Doellken PVC Edgebanding 1 5/16" x 0.020", 2416 Black, 600', 2416 2120 1

PVC Edgebanding 1-5/16 x 600 Roll For Black Panels

PVC edgebanding 1-5/16 x 600 roll from Doellken Woodtape provides a continuous edge treatment for casework and panels where a black finish is required, so long runs can be completed with consistent color along the entire length. The 0.020 inch thickness keeps the edge profile slim, which supports tight reveals on cabinet parts and helps panels align cleanly at doors and drawer fronts. The 1-5/16 inch width suits work where the substrate edge is close to this dimension, allowing trimming without excessive waste. Color 2416 Black defines the visual tone of the strip, giving a uniform dark edge that matches a wide range of black decorative surfaces. Supplied on a 600 foot roll, the material supports production environments that run multiple parts in the same black color, reducing changeovers between different rolls during a job.

Key Black Color Matches For This Edgebanding

• Color match to American Laminates Black is listed as good, which helps edges visually align with that surface in finished casework where sheet and edge share the same run.
• Color 2416 Black is noted as good with Arauco Prism BLK100 Black Suede, supporting consistent panel and edge appearance on jobs using that board.
• The edgebanding is a good match for Formica 909 Black 58 Matte, helping HPL-faced components carry the same black tone onto the edge profile in laminate projects.
• Good match to Wilsonart 1595 Black 60 Matte means the edge visually carries the laminate color, reducing visible transition between face and edge on commercial fixtures.
• Good matches to Uniboard 631 Classic Black Dolomite and 888 Nova Black Dolomite let the same 2416 Black edge serve different Uniboard panel lines on a project.
• Good matches are also listed for Pionite SE101 Black N Suede and Panolam S405 Black Satin, giving flexibility when the shop works with multiple black TFL or HPL suppliers.

Edgebanding Dimensions That Support Clean Installation

The 1-5/16 inch width of this edge banding provides overhang on common panel thicknesses, which allows trimming back to a flush edge without exposing substrate. The 0.020 inch thickness sets a modest edge build, which helps doors and drawer fronts maintain even gaps when multiple edged components line up in a run. Supplied as a 600 foot roll, the length supports feeding through edgebanders across many cabinet parts in sequence, limiting mid-job roll changes that interrupt setup. The material is in the edge banding product class, so it is intended to finish raw panel edges where a matching black face material is already selected.

Using 2416 Black PVC Edgebanding In Real Projects

Where This 2416 Black Edgebanding Is Applied

This PVC edgebanding, in color 2416 Black, is matched as good to a broad group of black decorative surfaces, including American Laminates Black, Arauco Prism BLK100 Black Suede, and Nevamar S6001 Black Textured. These matches support use on cabinets, fixtures, and furniture built from those boards, so the edge tone follows the face material around doors, shelves, and gables. Additional good matches to Pionite SE101 Black N Suede, Pluswood 90S Black, Roseburg Duramine 006 Black Suede, and Thermo Pressed TFL-001 Black allow a single edge color to cover projects that mix board suppliers. Good matches to BauschLinnemann decors such as 40504 Ebony Black, 48261 Black, and 66966 Black Stipple, as well as laminates like Laminova ALL-0002 Negro and Lamitech 2110 Cinder, make this roll useful wherever those surfaces appear on a job. Close ratings for Decore-Ative Black Oak and Roucke Black also extend its use to panels that are not exact but are visually near this 2416 Black tone.

Why The Roll Format And Matches Reduce Rework

The 600 foot roll length supports longer production runs on edgebanders, which lets multiple cabinets be processed in one setup while holding the same 2416 Black color from part to part. This continuity cuts down on visual shifts that can appear when switching between shorter rolls during a project. The color match listings to products such as Wilsonart 1595 Black 60 Matte, Formica 909 Black 58 Matte, and Panolam S405 Black Satin provide a defined target for pairing sheet goods and edging, helping layout and cutting crews assign the same edge roll across all matching faces. Good ratings with Uniboard 631 Classic Black Dolomite, Uniboard 888 Nova Black Dolomite, and StevensWood 174 Black Rain Softex allow shops to standardize on this single black edge color while still using various black textures or sheens. The PVC edgebanding category designation identifies it for typical edgebanding equipment and workflows, so production teams can route it through existing edge processing lines wherever these listed panel brands are specified.

Common Questions About 2416 Black PVC Edgebanding

Selecting This 2416 Black Roll For Your Next Run

The Doellken Woodtape PVC edgebanding, 1-5/16 inches wide and 0.020 inch thick in color 2416 Black, pairs as a good match with many leading black laminates and TFL boards, so one roll can support varied specifications. With a 600 foot roll length, it fits well into continuous edgebander workflows on cabinet, casework, and fixture jobs built around American Laminates, Arauco Prism, Formica, Wilsonart, Uniboard, and other listed black surfaces. For projects centered on black decorative faces, this edge banding provides a defined color reference that carries the face tone around exposed edges.