47 inch wooden handrail from Quiet Glide is designed to be used with Quiet Glide's rolling ladders that use 1-1/4 inch square stock, so it ties directly into that specific ladder system for consistent fit and layout on library or similar ladder runs. The handrail is made from maple, giving you a solid wooden rail that matches other maple ladder components in the Quiet Glide line for a unified appearance along the ladder track. A clear coat finish on the maple provides a finished surface right out of the box, so the rail arrives already sealed and visually ready for installation in finished spaces. The handrail set is steam-bent, which shapes the wood to follow the intended ladder hand position and curve, helping the rail track naturally with the user's grip as the ladder moves. The steam bending also sets the profile so both rails match each other in form along the run.
This Quiet Glide wooden handrail is designed to be used with Quiet Glide's rolling ladders that use 1-1/4 inch square stock, so its geometry and drilling are set up to align with that ladder format and the matching side components. The maple rail is pre-drilled, so the holes for the 1/4-20 KD bolts are already located into the rail, which sets consistent spacing for each fastening point along both rails. Using satin nickel 1/4-20 KD bolts and 1/4-20 KD nuts ties the rail to a known thread standard, simplifying how it connects to compatible ladder brackets or side structures in the Quiet Glide system. The 47 inch length defines the span of each bent wood handrail, creating a repeatable section length that can be planned into the ladder run or opening where the rail will be aligned.
This Quiet Glide maple handrail is designed to be used with Quiet Glide's rolling ladders that use 1-1/4 inch square stock, so it is suited to installations that are already based on that specific ladder format. Within that context, the 47 inch bent wood handrails run alongside the ladder travel path, giving a defined grasp area that mirrors the ladder movement along the track. Steam-bent construction shapes each rail into its working contour, so when mounted relative to the ladder, the handhold follows a consistent arc rather than a straight, unshaped stick. The maple material brings a furniture-grade wood species into the ladder hardware assembly, which can be important in library, office, or residential built-ins where wood tone and grain alignment with other maple components matters. The clear coat finish further supports these locations by presenting the rail in a finished state, visually ready for exposed installation where the ladder and rail are part of the room presentation.
The pre-drilled maple handrails in this Quiet Glide setup place the fastening holes in fixed, repeated locations, which helps keep both sides of the ladder run aligned when the 1/4-20 KD bolts are tightened through the rail. By using 1/4-20 KD bolts and 1/4-20 KD nuts in satin nickel, the handrail connects through a standard coarse thread interface, promoting repeatable clamping at each connection point and a uniform satin nickel appearance at exposed metal locations. The 47 inch length of each steam-bent wood handrail segment sets a predictable section size, so ladder designers can plan rail coverage in relation to shelf spans, openings, or track segments. Because the handrail is designed for Quiet Glide rolling ladders based on 1-1/4 inch square stock, it stays within that product family geometry, which reduces layout mismatches between the rail and other Quiet Glide ladder hardware components across the same installation.
This Quiet Glide wooden handrail is designed to be used with Quiet Glide's rolling ladders that use 1-1/4 inch square stock, aligning it with that specific ladder family.
Each bent wood handrail in this Quiet Glide setup is 47 inches long, defining the span you can plan into your ladder run.
The handrail is made from maple with a clear coat finish, giving you a maple wood rail with a sealed surface ready for interior ladder use.
The maple handrail is steam-bent, so the wood is formed into a specific contour that follows the intended hand position along the rolling ladder path.
The handrail uses 1/4-20 KD bolts in 45mm satin nickel and 1/4-20 KD nuts in 17mm satin nickel, creating a matched satin nickel fastener set.
The maple handrail is pre-drilled, so the holes for the 1/4-20 KD bolts are already located, helping keep fastening points consistent along the rail.
This Quiet Glide 47 inch wooden handrail is designed to be used with Quiet Glide's rolling ladders that use 1-1/4 inch square stock, so it ties directly into that system layout. Maple construction with a clear coat finish gives a ready-to-use, finished rail surface for interior ladder settings. Steam-bent shaping and pre-drilled holes support consistent alignment of the rails and their 1/4-20 satin nickel KD bolt connections along the ladder path. For projects built around Quiet Glide rolling ladders, this handrail provides a matching maple rail option that is aligned with the 1-1/4 inch square stock ladder format.