Riptide drawer sides 5.125 x 48 describe rubberwood drawer side blanks designed for building dovetail drawers where a consistent side height is needed across a run of cabinets. The 5.125 inch height sets a repeatable reference for drawer depth, which helps keep layouts uniform on multi-drawer bases. The 48.000 inch length gives enough material to cut multiple sides from each blank, which supports efficient yield planning on the bench. The .625 inch thickness defines the side profile, so joinery, groove locations, and slide clearances can all be set up around a known dimension. Being part of a drawer construction system as drawer side blanks keeps these parts focused on that specific role instead of general lumber use. The rubberwood material gives a uniform substrate, so machining dovetails and grooves can follow the same settings from piece to piece.
The drawer side blanks at .625 inch thickness define how they fit into a drawer construction workflow, because that measurement drives groove sizing for drawer bottoms and alignment with drawer fronts. Their 5.125 inch height gives a known clearance window inside typical cabinet openings, guiding how tall fronts and backs can be laid out. With each blank at 48.000 inches long, cutting plans can be organized around common drawer widths so offcuts are minimized. The dovetail designation ties these sides to dovetail assembly steps, allowing dovetail machines or jigs to be calibrated once and run across the batch. The UV finished rubberwood surface also affects workflow by reducing the amount of finishing work on interior drawer faces, keeping more of the build time on cutting, joinery, and assembly.
These Riptide drawer side blanks are categorized under drawer construction systems and drawer blanks, placing them directly in cabinet and furniture drawer building applications. The dovetail drawer side description ties them specifically to dovetail-style drawer boxes rather than other joinery patterns, so they are used where dovetail joints form the corners. Their 5.125 inch height is suited to drawers that need a moderate side height, such as kitchen, bath, or casework drawers that balance storage depth with opening clearances. The 48.000 inch length allows them to serve both wider base cabinet drawers and narrower upper or furniture drawers from the same stock. With rubberwood as the stated material, these sides are used where a wood drawer interior is desired as part of the overall cabinet system.
The .625 inch thickness impacts joinery and hardware layout because many drawer bottom grooves and clearances are based on that side thickness, which reduces rework when settings match the material. The 5.125 inch height matters when aligning drawer fronts and slides, since consistent side height keeps reveal lines and hardware positions predictable across a bank of drawers. The 48.000 inch length plays into yield and cost per drawer, as cutting multiple usable lengths from each blank limits waste during breakdown. Having a UV finished rubberwood clear surface changes sanding and finishing steps, since the interior faces start with a finished surface that is ready to function inside a cabinet. The pallet quantity of 354 pieces supports jobs where many drawers share the same construction details, giving shops enough identical sides to standardize setups and maintain repeatable quality across large runs.
These Riptide parts are drawer side blanks in a drawer construction system, so they serve specifically as the side components of a built drawer box.
The drawer side blanks are .625 inch thick, 5.125 inch in height, and 48.000 inch in length, which defines how they are cut and fitted into drawer assemblies.
The dovetail drawer side designation means these blanks are intended for dovetail drawer joints, aligning their dimensions and role with dovetail corner construction.
The drawer sides are made of rubberwood, providing a consistent wood substrate that machines predictably during cutting and joinery.
The UV finished rubberwood surface gives the sides a prefinished interior face, which reduces finishing steps and keeps attention on machining and assembly.
The pallet quantity of 354 pieces supports higher-volume drawer production, giving shops enough identical parts to standardize setups across multiple projects.
The Riptide DRWE_D_5.1250X48.0000 drawer side blanks combine dovetail-specific design, .625 inch thickness, and 5.125 inch height to anchor drawer box dimensions around fixed, repeatable measurements. Their 48.000 inch length and rubberwood UV finished construction support efficient cutting, machining, and assembly in drawer construction systems where consistent results across many drawers are important. For operations planning a run of wood drawers with dovetail joints, these pallet-quantity drawer side blanks provide a standardized starting point for layout and production.
Sold In: 354 Each