 Package |  CPXBONLY20 Mfr# XBONLY20 | X-Series Pilaster 80-Brackets for 20 Rollout Shelves | ||||
Sold in: 1 Package |  CPXBONLY200 Mfr# XBONLY200 | X-Series Pilaster 800-Brackets for 200 Rollout Shelves | ||||
Sold in: 1 Package |  CPXBONLY50 Mfr# XBONLY50 | X-Series Pilaster 200-Brackets for 50 Rollout Shelves | ||||
Sold in: 1 Package |  CPXCP1-T-250 Mfr# XCP1-T-250 | X-Series Support Clip for Pilaster |