Salice Series F Self-Close Inset Overlay Face-Frame;Frameless Thick Door Hinge Nickel, 94° Screw-On - CFA7P99

Salice Series F Self-Close Hinge For Thick Doors

Salice Series F self-close hinge is a concealed cabinet hinge designed for inset overlay face-frame and frameless thick door applications, so it lets you keep hardware out of sight while handling demanding cabinet door builds. This hinge belongs to the European concealed long arm, European thick door hinge class, so it suits higher-end casework where hidden hardware and door thickness must work together. The 94 degree opening angle allows the door to swing open for comfortable access without overextending into surrounding cabinetry. A self-close function pulls the door shut at the end of travel, which helps doors sit consistently closed in everyday use. The hinge has a nickel finish, so it presents a clean, uniform look inside the cabinet run. As a concealed cabinet hinge, it mounts inside the cabinet, supporting a streamlined exterior while still allowing precise door positioning.

Key Salice Hinge Details That Support Your Build

• The hinge is specified for inset overlay face-frame and frameless thick doors, so it covers both traditional face-frame layouts and modern frameless boxes using thicker doors in one hinge family.
• Being part of the European concealed long arm hinge category, it offers the reach and articulation needed to position thicker doors while keeping the arm hidden from the exterior side of the cabinet.
• The 94 degree opening angle balances access and control, so doors open wide enough for daily use but stay within a predictable swing path around adjacent cabinets or walls.
• The nickel finish provides a neutral, professional appearance, so hinge hardware visually aligns with other common cabinet components inside residential or commercial installations.
• As a concealed cabinet hinge, it keeps the hinge mechanism on the interior, so exterior door and face-frame lines remain uninterrupted across the project.

Mounting And Cup Details For Salice CFA7P99

The Salice CFA7P99 hinge uses a screw-on mounting style, so the hinge fastens directly to the door and cabinet structure using screws for a secure mechanical connection. This hinge is intended for profile and thicker doors, which means its geometry is shaped to clear raised profiles and extra door thickness while maintaining the intended inset position. A 12 mm deep cup is specified for the hinge, so the door needs a matching 12 mm deep bore to seat the cup flush and support a stable pivot point. The hinge supports a maximum door thickness of 40 mm, which defines the upper range of door builds it is engineered to carry while maintaining proper motion and closing.

Using The CNA7P99 Hinge In Cabinet Work

Where This Concealed Hinge Fits Best

The CNA7P99 hinge is part of the Salice Series N line for profile and thicker doors, so it is suited to doors with raised designs or extra thickness that might not work with standard cup hinges. Its maximum 40 mm door thickness capability allows use on substantial doors, so heavy or deep-profile fronts can still be hinged with a concealed solution. The inset overlay face-frame fit means the door edge sits flush within the frame opening, so this hinge supports cabinetry where doors are recessed rather than overlaying the frame. On frameless thick door cabinets, the same hinge geometry supports concealed mounting, so modern box construction can also use thicker fronts without exposing the hinge. The hinge belongs to the concealed cabinet hinge product class, so it is appropriate wherever the design goal is clean exterior faces and a consistent interior hardware layout.

Details That Support Repeatable Results

This hinge uses a 12 mm deep cup, so repeating the same bore depth across doors helps keep the pivot position uniform from door to door in larger runs. The specified possible drilling distance on the door (K) from 3 to 14 mm allows the cup hole to be positioned within that range, so cabinet makers can set overlay relationships or fine-tune the door reveal while staying within the hinge design window. Compatibility with all traditional Series 200 mounting plates means existing runs using those plates can receive this hinge without changing the plate interface, so upgrades or changes stay within a known mounting system. The hinge is also compatible with all Domi snap-on mounting plates, so door removal and reattachment can follow established Domi snap-on workflows where those plates are already part of the cabinet line. The 94 degree opening characteristic remains consistent across these mounting options, so movement and clearances stay predictable even when plate styles vary within Series 200 or Domi systems.

Common Questions About Salice CFA7P99 Hinge Use

Selecting This Hinge For Thick Door Projects

The Salice Series F self-close hinge ties together inset overlay face-frame capability, frameless thick door suitability, and a 94 degree opening angle, so it addresses projects needing concealed hardware on substantial doors. Its 12 mm deep cup, maximum 40 mm door thickness rating, and K drilling distance from 3 to 14 mm define a clear working window for cup boring and layout. Compatibility with Series 200 and Domi snap-on mounting plates means this CNA7P99 hinge fits into established Salice plate systems, so integrating it on new or existing cabinet runs follows a known pattern.