SurfPrep 400 grit sanding sheet is a 3 inch by 4 inch abrasive sheet designed for controlled sanding where a fine finish is required. The sheet uses aluminum oxide grain abrasive, which cuts efficiently while holding a consistent scratch pattern, so surfaces stay even instead of showing random deep marks. The abrasive is bonded with a resin glue coating, which secures the grain firmly during use and supports longer sanding runs on the same sheet before performance drops. The sheet is built on heavyweight paper backing, which resists edge tear-out as you sand into corners or along profiles, helping keep the sheet intact on multi-tool pads. An open-coat grain distribution spaces the aluminum oxide grains, which allows dust to clear from the sheet surface more easily and maintains cutting action instead of loading up quickly.
This 3 inch by 4 inch SurfPrep sanding sheet is engineered to work with multi-tool sanding pads from Makita and Bosch, so the footprint matches detail pads used in cabinetry and trim work. The sheet uses hook and loop attachment, which lets the abrasive sit flat on the pad and stay in place while still being easy to remove when switching grits or worn sheets. The 400 grit rating positions this sheet for fine sanding passes, so it can follow coarser grits to refine the surface on bare wood, paint, or varnish before further finishing steps. The aluminum oxide grain, resin glue bond, and heavyweight paper backing combine to give the sheet enough strength to stay aligned on the pad while following edges and corners on wood parts, fillers, and plastics.
This SurfPrep 400 grit 3 inch by 4 inch sheet is described as ideal for bare wood, paint, varnish, fillers, plastic and other materials, so it supports a range of shop and jobsite tasks. On bare wood, 400 grit allows light refinement of surfaces after coarser sanding, which prepares parts for finishes where a finer scratch is desired. On painted or varnished surfaces, the fine grit works for smoothing between coats, which helps level minor dust nibs while keeping the film thickness under control. When used on fillers, the sheet lets installers shape and smooth patches without deep gouging that would show through finishing. On plastics and similar materials, the open-coat aluminum oxide grain helps avoid heavy loading, so the sheet can continue to cut without smearing. The ability to fit Makita and Bosch multi-tool pads allows these tasks to be carried out with detail sanders in tight areas and along profiles.
The SurfPrep sanding sheet uses aluminum oxide grain abrasive combined with a resin glue coating, and this structure is described as improving material removal and adding durability, so operators get more work from each sheet. The open-coat grain distribution reduces grain clogging and improves finish on wood surfaces, which means the abrasive can keep cutting rather than glazing over with dust, supporting cleaner scratch patterns on trim, doors, and panels. The heavyweight paper backing provides strong support and reduces edge tear-out, which is valuable when running into corners or over sharp transitions that often shred lighter sheets. The hook and loop attachment interface allows the sheet to be seated firmly on multi-tool pads, which supports stable contact and helps keep the abrasive tracking flat instead of shifting. Together, these details support repeatable sanding results across bare wood, coatings, fillers, and plastics using the same 400 grit sheet.
This SurfPrep sanding sheet uses aluminum oxide grain abrasive, which provides increased durability and sharpness for extended cutting performance on wood, coatings, fillers, and plastics.
The open-coat grain distribution on this sheet reduces grain clogging, so dust clears more easily and the abrasive maintains cutting action and an improved finish on wood surfaces.
This SurfPrep sanding sheet uses heavyweight paper backing, which provides strong support and reduces edge tear-out during sanding along corners and profiles.
This 3 inch by 4 inch SurfPrep sheet is designed to fit Makita and Bosch multi-tool sanding pads, so it can be used on compatible detail sanders.
This SurfPrep 400 grit sheet is described as ideal for bare wood, paint, varnish, fillers, plastic and other materials, supporting mixed-material sanding tasks.
The resin glue coating on this SurfPrep sanding sheet secures the abrasive grain and works with the open-coat design to reduce clogging and support smoother finishes.
The SurfPrep 400 grit 3 inch by 4 inch hook and loop aluminum oxide sanding sheet is built for fine sanding passes on bare wood, paint, varnish, fillers, and plastic, so it fits detail finishing stages. The high quality aluminum oxide grain, resin glue coating, open-coat design, and heavyweight paper backing work together to support material removal while controlling loading and edge damage. With sizing that fits Makita and Bosch multi-tool sanding pads, these sheets align with common detail sanders in woodworking and finishing environments. Select this SurfPrep sheet when a consistent 400 grit scratch and stable pad attachment support your workflow.
Sold In: 1 Box