Riptide drawer side blanks give you pre-sized components for drawer construction so you can focus on machining and assembly instead of ripping and planing stock. These drawer side blanks are part of the drawer construction systems and drawer blanks category, so they are engineered as building blocks for cabinet and furniture drawers where consistent dimensions matter. Each piece is .625 inch thick, which provides a substantial sidewall that supports typical residential and commercial drawer loads while still working with common drawer hardware clearances where a 5/8 inch side is expected. The 4.000 inch height creates a medium-depth drawer profile that suits many base cabinet and furniture layouts, helping maintain a consistent look across a run of cabinetry. The 20.46875 inch length targets drawer boxes around that depth, reducing cutoff waste when laying out standard drawer depths.
These Riptide rubberwood drawer sides use a .625 inch thickness, which matches a 5/8 inch side dimension many installers anticipate when selecting drawer hardware and laying out cabinet openings. The 4.000 inch height sets a predictable wall dimension for dovetail drawer construction, so you can standardize drawer box heights across a project and keep clearances consistent beneath tops and within cabinet frames. With a 20.46875 inch length, each blank starts close to common drawer depths, which simplifies cutting to final dimension when setting up repeat stops on saws or dovetail machines. The UV finished surface gives the drawer sides a completed appearance straight from stock, so once your machining is done, the interiors present a clean look without additional clear-coat steps.
These Riptide drawer side blanks function as drawer side components in drawer construction systems, so they slot directly into workflows where you are building boxes from pre-sized parts rather than milling rough lumber. The drawer side blanks are made of rubberwood, which keeps the species consistent from piece to piece and supports a unified appearance when drawers are opened side by side in a kitchen or commercial installation. Their 4.000 inch height fits many base cabinet drawers that do not require tall storage but still need practical depth for utensils, tools, or general contents. Because each piece is UV finished rubberwood, the interior surfaces already present a clear, even coating, so assembled drawers look finished immediately after construction once joints are machined and assembled. The classification as drawer side blanks within drawer construction systems means they are designed specifically for this role rather than as generic boards.
The .625 inch thickness on every Riptide drawer side blank gives you a standard 5/8 inch profile that supports consistent setup on dovetail jigs and drawer machinery, since bit depth and fence positions can remain fixed across a run. The 20.46875 inch length provides a repeatable starting dimension, which helps when setting stops on crosscut or dovetail equipment for efficient batch production. With a 4.000 inch height, the drawer sides maintain a uniform wall dimension that simplifies layout of drawer fronts and allows predictable clearances under countertops and within cabinet frames. The UV finished rubberwood surface means the sides arrive with a ready-to-use finish, so after machining dovetail joints and assembling the box, the interior surfaces already have a clean, sealed appearance. The pallet quantity of 944 drawer side blanks supports extended production runs where keeping dimensions and species constant reduces setup changes and helps maintain consistent results from the first drawer to the last.
Each Riptide drawer side blank is .625 inch thick, 4.000 inches high, and 20.46875 inches long, so it serves as a pre-sized component for building medium-depth drawer boxes.
These drawer side blanks are made of rubberwood, giving you a uniform species across parts for consistent machining and a coordinated look when drawers are opened together.
The .625 inch, or 5/8 inch, thickness provides a substantial sidewall while aligning with many drawer hardware expectations, which supports predictable clearances and sturdy drawer box construction.
The UV finished rubberwood surface gives the drawer sides a ready-to-use clear finish, so after your joinery work the interior appears clean and finished without extra clear-coat steps.
These Riptide drawer side blanks are designed for drawer construction systems as drawer side components, supporting cabinet and furniture drawer builds where consistent dimensions are required.
The 4.000 inch height creates a medium-depth drawer side that fits many cabinet layouts, helping you standardize box heights across a project for a consistent finished appearance.
Riptide drawer side blanks in rubberwood give you .625 inch thick, 4.000 inch high, 20.46875 inch long components ready for dovetail and drawer box construction. The UV finished surface lets completed drawers present a clean interior without additional clear finishing steps on the sides. With a pallet quantity of 944 pieces, these drawer side blanks support production environments that rely on repeatable dimensions and species consistency across many drawers. For projects built around drawer construction systems and drawer blanks, this Riptide option offers a defined size and finish that align with medium-depth drawer applications.
Sold In: 944 Each