10" x 3" x 10" Wiltshire Magnetic Click Corbel, Maple, FB-09059

Wiltshire Magnetic Click Corbel For Strong Overhangs

Wiltshire magnetic click corbel gives builders, contractors, and homeowners a decorative maple support that connects using embedded magnets instead of direct fasteners into the corbel body. The 2.25 inch thick maple material provides a solid bracket body for supporting countertop or shelf overhangs where wood appearance matters. Federal Brace's magnetic connection engages with their magnetic mounting system so the corbel "clicks" into place, which keeps the mounting interface repeatable once the base system is secured. The magnetic attachment allows the visible corbel to be removed and reattached after installation, so finishes or layout can be adjusted without disturbing the structural mount. The use of magnets in place of direct drilling into the corbel face protects the decorative profile from extra holes, which helps maintain a clean presentation on exposed installations.

Key Magnetic Corbel Details That Save Time

• The embedded magnets provide the click connection to the magnetic mounting system, so the corbel seats quickly without driving fasteners through the decorative maple, reducing handling time during finish work.
• The use of the Metal Magnetic Mount System provides carry capacity up to 375 lbs of overhang support, so a correctly mounted system can handle substantial countertop or shelf loads in typical project layouts.
• The maple construction with 2.25 inch thick bracket body gives a solid wood mass that works as both a structural support and a decorative element wherever wood corbels are preferred.
• The bracket measurement of 8 inches by 2 inches by 8 inches defines the working support profile, helping plan projection and height in relation to standard countertop depths or shelf dimensions.
• The 0.25 inch bracket thickness at the metal support component creates a slim but defined load path inside the system, which contributes to strength while keeping the mounting hardware discreet.
• The specified carry capacity and magnetic mounting design together support post-installation customization of the visible corbel location, helping coordinate with field conditions around cabinetry or wall finishes.

Magnetic Mounting And Lag Screw Installation Workflow

The Federal Brace magnetic corbel system relies on a Metal Magnetic Mount System to deliver its 375 lb overhang support rating, so the structural work focuses on positioning that mount correctly. The mount uses three 1/4 inch diameter holes to accept three hex lag screws, creating a familiar fastening pattern for installers accustomed to lag-mounted brackets. Once the mount is secured with the lag screws, the embedded magnets in the maple corbel engage the mount by clicking into place, turning the final fit-up into a tool-free step. This separation between structural lag screw work and magnetic corbel attachment streamlines layout, because the heavy fastening happens first and the decorative maple component is positioned afterward.

Where This Magnetic Click Corbel Fits Best

Maple Corbel Use On Overhangs And Walls

This magnetic click corbel, sized at 10 inches by 3 inches by 10 inches with maple construction, is designed as a decorative hardware and molding component in the corbel class. In practice, the 8 inch by 2 inch by 8 inch bracket measurements provide the key working dimensions for supporting overhangs tied to the Metal Magnetic Mount System. The 2.25 inch thick maple bracket body means the corbel presents as a substantial wood element, fitting applications where the support must visually match cabinetry or trim. Because the carrying capacity is defined at 375 lbs of overhang support when used with the Metal Magnetic Mount System, this corbel works in projects where both aesthetics and significant load capacity are required. The magnetic engagement lets the corbel function in spaces that may need removal and reattachment for access while still returning to a consistent position.

Details That Improve Repeatable Corbel Alignment

The embedded magnets in the corbel are engineered to click into place on the magnetic mounting system, giving each attachment a consistent stopping point, which supports uniform reveal and spacing along a run of supports. Three 1/4 inch diameter holes in the mount accept three hex lag screws, which creates a fixed reference once the mount is secured, so every corbel that engages those magnets aligns to that datum. With the bracket thickness at 0.25 inches, the metal component offers a defined interface that controls how the maple corbel seats against the mounting surface, reducing variation caused by uneven fastening. The separation between the lag-screwed Metal Magnetic Mount System and the removable corbel also reduces disturbance to finished maple surfaces during adjustments, so fine-tuning layout relies on magnetic repositioning rather than loosening structural fasteners.

Common Questions About This Magnetic Maple Corbel

Select This Corbel For Magnetic Overhang Support

The Federal Brace FB-09059 Wiltshire magnetic click corbel pairs a 2.25 inch thick maple body with a Metal Magnetic Mount System rated for 375 lbs of overhang support, giving both appearance and strength in one component. Embedded magnets that click into place over the lag-screwed mount separate structural fastening from decorative installation, so adjustment and post-installation customization focus on repositioning the corbel rather than disturbing its base. For projects needing a maple corbel that combines defined bracket measurements with a magnetic mounting workflow, this model offers a clearly specified solution ready to integrate into planned support layouts.