47 inch wooden handrail from Quiet Glide is designed to be used with Quiet Glide's Rolling Ladders, so it matches the system geometry and supports a consistent handhold along the ladder rail. The handrail uses 1-1/4 inch square stock, which gives a predictable profile for gripping and aligning with standard Quiet Glide ladder components. The rail is steam-bent, creating a smooth, controlled curve that follows the ladder path for a comfortable and continuous reach during climbing. A clear coat finish on the maple seals the wood surface, which helps the handrail maintain its appearance while providing a smooth feel under hand. The satin brass KD bolts and nuts coordinate visually with other satin brass elements in the ladder hardware, supporting a uniform hardware look across the installation.
The wooden handrail is pre-drilled, so the KD bolt locations are set from the factory and the hole spacing is consistent across both bent wood handrails in the kit. That fixed pattern helps align the rail to corresponding ladder or bracket points without laying out hole centers on site. The clear coat finish on the maple is applied before use, so the wood does not need finishing work before installation. The satin brass KD bolts and KD nuts are sized as 1/4-20 components, which defines the thread and diameter used where the handrail fastens to the ladder structure. The 47 inch length of each handrail segment provides a predictable measurement for planning bracket positions along the ladder run.
This 47 inch wooden handrail is designed to be used with Quiet Glide's Rolling Ladders, so it integrates into rolling ladder configurations built around Quiet Glide hardware. The 1-1/4 inch square stock matches the stated stock size for the system, which supports a consistent rail profile wherever the handrail is installed. The steam-bent shape aligns the handrail with the intended ladder path, which matters when following the movement line users take as they climb or descend. The clear coat finished maple works well in woodworking and millwork environments that use finished wood components, so the handrail can visually tie into surrounding casework. Satin brass components on the handrail match the satin brass description of the KD bolts and KD nuts, supporting continuity when other satin brass ladder hardware is present.
Each bent wood handrail is pre-drilled and uses 1/4-20 KD bolts and 1/4-20 KD nuts, so the fastener thread and approximate clearance hole sizing are predefined, which helps repeat the same fastening method across multiple ladders. The 47 inch length of the wooden handrail provides a fixed dimension that can be used to plan joint locations along the run, reducing layout variation on repeated projects using the same Quiet Glide specification. The steam-bent construction keeps the curve consistent from piece to piece, which matters when multiple handrails need to align visually across a longer installation. With the maple handrail already finished with clear coat, the rail arrives with the surface sealed, so the finishing step does not have to be repeated on site and the feel of the handrail stays uniform between installations using this part number QG.6309.MA.06B-P.
This 47 inch wooden handrail is designed to be used with Quiet Glide's Rolling Ladders, so it is suited to projects built around Quiet Glide ladder hardware.
The handrail is maple with a clear coat finish, giving a sealed wood surface that shows the maple while providing a smooth feel in rolling ladder use.
The 47 inch wooden handrail uses 1-1/4 inch square stock, which sets the handrail profile and works with Quiet Glide rolling ladder layouts.
The maple rail is steam-bent, creating a controlled curve that tracks the typical rolling ladder path and supports a continuous, comfortable handhold.
This 47 inch wooden handrail uses 1/4-20 KD bolts and 1/4-20 KD nuts, defining the thread and diameter used where the handrail attaches.
Each bent wood handrail in this maple assembly is 47 inches long, which provides a known span for planning ladder rail and bracket positions.
The 47 inch wooden handrail with satin brass KD bolts and KD nuts is tailored for Quiet Glide's Rolling Ladders, giving a defined length, 1-1/4 inch square stock profile, and steam-bent maple with clear coat. Those details help align rolling ladder projects to a consistent rail shape, finish, and fastening pattern tied directly to manufacturer part number QG.6309.MA.06B-P.