Salice Series F Self-Close Full Overlay Face-Frame;Frameless Thick Door Hinge Nickel, 94° Screw-On - CFA7A99

Salice Series F Hinges For Thick Overlay Doors

Salice Series F hinges are designed for profile and thicker doors, so they handle applications where standard concealed hinges run out of adjustment room. This matters when you are hanging overlay doors on face-frame or frameless cabinets and need dependable geometry. These Salice Series F hinges are described as the perfect solution for overlay pocket doors, which helps when doors must clear openings while still covering the frame. The hinge can be used for doors up to 40 mm thick, allowing you to work with thicker materials or profiled doors without changing your construction approach. A 94 degree opening angle controls how far the door swings, which supports layouts where wider opening is not required. The hinge is nickel finished, giving a neutral, professional look inside the cabinet that blends with other nickel hinge hardware.

Key Salice Thick Door Hinge Details For Pros

• The Salice Series F designation identifies this hinge line for profile and thicker doors, helping you match it with existing Salice projects and planning future jobs consistently.
• Its use on doors up to 40 mm thick supports builds with heavier or decorative doors, so you can keep a concealed hinge layout while stepping up to thicker stock.
• The hinge offers large overlays up to 1 3/8 inch, letting you cover more of the face-frame or case edge, which is useful when aligning with surrounding doors and trim.
• A 94 degree opening range sets a controlled swing, keeping doors from projecting excessively into walkways or adjacent cabinetry during everyday use.
• The self-close function pulls the door shut at the end of travel, which is helpful for consistent closure and keeping fronts aligned without extra user effort.

Installation Geometry And Mounting Workflow

This Salice thick door hinge has a cup depth of only 13 mm, so you remove less material from the door while still gaining a full concealed hinge seat. The hinge cup edge drilling distance ranges from 3 mm to 15 mm, giving flexibility in boring location to match different overlays and door constructions. A screw-on design fastens the hinge to the door and plate with screws rather than press-in methods, which suits installers who prefer mechanical fastening into wood. The hinge uses a patented parallel side-to-side adjustment of plus 5.5 mm to minus 0.5 mm via the hinge arm screw, so you can shift the door horizontally without changing the cup positioning, helping speed onsite adjustments.

Salice Series F Hinge Use In Cabinet Projects

Where This 94 Degree Full Overlay Hinge Fits

This Salice Series F self close hinge is described for profile and thicker doors, so it aligns with cabinets built from thicker panels or doors with raised profiles that reduce standard hinge clearance. Its ability to work with doors up to 40 mm thick supports installations on heavy fronts and certain pocket door applications. Large overlays up to 1 3/8 inch mean you can cover more of the face-frame or case edge, which is valuable when aiming for tight reveals and minimal visible frame. Being suitable for overlay pocket doors lets you use the same hinge family in pocket and standard overlay layouts, simplifying parts selection across a job. The concealed long arm European design keeps hardware hidden when the door is closed, supporting a clean cabinet appearance in kitchens, baths, and commercial casework.

Adjustment, Plates, And Consistent Results

The patented parallel side-to-side adjustment of plus 5.5 mm to minus 0.5 mm via the hinge arm screw lets you fine-tune reveals without reboring, which helps reduce rework on installed doors. Because Series F hinges are designed to work with all Salice mounting plates, you can pair this hinge body with different plate heights to hit your overlay targets while staying in one system. The hinge is compatible with Smove soft-close devices, allowing you to add soft-close control on compatible setups while keeping the same hinge line. Exceeding ANSI/BHMA grade 2 standards indicates performance that aligns with demanding cabinet environments, and ISO 9001 and ISO 14001 certifications reflect controlled manufacturing and environmental management, supporting repeatable quality. As a concealed cabinet hinge in the European thick door hinge category, it integrates into long-arm concealed layouts that many installers already use.

Common Questions About This Salice Series F Hinge

Select This Salice Thick Door Hinge For Demanding Jobs

The Salice Series F self-close full overlay hinge with 94 degree opening, 13 mm cup depth, and door capacity up to 40 mm gives you a concealed option for thicker or profiled doors. Large overlay capability up to 1 3/8 inch and parallel side-to-side adjustment via the hinge arm screw support clean reveals and streamlined installations. Compatibility with all Salice mounting plates and Smove soft-close devices lets you standardize on one hinge family across varied cabinet layouts. For projects calling for a concealed cabinet hinge that exceeds ANSI/BHMA grade 2 standards and carries ISO 9001 and ISO 14001 certifications, this Salice Series F hinge offers a coordinated solution.