Kinetron Pendaflex Hanging Rail Bracket, Zinc, KHFB-TM-ZC

KHFB Top-Mount Hanging File Bracket For Drawers

KHFB top-mount hanging file bracket is a Kinetron Corporation file drawer component that fastens to the top of the drawer box and screws into the top of the drawer side material, so file storage can be built directly into a drawer construction. This bracket is part of the Pendeflex bracket family, which is designed to affix 1/8 inch thick file rail, giving you a defined interface for hanging file rails in a drawer. The bracket is classified as a file drawer component in drawer box accessories, so it fits naturally into drawer construction systems work. The KHFB-TM-ZC designation identifies this specific top-mount configuration in a zinc finish, which aligns with projects calling for zinc-colored metal hardware inside the drawer.

Key File Drawer Bracket Details For Projects

• Pendeflex brackets are constructed of 16 gauge steel, providing a substantial metal section that supports the 1/8 inch thick file rail in a file drawer application.
• The bracket is designed to affix 1/8 inch thick file rail, creating a consistent mounting edge that matches the Pendeflex hanger rail dimensions in drawer box layouts.
• The top-mount design fastens to the top of the drawer box and screws into the top of the drawer side material, tying the bracket directly into the drawer structure for stable file rail support.
• This style comes in a zinc finish, so the visible metal surface matches other zinc-tone drawer components when the drawer is open.
• The product is sold in full box quantities of 100 each per box, supporting multi-drawer or multi-cabinet runs where the same bracket is repeated across a project.

Top-Mount Bracket Installation Role In Drawers

The KHFB top-mount hanging file bracket is designed specifically to fasten to the top of the drawer box and to be screwed into the top of the drawer side material, so it becomes part of the drawer structure rather than a separate insert. By targeting the top of the drawer sides, the bracket positions the 1/8 inch thick file rail at a predictable height relative to the drawer top, which helps maintain consistent file hanging levels across multiple drawers. Because the design is a top-mount style, it supports layouts where the file rail needs to be aligned along the upper edge of the drawer box, which is typical in file drawer construction systems that carry folders from side to side.

Using Pendeflex Brackets In File Drawer Systems

Where This KHFB Top-Mount Bracket Fits

This KHFB top-mount hanging file bracket is part of drawer construction systems and drawer box accessories, so it is suited to drawers that are being built or configured as file drawer components. By fastening to the top of the drawer box and tying into the top of the drawer side material, the bracket fits along the upper interior line of the drawer, where hanging file rails are commonly positioned. The bracket is intended to work with Pendeflex hanger rail that is constructed of 1/8 inch thick aluminum flat stock, so its design aligns with that rail thickness for proper engagement.

The Pendeflex hanger rail used with this bracket is described as 72 inches long and constructed of 1/8 inch thick aluminum flat stock, which gives installers a long, uniform rail section that can be cut and fitted to multiple drawers within a project. That rail comes in two heights, 1/2 inch and 3/4 inch, so the bracket connection point is created to accept 1/8 inch thick material while allowing the height selection to determine how high the hanging folders sit. Because the Pendeflex system rail also comes in Plain Aluminum and Black finishes, the zinc finish of this KHFB-TM-ZC bracket can be matched with rail color choices based on interior aesthetics of the cabinet run.

Why These File Rail Details Help Consistency

Because Pendeflex brackets are constructed of 16 gauge steel, they provide a sturdy base for the 1/8 inch thick file rail, which directly supports hanging files along the drawer width. The defined 1/8 inch interface means the aluminum flat stock hanger rail fits consistently from bracket to bracket, so the rail alignment is repeated across multiple drawers built with the same system. The KHFB-TM-ZC top-mount layout, fastening at the top of the drawer box and into the top of the drawer side, keeps the file rail at a known elevation, which supports consistent folder clearance under the drawer top.

With the Pendeflex hanger rail available in two heights, 1/2 inch and 3/4 inch, a shop can select a rail height that matches the desired hanging folder exposure while still working within the bracket design that holds 1/8 inch thick material. The 72 inch rail length lets fabricators cut several drawer-width rails from a single aluminum flat stock piece, which can streamline file drawer construction when many identical drawers use the same KHFB top-mount hanging file bracket. In combination, the 16 gauge steel bracket and aluminum hanger rail details establish a repeatable file drawer component system for use in cabinet projects.

Common Questions About This Pendeflex Bracket

Select KHFB Top-Mount Brackets For File Drawers

The KHFB top-mount hanging file bracket in zinc from Kinetron Corporation gives you a defined way to fasten 1/8 inch thick Pendeflex hanger rail to the top of a drawer box and into the top of the drawer side material. For file drawer construction systems that rely on consistent hanging file performance, selecting this KHFB-TM-ZC file drawer component in full box quantities aligns the bracket, file rail interface, and drawer structure under one coordinated Pendeflex bracket system.