
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
4-1/8 inch trash grommet from Hardware Concepts, Inc. is a black trash grommet designed for a 4-1/8 inch diameter opening, so it creates a defined pass-through edge where waste is dropped through a counter or cabinet surface. The 7/8 inch height on this Hardware Concepts 6122-014 grommet provides a low profile lip at the opening, which helps separate the cut edge of the surface from the trash opening for a cleaner transition. The black finish on this 4-1/8 inch diameter trash grommet visually frames the opening, which helps conceal the raw cutout and keeps the opening looking consistent with other dark hardware. As a single-piece trash grommet, this 1PC 4-1/8 x 5/8 trash grommet BLK part provides a simple part choice when laying out a dedicated waste drop zone.
This Hardware Concepts 4-1/8 inch diameter black trash grommet uses its stated 4-1/8 inch diameter as the reference for the opening, which guides how the cutout is sized during fabrication. The 7/8 inch height gives a sense of how much vertical edge stands at the opening, which affects how the grommet meets the surrounding surface line. With the SAP description listing 1PC 4-1/8 x 5/8 trash grommet BLK, this defined size information helps keep cabinet and top layouts consistent when repeating the same trash drop opening across multiple locations.
This Hardware Concepts, Inc. trash grommet sits within the Kitchen & Bath Cabinet Accessories category, placing it in typical cabinet and countertop environments where waste openings are planned. The Trash Bins & Grommets classification clarifies that the 4-1/8 inch diameter black trash grommet supports trash drop-through points near work areas, which keeps waste access concentrated at a defined opening. Its 4-1/8 inch diameter dimension guides how it pairs with a corresponding trash opening in a work surface, helping maintain a consistent reveal around the cutout. The 7/8 inch height allows the grommet lip to create a controlled edge around the hole, which keeps the transition between surface and opening uniform from one location to another in the same room.
The stated 4-1/8 inch diameter on the 6122-014 trash grommet sets a clear size standard, which supports repeatable fabrication of matching cutouts across multiple tops or panels using the same reference measurement. The 7/8 inch height works with that diameter to define the grommet profile, which helps designers and installers visualize how high the edge will stand when coordinating with adjacent elements such as nearby hardware or trim. The black finish on this 4-1/8 inch trash grommet gives a consistent color reference, which matters when aligning it with other Hardware Concepts, Inc. components specified in similar finishes. With the SAP description calling it 1PC 4-1/8 x 5/8 trash grommet BLK, the part number and dimensions together support straightforward re-ordering, which helps keep replacement and expansion work aligned to the original installation.
This Hardware Concepts 4-1/8 inch diameter black trash grommet is sized around a 4-1/8 inch opening, so that dimension guides the cutout used for a matching trash drop point.
The Hardware Concepts 6122-014 trash grommet has a 7/8 inch height, which defines how much of the grommet edge stands above the surrounding surface at the opening.
This 4-1/8 inch trash grommet is black, which lets it visually frame the trash opening and coordinate with other dark cabinet hardware in the space.
The 4-1/8 inch diameter black trash grommet with part number 6122-014 is from Hardware Concepts, Inc., placing it within their cabinet accessory line.
This Hardware Concepts trash grommet is listed under Kitchen & Bath Cabinet Accessories in the Trash Bins & Grommets product class, aligning it with trash opening applications.
This black trash grommet is referenced by manufacturer part 6122-014 and the SAP description 1PC 4-1/8 x 5/8 trash grommet BLK, aiding consistent re-ordering.
The 4-1/8 inch trash grommet from Hardware Concepts, Inc. combines a 4-1/8 inch diameter, 7/8 inch height, and black finish, so it creates a defined trash opening that visually frames and protects the cut edge. With its 6122-014 identifier and 1PC 4-1/8 x 5/8 trash grommet BLK description, this part gives fabricators and installers a clear, repeatable choice when standardizing trash drop-through points across kitchen and bath cabinet projects.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | PL6122A Mfr# 6122-029 | Hardware Concepts 4-1/8" Diameter Almond Trash Grommet 7/8"H, - 6122-029 | ||||
Sold in: 1 Each | PL6144BN Mfr# 6144-058 | Hardware Concepts 6" Diameter Brown Trash Grommet 1"H, - 6144-058 | ||||
Sold in: 1 Each | PL6144GY Mfr# 6144-021 | Hardware Concepts 6" Diameter Gray Trash Grommet 1"H, - 6144-021 | ||||
Sold in: 1 Each | PL6144WH Mfr# 6144-010 | Hardware Concepts 6" Diameter White Trash Grommet 1"H, - 6144-010 | ||||
Sold in: 1 Each | PL6122GD Mfr# 6122-075 | Hardware Concepts 4-1/8" Diameter Gold Trash Grommet 7/8"H, - 6122-075 | ||||
Sold in: 1 Each | PL6122GY Mfr# 6122-021 | Hardware Concepts 4-1/8" Diameter Gray Trash Grommet 7/8"H, - 6122-021 | ||||
Sold in: 1 Each | PL6122WH Mfr# 6122-010 | Hardware Concepts 4-1/8" Diameter White Trash Grommet 7/8"H, - 6122-010 | ||||
Sold in: 1 Each | PL6144A Mfr# 6144-029 | Hardware Concepts 6" Diameter Almond Trash Grommet 1"H, - 6144-029 | ||||
Sold in: 1 Each | PL6144BL Mfr# 6144-014 | Hardware Concepts 6" Diameter Black Trash Grommet 1"H, - 6144-014 |