21" x 21" Heavy Duty Workstation Bracket, Almond Finish

21 x 21 Heavy Duty Workstation Bracket Use

21 x 21 heavy duty workstation bracket defines this Pro Value Series support as a 21 inch by 21 inch steel bracket designed for workbenches, workstations, and similar surfaces, so it carries substantial loads while keeping layouts consistent across a run. The 1,000 lb per pair load rating ties the bracket directly to heavy-duty duty applications, so a properly supported span can hold tools, materials, and equipment without relying on lighter shelf hardware. The bracket is made from 1/8 inch steel, so its material thickness gives rigidity that resists flex in everyday bench and countertop use. This Pro Value Series bracket sits in the Workstation and Countertop Brackets class, so it is intended as a primary structural support rather than a light trim piece. The almond finish provides a neutral color option within the four available colors, so the bracket can match or blend with surrounding cabinetry and wall finishes in finished shops or garages.

Workstation Bracket Details That Support Projects

• The 1,000 lb per pair load rating establishes the bracket for demanding workbench, workstation, and garage storage installations, so installers can plan spans and support locations around a known structural performance figure.
• The 1/8 inch steel construction provides a solid, single-piece support arm, so countertops and work surfaces stay stable under typical workshop forces such as impacts, tool placement, and material handling.
• The almond finish is one of four color options listed alongside black, white, and gray, so this specific version fits projects where a light, warm tone aligns with cabinets, wall systems, or ADA station design schemes.
• The Pro Value Series brand and Workstation and Countertop Brackets product class position this part as a work-focused support, so it can be specified consistently anywhere a structural bracket is required across workbenches and computer stations.
• The manufacturer part number 2/PK 72531 77 166 identifies this exact 21 x 21 almond bracket pair, so buyers can match future orders or documentation to the same component across multiple jobs.

Workstation Bracket Mounting And Hole Layout

The multiple mounting 1/4 inch hole locations provide several fastening points along the bracket, so installers can land fasteners into studs, blocking, or substrate areas that best support the 1,000 lb per pair rating. Because the holes are pre-sized for 1/4 inch fasteners, layout time is reduced and mounting patterns stay consistent from bracket to bracket across a longer bench run. The reversible design means the same bracket shape can be oriented either way during installation, so it adapts to different wall conditions, clearances, or station layouts without requiring separate left-hand and right-hand part numbers. This reversible utility helps maintain alignment when transitioning between workbenches, garage storage bays, and ADA or computer stations within the same project.

How This 21 x 21 Bracket Fits Real Workstations

Workstation And Storage Applications For This Bracket

This 21 x 21 heavy duty workstation bracket is specified for use in workbenches, workstations, garage storage, ADA stations, computer stations, and similar setups, so it covers a broad set of installation types from shops to offices. In a workbench or workstation, the 1,000 lb per pair load rating connects directly to supporting benchtops, tools, and supplies without separate structural frames. In garage storage layouts, the bracket supports deeper shelves or countertop-style surfaces, so larger containers and equipment can sit securely. At ADA stations, the bracket provides underside support while keeping the area visually clean, which helps align with accessible design layouts. In computer stations, the same bracket class supports work surfaces that carry monitors and equipment, so planners can standardize on one 21 x 21 component across these environments.

Design Details That Support Repeatable Results

The reversible design makes the brackets versatile and easy to use, so installers can flip orientation during layout without sorting lefts and rights beyond the equal quantities noted in the pair. That reversible geometry simplifies planning and helps keep mounting patterns consistent across a row of stations. Multiple mounting 1/4 inch hole locations along the bracket give several fastening points into structure, so wall cleats, studs, or blocking can be used where they occur instead of forcing one fixed pattern. The six larger sizes in this bracket line have a 3 inch x 3 inch - 45 degree notch that allows wall cleat and wire run clearance, so on those larger models electrical or data routes can pass behind or through the support zone without cutting into the bracket. The 21 x 21 size sits within that larger-size group, so it benefits from this 3 inch x 3 inch - 45 degree notch when routing cleats or wiring in workstation and garage storage layouts.

Common Questions About This Workstation Bracket

Selecting This Bracket For Your Next Station

This 21 x 21 heavy duty workstation bracket from the Pro Value Series combines a 1,000 lb per pair load rating with 1/8 inch steel construction, so it is suited to workbenches, workstations, garage storage, ADA stations, and computer stations requiring structural support. The almond finish and workstation-focused design place it within Workstation and Countertop Brackets, so planners can match both appearance and performance across a project. For projects that call for a consistent 21 inch by 21 inch support with multiple mounting 1/4 inch hole locations and a reversible layout, this 2/PK 72531 77 166 bracket pair offers a defined, repeatable solution.