Riptide drawer sides are drawer side blanks designed for building dovetail drawers in production or shop environments. The sides have a 0.625 inch thickness, so they provide a consistent material profile for machining and assembly across a full run of drawers. The 5.125 inch height gives a fixed side dimension that helps maintain uniform drawer box proportions from cabinet to cabinet. The 11.125 inch length works where a shorter drawer depth is specified, supporting layouts that mix different drawer sizes in the same project. Each side is made of rubberwood, giving you a stable wood species that accepts machining for dovetail joinery. The rubberwood is UV finished, so the drawer sides arrive with a clear finish already applied on the material surface, saving a finishing step in the workflow. The product is sold in pallet quantities only, aligning with higher-volume drawer production.
The drawer side blanks have a 0.625 inch thickness, which lets you dial in your machining and stay on that setting for the entire pallet without chasing irregular stock. With a 5.125 inch height, the sides create a medium-height drawer that works in many base cabinet and general storage layouts, which simplifies planning across multiple cabinet lines. The 11.125 inch length gives you a fixed blank size suited to shallower drawers, helping standardize cutting or machining patterns where that depth is required. Each side is made from rubberwood, so tooling can be selected around a consistent wood substrate rather than mixed materials. The UV finished clear surface on the rubberwood drawer sides means the visible wood face already has a clear finish layer, which streamlines drawer box preparation before installation into cabinets.
These Riptide drawer side blanks are part of a drawer construction system, so they are intended for building drawer boxes within cabinet and woodworking projects that use dovetail joinery. The 0.625 inch thick sides work well in installations where a solid, moderate-thickness drawer side is standard, helping match the proportions of many residential or commercial cabinet lines. With a 5.125 inch height, the drawer sides fit situations where a medium-height drawer is needed, such as general storage drawers in base cabinets or casework. The 11.125 inch length supports applications that call for shorter drawers, such as upper cabinetry, smaller bath vanities, or storage units with limited depth. Because the sides are made of rubberwood and UV finished clear, they are suited for interior drawer applications where a clear-finished wood look is desired without an additional clear coat step on the side material.
The defined 0.625 inch thickness means machines can be set once and run through pallet quantities, helping maintain dovetail fit from the front of the batch to the last drawer. The 5.125 inch height controls drawer side exposure and interior space, supporting consistent ergonomics and visual lines across multiple cabinets. At 11.125 inches long, the drawer sides lend themselves to standardized cutting or joint spacing patterns for shorter-depth drawers, which reduces layout variation during machining. Rubberwood construction supplies a single wood species for the drawer sides, aiding predictability in cutting, routing, and sanding. The UV finished clear surface on the rubberwood drawer sides arrives with a factory-applied clear finish layer, so the sides present a ready-finished wood appearance that avoids a separate clear finishing pass on that component. Because the product is sold in pallet quantities only, it supports continuous production where the same drawer side specification can run through larger jobs without material changes.
Riptide drawer sides are drawer side blanks within drawer construction systems, so they serve as the solid wood sides for building dovetail drawer boxes.
Each drawer side blank is 0.625 inch thick, 5.125 inches high, and 11.125 inches long, giving a controlled material size for planning dovetail drawer layouts.
The drawer side blanks are made of rubberwood, which provides a consistent wood substrate for machining and assembling dovetail drawer boxes.
The UV finished clear surface means the rubberwood drawer sides arrive with a clear finish already applied, reducing or eliminating a separate clear finishing step.
The drawer side blanks are described as dovetail drawer sides, so they are intended for use in drawer boxes assembled with dovetail joints.
The Riptide drawer sides are sold in pallet quantities only, which aligns with higher-volume drawer production and larger cabinet projects.
Choose these Riptide drawer side blanks when a 0.625 inch thick, 5.125 inch high, 11.125 inch long side fits your drawer layout and you need rubberwood with a UV finished clear surface. The defined dimensions simplify setting up dovetail machining across runs, while the rubberwood construction and clear UV finish support an efficient interior drawer appearance. With pallet-quantity sales, this part number suits operations planning multiple cabinets or projects around a single, repeatable drawer side specification.
Sold In: 1416 Each