Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 14 inch side-mount ball bearing drawer slide from Fulterer's FR 5000 OT series, rated 100 lb per pair, with over-travel action that carries the drawer past the cabinet face for full access beneath counter overhangs or behind deep face frames. The zinc finish blends into most cabinet interiors and holds up through years of regular indoor use.
A 14 inch slide is a short-run choice: bathroom vanity drawers, small base cabinet drawers, work-surface pull-outs, and compact utility drawers in shop carts or rolling cabinets. In any of those applications, a countertop overhang or a proud face frame can eat into the usable opening. Over-travel pushes the drawer member past the slide's nominal length so the rear of the box clears the obstacle. The entire drawer interior is accessible rather than partially blocked by the cabinet edge. On a 14 inch slide, that extra travel is particularly useful — the drawer is short enough that losing even a couple of inches to an overhang noticeably reduces access to the back.
The FR 5000 OT slides are cold-formed steel throughout, with steel ball bearings running in formed raceways that span the full slide length. The zinc finish is the standard protective coating for side-mount ball bearing slides intended for indoor cabinetry — it resists the humidity and minor contact that comes with everyday kitchen or shop use without requiring maintenance. This is not a stainless or exterior-rated finish; keep these slides in dry, indoor environments.
Cabinet shops and contractors building vanity or bathroom base cabinets with integrated countertops will get the most from this slide's over-travel on a short run. It also works well for shop-built rolling carts, workbench pull-outs, and any compact drawer that sits under a lip or overhang. The standard-motion design — no self-close, soft-close, or detent — keeps the drawer exactly where it is left, which suits work-surface applications where the drawer needs to stay open while both hands are busy. The non-handed format simplifies ordering and installation: one SKU covers every drawer in the run.
Neither. This is a standard-motion slide — the drawer rides on ball bearings and stays wherever it is left. There is no damper and no spring-closing ramp. If you need a damped close in the same Fulterer family, look at the FR 5001 ECD soft-close series.
The FR 5000 OT carries the drawer beyond the slide's nominal 14 inch length. The exact over-travel distance is not stated in the product attributes; confirm with the Fulterer FR 5000 OT specification sheet before building the drawer box if the clearance measurement is critical to your install.
No. The FR 5000 OT is non-handed — both slides in the pair are identical. Order the quantity that matches your drawer count.
The slide requires 1/2 inch of clearance per side between the drawer box and the cabinet interior. Build the drawer box 1 inch narrower than the cabinet opening to leave the correct clearance for each slide.
The slide can be installed in a face-frame cabinet, but the back end of the slide needs support. Use a compatible rear mounting bracket for face-frame applications, sold separately. Brackets are series-specific, so confirm the bracket is designed for the Fulterer FR 5000 line before ordering.
When a 14 inch drawer sits behind a countertop edge and you need the whole box reachable, the FR 5000 OT over-travel slide solves the problem without changing drawer dimensions or cabinet construction. Standard zinc finish, 100 lb capacity per pair, and a non-handed design keep the ordering and installation straightforward.
Sold In: 10 Set
