Riptide drawer side blanks give you a dedicated component for building drawers using a dovetail-style layout. Each piece is identified as a drawer side blank, so it is sized and purposed to serve as the vertical wall of a drawer box in a drawer construction system.
The rubberwood material keeps the drawer sides within a predictable hardwood family, which supports consistent machining from one job to the next. The blanks are referenced at 7.87 inches by 48 inches in the descriptive data, and this orientation defines their usable height and length in a standard drawer layout.
The product name specifies a .625 inch thickness together with a 7.875 inch height and 48.000 inch length, so you can align these dimensions with your drawer design and casework openings. The UV finished description indicates the rubberwood surface is factory-coated, which provides a ready-to-use outer face that does not need additional finishing steps within normal drawer side use.
The product name details a .625 inch thick drawer side, which defines how far each side projects into the interior of the cabinet opening and influences slide clearances and overall drawer width calculations. The 7.875 inch height figure gives you a reliable starting point for drawer box side height, tying directly into how much storage depth is available inside the drawer while still staying within your face frame or frameless cabinet design.
The 48.000 inch length listed in the product name and the 7.87x48 figures in the SAP description both describe long stock that can be broken down into individual sides. This length lets you plan multiple shorter drawer sides out of each piece, organizing your cutlist around standard cabinet widths. Because the SAP description references drawer side dovetail, these blanks are suited to a workflow where you run dovetail joints along the ends, keeping joint layout consistent from piece to piece.
The category designation of drawer construction systems and drawer blanks places this product directly in shop-built drawer box work. As drawer side blanks, each 7.875 inch tall, .625 inch thick piece serves as a side wall in a drawer assembly, aligning with typical cabinet drawer proportions.
The 48.000 inch length gives you enough stock to pull several sides for smaller drawers or a pair of longer sides for wide drawers, so the same part number can cover multiple cabinet widths. The rubberwood clear description indicates a consistent species and appearance, which supports projects where you want drawer interiors that match across a full kitchen or bank of casework.
The SAP description identifying the part as drawer side dovetail at 7.87x48 connects these blanks to a dovetail-oriented construction method. In practice, that means the ends of each blank can be machined for dovetail joints without having to reshape the whole profile, streamlining repeat runs of drawer boxes built on the same system.
The stated .625 inch thickness in the product name lets you base all your drawer width and hardware clearances on a fixed side-wall dimension, which simplifies layout for runs of matching cabinetry. With a known thickness, side-to-side measurements stay consistent when you move from design to cutting and assembly.
The 7.875 inch height and 7.87 inch reference in the SAP line both describe the working height zone for the drawer sides. This gives you confidence that the side panels will present a reliably tall profile once cut to length, helping you align drawer fronts, backs, and internal dividers around a single standard height.
The 48.000 inch length provides a straightforward planning dimension for optimizing yield on the saw. You can map your required drawer side lengths against the 48 inch stock to minimize offcuts and keep parts for a project grouped under one part number. Because the material is rubberwood and described as UV finished, the surface arrives pre-coated, so your machining sequence can focus on joinery and sizing without a separate step to apply a basic finish to the faces of the drawer sides.
The Riptide drawer side blanks are identified with a .625 inch thickness, a 7.875 inch height, and a 48.000 inch length, so drawer layouts and cutlists can be based on those measurements.
The Riptide drawer sides are made of rubberwood as stated in the web description, providing a consistent wood substrate and appearance across all drawer side blanks in a project.
The UV finished note on the rubberwood drawer sides means the faces arrive factory-coated, allowing drawer assemblies to use those coated surfaces without a separate finishing operation on those faces.
The SAP description lists drawer side dovetail 7.87x48, so the blanks are sized for machining dovetail joints at the ends, aligning with dovetail-style drawer box construction.
The .625 inch thickness stated in the product name sets a fixed side-wall dimension, which helps determine overall drawer box width and related clearances in cabinet openings.
The 48.000 inch length noted in the product name provides a long blank that can be cut into multiple drawer sides, aiding yield calculations and part planning for different drawer widths.
Riptide drawer side blanks give you a defined .625 inch thick, 7.875 inch high, 48.000 inch long component for drawer box construction. With rubberwood material, a UV finished surface, and a drawer side dovetail 7.87x48 designation, these blanks support consistent machining and sizing across full runs of drawers in a drawer construction system. For projects built around standard drawer proportions and dovetail-style joints, this single part number aligns dimensions, material, and surface treatment around a repeatable shop workflow.
Sold In: 236 Each