Blo-Gun Full Flow Safety Lever is a Milton Industries air lever blowgun designed for general shop air line use where controlled cleaning and blowing are needed. This blowgun meets OSHA requirements of special relief holes in nozzle which limits pressure to 30 psi when dead ended, so static pressure at the tip stays within safety guidelines during blocked-flow situations. The blowgun is rated for a maximum working pressure of 150 psi, allowing it to connect to common shop air systems without restricting typical line pressures. It delivers 10.0 SCFM at 100 psi, providing a strong, predictable air stream for clearing dust, chips, or debris from work areas. A 1/4 NPT air inlet connects the tool directly to standard air hose fittings, keeping hook-up straightforward in most compressed air layouts. The Milton 150BK part number identifies this specific configuration for reorders and standardization.
The Milton Industries Blo-Gun Full Flow Safety Lever uses a 1/4 NPT air inlet, so the connection point matches a common thread format in many compressed air systems and manifolds used around woodworking and shop environments. This thread detail supports direct installation on standard hoses or quick-connect fittings that use 1/4 NPT, maintaining predictable sealing and alignment at the handle. On the outlet end, the nozzle thread size of 7/16-27 and body outlet thread size 1/2-27 specify the interface dimensions at the discharge side, so the assembler knows the exact threads interacting at the gun outlet. With a maximum working pressure of 150 psi, the blowgun remains compatible with many regulated shop air lines set at or below that pressure level, supporting consistent operation during repeated connection and use.
The Milton 150BK Blo-Gun Full Flow Safety Lever sits in the air line as an air lever blowgun for cleaning and blow-off work in shop environments that value both airflow and safety behavior at the nozzle. Meeting OSHA requirements of special relief holes in nozzle which limits pressure to 30 psi when dead ended means that, during a blockage at the tip, the nozzle vents in a controlled way while static pressure stays around 30 psi, supporting safer use during close-range cleaning where surfaces or hands may approach the outlet area. The 10.0 SCFM at 100 psi rating supplies a measurable airflow for clearing sawdust, metal chips, or general debris, so users can relate the performance to other air tools in the system. With a maximum working pressure of 150 psi, the blowgun can be positioned on lines that routinely operate under that pressure, giving flexibility in where it is deployed on the shop manifold.
The 1/4 NPT air inlet on the Blo-Gun Full Flow Safety Lever allows installers to tie this Milton Industries blowgun into established 1/4 NPT air circuits, reducing the need for thread changes and helping preserve consistent leak-tight joints at the handle. On the outlet side, the 7/16-27 nozzle thread size and 1/2-27 body outlet thread size define how the nozzle region interfaces with other components built around those thread standards, so the technician knows exactly what threads are present when planning the downstream layout. The SCFM 10.0 at 100 psi flow rating lets users predict how much air capacity the blowgun draws from the system when operated at typical shop pressures, which matters when matching it with compressors and other air tools on the same line. Together with the maximum working pressure of 150 psi, these specs outline a clear operating window so the blowgun can be used day after day within defined system limits.
The Blo-Gun Full Flow Safety Lever meets OSHA requirements of special relief holes in nozzle which limits pressure to 30 psi when dead ended, supporting controlled static pressure behavior at the tip.
The Blo-Gun Full Flow Safety Lever has a maximum working pressure of 150 psi, so it operates on many regulated shop air systems built around that pressure level or lower.
The Milton 150BK air lever blowgun delivers 10.0 SCFM at 100 psi, giving a defined airflow level for blowing off dust, chips, and debris during routine cleaning work.
The Blo-Gun Full Flow Safety Lever uses a 1/4 NPT air inlet, so it connects to many standard compressed air hoses and manifold fittings using that thread format.
The Milton Industries Blo-Gun Full Flow Safety Lever has a nozzle thread size of 7/16-27 and a body outlet thread size of 1/2-27, defining the threaded interfaces at the discharge side.
The 150BK designation is the manufacturer part number for this Milton Industries Blo-Gun Full Flow Safety Lever, helping users reference the exact air lever blowgun when sourcing and reordering.
The Milton Industries Blo-Gun Full Flow Safety Lever combines a 1/4 NPT air inlet, 10.0 SCFM at 100 psi performance, and a 150 psi maximum working pressure in one air lever blowgun, so it aligns well with many shop air systems. Its OSHA-oriented nozzle design with special relief holes that limits pressure to 30 psi when dead ended defines how the outlet behaves under blockage, which matters during close-quarters cleaning. With clearly specified 7/16-27 nozzle threads and 1/2-27 body outlet threads, the Milton 150BK air lever blowgun gives installers the dimensional details needed to integrate it into existing air line layouts efficiently.
Sold In: 1 Each