Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Silentia hinge brings soft-close performance to half overlay doors on thick-door frameless and face-frame cabinets, in a polished Nickel finish that coordinates with brushed and satin metal hardware throughout the space.
Thick cabinet doors need a hinge engineered for the extra mass and depth, and that is what this Salice hinge is sized for. The 40mm cup bores into the back of the door, replacing the standard 35mm cup that would not seat correctly in thicker stock. The 52mm boring pattern spaces the mounting holes to match the door's geometry. The 94 degree opening angle is the correct engineering for a thick door: it limits the swing to the arc where the door clears the cabinet face cleanly rather than catching on it.
The half crank arm sets the door at a partial overlay, covering part of the cabinet side rather than the full face. This is the geometry for two doors sharing one center partition, where a full overlay arm would create a collision between the two. A matching Salice base plate, ordered separately, connects the hinge arm to the cabinet. Plates are Salice-specific and are not interchangeable with other brands.
The hinge body is steel with a Nickel finish. Nickel coordinates naturally with brushed pulls, knobs, and other exposed hardware across a kitchen or bath, so the hinge blends into the visible hardware palette when the door is open. Silentia soft-close is integrated into the hinge, so there is no separate damper to source or install, and the mechanism handles the door consistently across daily use.
This is the right hinge for cabinet shops and contractors building or retrofitting thick-door cabinetry where two doors share a center partition and the finish needs to coordinate with Nickel hardware. It suits face-frame and frameless boxes equally, so it covers both traditional American and European-style cabinet construction in the same job. Homeowners replacing hinges on existing thick-door cabinetry will need to confirm the cup diameter and boring pattern match the existing holes before ordering.
The 94 degree limit is intentional for thick-door applications. A thick door has more depth at the hinge side, and restricting the swing to 94 degrees keeps it from catching on the cabinet face as it opens. It is the correct angle for this door type, not a shortcoming.
Yes. The hinge arm connects to a base plate that mounts to the cabinet side or stile, and that plate is sold separately. Use a Salice plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.
No. This hinge requires a 40mm cup bore, which is larger than the standard 35mm. If you are replacing hinges in existing holes, confirm your doors are bored to 40mm before ordering.
On a cabinet with two doors meeting at a center partition, each door uses a half overlay hinge so both doors cover roughly half of that shared partition without the arms colliding behind the doors.
Specify this hinge when the job calls for thick-door half overlay cabinetry with Silentia soft-close and a Nickel finish that carries through to the rest of the hardware.
Sold In: 1 Each
