SurfPrep 150 Grit Sanding Pad is a 7 inch by 3 inch by 1/2 inch abrasive pad that uses aluminum oxide to cut the surface while you sand. That specific 7 x 3 footprint gives a compact hand pad that covers a useful area without feeling bulky, so it works well on parts where a full sheet would be awkward. The 1/2 inch thickness provides a cushioned body behind the abrasive layer, which helps the pad track over minor surface variations during hand sanding. The 150 grit rating sets this pad in a medium-fine range that removes light defects while preparing a surface for subsequent finishing steps. The pad is identified as a SurfPrep product in the Abrasives and Hand Sanding category, so it aligns with workflows where controlled hand sanding is part of the process. The SP3X7HLF150.10 part number provides a consistent way to reorder the same pad when a job standard relies on repeatable abrasive performance.
This SurfPrep 150 Grit 7 inch by 3 inch by 1/2 inch Aluminum Oxide 10-Hole Sanding Pad combines a defined size with a specific abrasive type to support repeatable hand sanding. The 7 inch length and 3 inch width set the working footprint you bring to the surface, so stroke length and overlap can be planned when sanding parts of similar scale. With 1/2 inch thickness, the pad carries enough body to back the abrasive while still allowing it to flex slightly in hand, which is useful when following minor contours. The aluminum oxide abrasive on the pad does the actual cutting, and the 150 grit level positions it for intermediate to finish-prep work. The description identifies 10 holes in this sanding pad, which means the surface layout is fixed for that pattern and allows consistent alignment habits wherever that detail is relevant to the process.
The SurfPrep 150 Grit 7 inch by 3 inch by 1/2 inch Aluminum Oxide 10-Hole Sanding Pad sits in the Abrasives and Hand Sanding category, and that placement centers it in workflows that rely on manual sanding steps. Its 7 inch length and 3 inch width give a pad size that works on components where a compact but still substantial contact area is useful, such as trim pieces or similar parts within that scale range. The 1/2 inch thickness shapes how the pad feels and responds in hand, providing backing that helps spread applied pressure across the aluminum oxide abrasive face. The 150 grit rating defines the surface texture it leaves, so it can be used as a middle or later step in an abrasive sequence wherever that grit level is called out.
The aluminum oxide construction of this SurfPrep sanding pad provides the abrasive surface that engages the work, so each pass follows the cutting characteristics typical of that abrasive class. The 150 grit designation stays consistent from pad to pad, allowing repeatable results when the same grit is specified across multiple pieces or projects. With dimensions of 7 inches by 3 inches by 1/2 inch, the pad shape remains the same each time the SP3X7HLF150.10 part number is used, which supports standardized sanding motions and coverage patterns on similar workpieces. The description noting a 10-hole sanding pad fixes the pattern detail on this product, so the physical layout of the pad does not change between orders. Being identified as a SurfPrep product in Abrasive Pads and Sponges for hand sanding ties these details together into a predictable tool for manual surface preparation.
The SurfPrep 150 Grit Sanding Pad measures 7 inches long, 3 inches wide, and 1/2 inch thick, which defines the contact area and backing depth during hand sanding tasks.
The SurfPrep 150 Grit Sanding Pad uses 150 grit abrasive, placing it in a medium-fine range suited to refining surfaces after coarser sanding steps in a process.
The SurfPrep 7 inch by 3 inch pad uses aluminum oxide as the abrasive material, which provides the cutting action on the work surface during hand sanding.
The SurfPrep 7 inch by 3 inch sanding pad is 1/2 inch thick, giving a supportive body behind the abrasive surface while still allowing hand-controlled flex.
The SurfPrep aluminum oxide sanding pad is described as a 10-Hole Sanding Pad, indicating this product has a defined ten-hole pattern in its pad design.
The SP3X7HLF150.10 designation identifies this exact SurfPrep 150 Grit 7 inch by 3 inch by 1/2 inch Aluminum Oxide 10-Hole Sanding Pad for ordering and inventory use.
The SurfPrep 150 Grit 7 inch by 3 inch by 1/2 inch Aluminum Oxide 10-Hole Sanding Pad brings a known size, a specific 150 grit level, and aluminum oxide abrasive together in one consistent product. That combination suits workflows where a repeatable hand sanding pad is part of the standard process. Specifying the SP3X7HLF150.10 part number ties your order directly to this SurfPrep Abrasive Pads and Sponges product, so the same dimensions and grit return to your bench each time it is used in shop routines.
Sold In: 1 Box