10" x 3" x 10" Sedona Magnetic Click Corbel, Maple, FB-09056

Sedona Magnetic Click Corbel For Easy Support

Sedona magnetic click corbel is a 10 inch by 3 inch by 10 inch maple corbel that uses embedded magnets to connect to a Magnetic Mounting system, so the corbel snaps into position instead of relying on direct fasteners into the wood. Federal Brace designs this Click Corbel for builders, contractors, and homeowners, which keeps it suitable for both professional millwork projects and serious DIY installations using the same core component. The maple construction is 2.25 inches thick, which gives a substantial wood body for decorative presence and load transfer to the mounting structure. The metal Magnetic Mount System provides 375 pounds of overhang support, so the installed system can handle significant countertop or shelf projections within that rated capacity. Magnetic attachment allows post-installation customization, letting the corbel be removed or repositioned on the magnetic mount without disturbing the structural fasteners behind it.

Key Magnetic Mount Corbel Details For Projects

• The 10 inch by 3 inch by 10 inch maple size provides a balanced profile that supports typical overhang depths while still fitting under many countertops and shelves.
• The 2.25 inch thick maple material gives the corbel a solid wooden body, which supports both decorative shaping and dependable transfer of the rated load to the wall or cabinet frame.
• Embedded magnets provide the "click" connection to the Magnetic Mounting system, which speeds mounting and removal compared to fastening directly through the corbel.
• The metal Magnetic Mount System rated at 375 pounds of overhang support keeps the structural work focused in the mount, while the corbel can be attached or detached magnetically as needed.
• Three 1/4 inch diameter mounting holes in the bracket interface control placement of the three hex lag screws, so the installer can align the attachment points to framing or blocking.

Magnetic Corbel Mounting And Fastener Layout

The Federal Brace Sedona Magnetic Click Corbel works with a Metal Magnetic Mount System, so the main structural support occurs at the mount while the maple corbel attaches magnetically to that base. The bracket portion measures 8 inches by 2 inches by 8 inches, which defines the footprint that seats onto the Magnetic Mounting system and determines the contact area against the supporting surface. A bracket thickness of 0.25 inch keeps the metal interface slim while still providing a defined surface for the embedded magnets to engage. Three 1/4 inch diameter holes in the bracket are sized for the specified three hex lag screws, which gives a direct match between hole size and fastener type during installation. Using three hex lag screws distributes the 375 pound overhang rating across multiple points, supporting load sharing into studs or blocking.

How This Federal Brace Magnetic Corbel Works In Use

Magnetic Click Corbel In Overhang And Trim Locations

This 10 inch by 3 inch by 10 inch Sedona Magnetic Click Corbel in maple fits work where decorative support is combined with structural overhang capacity. The corbel uses the Metal Magnetic Mount System with embedded magnets, so once the mounting bracket is secured with three hex lag screws, the maple body can be positioned by bringing it into contact until it clicks into place. Bracket measurements of 8 inches by 2 inches by 8 inches define how the structural interface sits under a countertop edge, shelf, or similar overhang, giving a clear sense of the supporting footprint. Because the maple material is 2.25 inches thick, the corbel presents as a substantial decorative element while acting as the visible support over the hidden magnetic mount.

Details That Support Repeatable Corbel Installation Results

The Sedona Magnetic Click Corbel uses embedded magnets instead of direct through-fastening into the wood, which removes the step of drilling the corbel for screws and helps maintain the finished face. The magnetic connection to the Metal Magnetic Mount System allows the corbel to be detached after the hex lag screws secure the mount, so finishing or future design changes can be handled without disturbing the structural fasteners. A 0.25 inch thick bracket sets a consistent interface thickness, which helps corbels sit at the same projection and angle when multiple units are aligned along an overhang. The 375 pound carry capacity of the Metal Magnetic Mount System provides a defined rating for overhang support, which lets installers plan bracket spacing and overhang dimensions within that capability. The three 1/4 inch diameter holes and matching three hex lag screws standardize the fastening pattern, giving a predictable layout when repeating the installation across several mounting locations.

Common Questions About This Sedona Magnetic Click Corbel

Select This Corbel For Magnetic Overhang Support

The Sedona magnetic click corbel from Federal Brace combines 2.25 inch thick maple construction with a Metal Magnetic Mount System rated for 375 pounds of overhang support, giving a decorative corbel that attaches magnetically after the structural bracket is lagged into place. For projects that benefit from a 10 inch by 3 inch by 10 inch maple profile, with an 8 inch by 2 inch by 8 inch bracket and three hex lag screw mounting pattern, this corbel offers a defined set of dimensions and a magnetic workflow to support consistent installations.