Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 24 inch side-mount ball bearing drawer slide from Fulterer's FR 5000 OT series, rated 100 lb per pair, with over-travel action that carries the drawer past full extension. The zinc finish puts a clean, functional face on a slide designed for demanding kitchen, shop, and utility drawer installs where the standard travel distance falls just short.
Most kitchen and shop drawers sit beneath an overhang — a countertop edge, a deep face frame, or a rail that juts forward. At full extension, a standard slide brings the drawer face to the cabinet opening and stops. The FR 5000 OT keeps going, pushing the drawer box past that point so the rear contents clear the overhang and become genuinely reachable. This matters most on deep drawers carrying tools, pots, or file folders, where digging past the front row is the daily friction the slide is meant to eliminate. Standard motion means no closing mechanism intervenes — the drawer parks at full open until you push it back, which also makes the FR 5000 OT a practical base for a push-to-open retrofit without a conflicting close spring.
The slide is cold-formed steel throughout, with a zinc electroplate finish. Zinc is the workhorse finish in this product class: it resists the light corrosion that builds up in a busy kitchen or shop environment, it holds up through years of cycling, and it stays neutral against white, grey, or natural wood cabinet interiors. This is not a decorative finish and it is not stainless — it is rated for dry indoor use, not washdown or high-humidity applications.
The 24 inch length suits a cabinet with an interior depth in that range; the slide mounts to the drawer side and cabinet interior with 1/2 inch of clearance required on each side, so the drawer box is built 1 inch narrower than the cabinet opening. Both slides are non-handed — no dedicated left or right part to track. In face-frame cabinets, the back end of the slide needs support from rear mounting brackets, which are sold separately and are series-specific. This slide is sold as a pair; order one pair per drawer.
It travels past the slide's nominal 24 inch length. The exact over-travel distance for the FR 5000 OT is not stated in the available source data — confirm the specific extension distance with Fulterer before sizing for a tight overhang clearance situation.
No. This is a standard-motion slide with no damper, no spring close, and no detent. The drawer stays where it is left. If you need damped closing in the same mount position, look at the Fulterer FR 5001 soft-close series.
No. The FR 5000 OT is non-handed — both slides are identical and either one fits either side of the drawer.
Yes, but the back end of the slide needs support. In face-frame construction, add the matching rear mounting brackets for this series — they are sold separately. Do not skip the rear bracket; the slide's back end will be unsupported without it.
The FR 5000 OT requires 1/2 inch of side clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to fit both slides correctly.
The Fulterer FR 5000 OT in zinc gives you over-travel reach and honest 100 lb capacity in a clean, non-handed format — the practical choice when standard extension leaves the back of the drawer just out of reach.
Sold In: 10 Set
