Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Silentia concealed hinge is built for thick-door applications, hanging half overlay doors on face-frame or frameless cabinets with a damped, quiet close and a screw-on mount in a Titanium finish.
Standard concealed hinges are engineered for doors roughly 16 to 22mm thick, and their 35mm cup will not seat properly in thicker stock. This hinge moves to a 40mm cup sized for thicker door panels, so the bore seats fully and the arm geometry closes right. The 94 degree opening is not a restriction to work around: it is the swing that allows a thick door to clear the cabinet face without the leading edge catching. A wider angle here would let the door collide, so 94 degrees is the correct spec for this application. The hinge bores into the door and the arm mounts to a Salice base plate on the cabinet, ordered separately, matched to your cabinet construction and overlay.
The steel construction carries a Titanium finish, a warm metallic tone that sits between brushed nickel and champagne bronze and works well in kitchens and baths with mixed-metal or transitional hardware schemes. Silentia soft-close is the damping technology built into this hinge: it slows the door over the last few degrees of travel so the close is quiet and controlled every time, which matters on thick, heavier-weight doors that carry more momentum into the cabinet face. The screw-on mount connects directly to the stile or panel surface, a straightforward fastening that does not depend on pre-drilled system holes in the cabinet.
Cabinet shops building custom or semi-custom work with thicker face-frame fronts, furniture makers working in solid hardwood door panels, and designers specifying a Titanium finish across a run of hardware will all find a fit here. It works on both face-frame and frameless cabinets, so it carries into either construction method without a change of hinge family. The half overlay setup applies wherever two doors meet on a shared partition, covering roughly half the panel on each side. For doors in the standard 16 to 22mm thickness range, the standard Salice concealed hinge line is the right choice instead of this thick-door series.
The 94 degree swing is intentional for thick-door applications. A thick door needs a tighter opening arc to clear the cabinet face without the door edge making contact. It is the correct geometry for this product, not a shortcoming.
Yes. This hinge connects to a Salice base plate that mounts to the cabinet, sold separately. Plates are specific to the Salice system, so use a Salice plate matched to your cabinet type and the overlay you need.
Silentia is Salice's integrated soft-close damper. It slows the door over the final degrees of closing so it settles quietly. Self-close is a different mechanism: a spring that pulls the door shut but does not cushion it. This hinge damps the close; it does not just pull the door in.
Yes. It is rated for both face-frame and frameless cabinets. Pair it with the appropriate Salice plate for your cabinet construction.
When the door stock is too thick for a standard cup and the finish spec calls for Titanium, this Salice Silentia hinge delivers the geometry, damping, and look the job requires.
Sold In: 1 Each
