Salice Soft-Close Silentia Inset Overlay Face-Frame;Frameless Hinges Nickel, 94° Screw-On - CNA7PE9

Salice Silentia Inset Hinge For Thick Doors

Salice Silentia inset hinge is a concealed cabinet hinge designed for profile and thicker doors, so it solves installations where standard European hinges do not give the required geometry on heavier or shaped door designs. The hinge provides a 94 degree opening angle, which gives doors enough travel for everyday cabinet access while helping control swing in tight runs or against adjacent cabinets. A 12 mm deep cup is built into the hinge design, allowing the hinge to fit doors where cup drilling depth is limited by panel thickness or decorative profiles. This hinge belongs to the Salice Series N family for profile and thicker doors, so it maintains a consistent system approach on projects that repeat this door construction. The hinge is finished in nickel, giving a neutral, cabinet-hardware-standard appearance that coordinates well with most interior hardware programs.

Key Salice Series N Hinge Working Advantages

• The hinge is part of Salice Series N for profile and thicker doors, which lets shops standardize on one hinge line when working with doors that move beyond typical flat, thin panels.
• The 94 degree opening angle controls the arc of the door, which is useful when lining up face-frame or frameless cabinets in tight banks where extra swing can cause interference.
• The 12 mm deep cup supports use on thicker or profiled doors, so drilling does not over-penetrate delicate designs and still gives secure seating for the concealed hinge.
• A soft-close Silentia mechanism is integrated into the hinge design, which slows door movement and reduces impact on the cabinet side, door edge, and hinge screws over repeated use.
• Nickel finish on the hinge body provides a familiar concealed-hinge look, which helps hardware layouts match other concealed components across a run of cabinets.

Inset Mounting And Plate Interface Details

The hinge is specified as an inset model, so the door edge sits within the cabinet opening rather than overlaying the front, which directly affects how face-frame and frameless cabinets are laid out. A screw-on mounting style is used for fastening, giving installers a straightforward mechanical attachment method to both the door and the mounting plate. Possible drilling distance on the door, designated as K, ranges from 3 to 14 mm, so hinge cup boring can be positioned to suit different reveals and profiles while staying inside the tested geometry. The hinge is compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates, which lets shops pair it with existing Salice plate inventories on both face-frame and frameless cabinets.

How This 94 Degree Inset Hinge Performs In Use

Using This Hinge On Profile And Thicker Doors

This concealed cabinet hinge is intended for profile and thicker doors, so it handles doors where raised panels, profiled edges, or heavier materials demand a hinge geometry tuned beyond standard thin-door hardware. By using a 12 mm deep cup, the hinge works with thicker or shaped door designs without requiring excessive drilling depth, which helps preserve material strength around the hinge area and supports long-term stability. The 94 degree opening angle gives a controlled swing that still feels open in daily use, making it suitable for cabinets where doors can hit adjacent cabinets or walls if the arc is too wide. Because the hinge sits in an inset configuration, the door aligns flush within the cabinet opening, which supports clean, furniture-style face-frame installations and frameless applications where door position relative to the case is critical. The nickel finish keeps the hardware visually consistent with standard concealed hinge programs, which matters when doors are opened and hardware appearance becomes part of the perceived cabinet quality.

Soft-Close Action And Mounting Plate Flexibility

The Silentia soft-close function is built into this hinge, so the motion of the door is controlled as it closes, reducing slamming and the associated stress on the cabinet side and hinge mounting points. This soft-close action is valuable on thicker or heavier doors, because it dampens the added momentum created by weight and depth, helping maintain alignment over time. Compatibility with all traditional Series 200 mounting plates means the hinge can tie directly into existing Salice plate layouts, which simplifies layout decisions on both new builds and upgrades using that plate family. The ability to use all Domi snap-on mounting plates adds workflow flexibility where quick mounting and removal from the plate are part of the shop or field process. A screw-on attachment for this hinge provides a familiar, precise fixing method that works well in both shop and on-site cabinet work, supporting accurate positioning relative to the door edge and cabinet side. With a drilling distance (K) range from 3 to 14 mm, installers can set their boring pattern to achieve the reveal and profile clearance they want, while staying inside the operating range engineered for this hinge.

Common Questions About Salice Silentia Inset Hinge

Selecting This Soft-Close Hinge For Your Project

This Salice Silentia inset hinge brings a 94 degree soft-close action, a 12 mm deep cup, and a design for profile and thicker doors, so it fits projects where door construction and controlled movement matter. Compatibility with Series 200 and Domi mounting plates means it ties into established Salice systems on both face-frame and frameless cabinets. For cabinetmakers and installers working with inset doors and thicker profiles, this hinge offers a concealed cabinet hinge solution that aligns geometry, soft-close behavior, and mounting plate flexibility in one part.