Pro Value Series TA L589 Salt Of The Earth edgebanding is a PVC edge banding in a 15/16 inch width and 1mm thickness, so it covers standard panel edges while adding a defined edge profile. The Pro Value Series brand identity ties this product to a focused line of edge banding solutions, so it can be selected confidently when matching within that series. The TA L589 Salt Of The Earth identification in the description points to a specific color or design reference, which helps maintain visual consistency across multiple panels in the same project. Being part of an Edgebanding, PVC category places this material in a familiar class for cabinet and furniture work, so it can slot into existing shop workflows alongside other PVC surfacing materials.
The stated 15/16 inch width gives extra coverage beyond standard board thickness, so the banding can be aligned slightly proud and then trimmed back for a tight, chip-free edge. The 1mm thickness sits in a practical middle range, so it offers more substance than ultra-thin tape while still machining smoothly on typical edgebanders or trimmers. Because this product is categorized as Edgebanding & Surfacing under PVC, it fits into established settings where operators already work with PVC edges, so setup and handling are familiar from job to job.
This product is classified as Pro Value Series edge banding in the Edgebanding & Surfacing category, so it suits cabinet, furniture, and general panel-based construction where a finished edge is required. The TA L589 Salt Of The Earth naming appears in both the web and SAP descriptions, so it acts as a consistent identifier when matching color or design across cabinet fronts, shelves, and exposed panel edges. Because the material is defined as PVC edge banding, it naturally aligns with projects that already utilize PVC laminate or similar surfacing, so designers and builders can keep a coordinated appearance through visible and semi-visible edges.
The Pro-Tek Edgebanding Ulc TN15/16X1MM-L589 description links the product to a recognizable trade designation, so shop managers, estimators, and installers can all reference the same label when specifying material for runs or reorders. The edge banding format supports use on straight cabinet sides, shelving edges, and casework components, so one material can cover multiple parts of a job while maintaining the TA L589 Salt Of The Earth look. With the width and thickness clearly defined, planners can anticipate trim passes, tooling paths, and edge profiles before the run, which supports smoother throughput and fewer surprises on finished pieces.
The combination of 15/16 inch width and 1mm thickness helps standardize setup across similar jobs, so once a machine is dialed in for this PVC edge banding, operators can maintain the same settings for consistent results. The extra width over typical core thickness provides trimming allowance, so even slight panel size variations still leave enough material to flush-cut without exposing the substrate. The 1mm thickness gives the edge some presence compared to very thin options, so routed corners and transitions look intentional while still blending with adjacent surfaces.
Because the product is firmly identified as PVC in both the category and description, its machining characteristics align with known PVC edge banding behavior, so tooling selection and feed expectations are easier to predict. The matching of names across Pro Value Series, TA L589 Salt Of The Earth, and Pro-Tek Edgebanding Ulc TN15/16X1MM-L589 means purchasing documents, cutlists, and labels all refer back to the same material, which reduces confusion when repeating a successful setup on later batches. The defined manufacturer part number WUX11847-5 15/16X1MM further anchors this consistency, so reordering the identical 1mm edge banding for follow-up work remains straightforward.
This TA L589 Salt Of The Earth strip is PVC edge banding, so it works alongside other PVC surfacing materials commonly used in cabinet and panel fabrication.
The Pro Value Series TA L589 Salt Of The Earth edgebanding has a width of 15/16 inch, so it overhangs typical panels slightly for trimming to a flush finished edge.
This Pro-Tek edgebanding ULC TN15/16X1MM-L589 is 1mm thick, so it provides a solid edge profile that still machines smoothly on standard edgebanding equipment.
The TA L589 Salt Of The Earth designation identifies a specific appearance within the Pro Value Series, so matching edges across multiple panels stays consistent.
The WUX11847-5 15/16X1MM part number specifies this exact 15/16 inch by 1mm PVC edge banding, so purchasing and shop staff can reference the same product.
This PVC edge banding is listed under Edgebanding & Surfacing, Edgebanding, PVC, so it aligns with cabinet, furniture, and panel surfacing workflows.
The Pro Value Series TA L589 Salt Of The Earth 15/16 inch by 1mm PVC edge banding delivers a defined width and thickness, so cabinet and panel projects can be planned around stable, repeatable edge details. With matching identifiers across the web description, SAP description, and Pro-Tek Edgebanding Ulc TN15/16X1MM-L589 naming, this product ties ordering and shop use to the same clearly defined material. For projects specifying Pro Value Series edge treatment in the TA L589 Salt Of The Earth look, this edge banding provides the documented dimensions needed to keep runs, repeats, and future phases visually aligned.
Sold In: 300 Lineal Ft