Hardware Concepts 4-1/8" Diameter White Trash Grommet 7/8"H, - 6122-010

A Clean White Trash Grommet Built for Light Countertops

This Hardware Concepts countertop trash grommet installs into a cut countertop opening to create a finished waste pass-through, guiding scraps and waste directly into a bin below while keeping the countertop edge clean and protected.

Key Features

• White finish blends with white laminate, painted, and light-colored countertop surfaces.
• 4-1/8 inch bore diameter sets the required countertop cutout for a flush, finished fit.
• 4-3/8 inch flange diameter sits over the cutout edge to cap and protect the opening.
• 7/8 inch liner depth provides a short, low-profile drop into the countertop panel.
• Plastic construction keeps weight minimal and resists everyday moisture exposure at the counter surface.

Where This Grommet Earns Its Place

A countertop trash grommet turns a cut hole into a finished, functional opening. Sweep vegetable peelings, scraps, or small debris from the counter directly into the opening and down into a bin or bag set below. It is a common detail in prep areas, kitchen islands, bakery workstations, and any countertop run where a waste pull-out or under-counter bin is part of the layout. The white finish is the right call where the countertop, cabinet doors, or surrounding hardware are already white or near-white, keeping the grommet from reading as a dark spot against a light surface.

Material and Fit

The grommet is molded plastic, which keeps it light and easy to seat in the opening without adding load to a thin countertop panel. The flange diameter of 4-3/8 inches overlaps the cutout and sits flat on the surface, protecting the cut edge. The bore diameter of 4-1/8 inches is the dimension to cut to: the bore is the through-hole the waste passes through, and the flange covers the margin around it. At 7/8 inch deep, the liner sits into a standard countertop panel without projecting far into the space below, which leaves clearance for the bin or liner below it. This is a replacement and standalone accessory, not a kit with a bin included.

Who Reaches for This One

Cabinet shops building out kitchen islands with integrated waste openings, contractors finishing prep counters in commercial or residential kitchens, and homeowners replacing a worn or missing grommet all find this size useful. White is the dominant finish choice for painted or laminate countertop surfaces and white-door cabinet runs. If the countertop is a darker material or a natural wood finish, check the other available finishes in this family to find the closest match. A bin or waste receptacle placed below the opening is a separate purchase.

Common Questions

The Right Finish for a Light Countertop Surface

This white plastic trash grommet finishes a 4-1/8 inch countertop cutout cleanly, keeping the waste opening looking intentional and protecting the cut edge on white and light-colored countertop surfaces.