Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 634 is an 18 inch full-extension, soft-close undermount drawer slide built for drawer boxes with sides up to 3/4 inch (19mm) thick. It ships complete with 2D front locking devices and rear mounting brackets, so both face-frame and frameless installs have the hardware they need in one order.
The PRO 634 targets shops and contractors who build with 3/4 inch drawer box material and need a concealed, soft-close slide that works in either face-frame or frameless cabinetry. Kitchen base cabinets, bathroom vanities, and laundry room drawers are the natural home for this slide — anywhere a clean, hardware-free look is wanted and the box is built from 3/4 inch hardwood or plywood stock. The included rear brackets make it equally practical on a frameless run and a traditional face-frame job without a separate bracket order interrupting the project.
Steel members with a zinc finish give the PRO 634 the corrosion resistance it needs for years of indoor service. The zinc finish is functional and largely out of sight once the drawer is installed — the slide rides concealed beneath the box, so the look of the finished cabinet is unaffected. Soft-close damping is integrated into the slide body, keeping the mechanism protected and the close consistent over time.
This slide is the right choice for cabinet shops and contractors whose standard drawer box is 3/4 inch stock and who want a complete undermount package — locking devices and rear brackets in the box — rather than sourcing accessories separately. Homeowners tackling a renovation with 3/4 inch drawer boxes will find the included hardware simplifies the install. If your drawer sides are 5/8 inch (16mm) or thinner, choose the 16mm version of this slide instead; the two versions are not interchangeable.
Yes. The included rear mounting brackets support the back of the slide in face-frame construction, so no additional bracket order is needed for that application.
The PRO 634 is engineered for drawer sides up to 3/4 inch (19mm) thick. It is a separate model from the 5/8 inch version and the two are not interchangeable — match the slide version to your actual drawer side thickness before ordering.
Per pair, as undermount ratings are stated throughout this category. The 100 lb rating covers the working load of one drawer running on both slides together.
Yes. The PRO 634 is a full-extension slide, so the entire drawer box comes out to the cabinet face — the full depth of the drawer is reachable when open.
No. The 2D front locking devices ship with this slide, so height and side adjustment are available from the moment the drawer is hung. Rear mounting brackets are also included.
Yes. Like all undermount slides, the PRO 634 requires the drawer box to be built to the manufacturer's specification for this series — nominal 18 inch length, correct box width, bottom recess, and rear notch for the locking devices. An off-spec box will not seat correctly on the slides.
With locking devices and rear brackets already in the box, the PRO 634 keeps the project moving — one line item covers the slide, the clips, and the face-frame hardware your install needs.
Sold In: 6 Set