Toilet Door Hardware Components Surface Mounted Hinge Kits, Square RH In-Swing / LH Out-Swing

Surface Mount Hinge For Toilet Door Control

Surface mount hinge describes this Jacknob Corporation JN7400 Series hinge kit for toilet doors, designed as a surface mounted hinge solution for partition doors in commercial restrooms. The product is identified as a toilet door hardware components surface mounted hinge kit with a square barrel, right-hand in-swing and left-hand out-swing configuration, so it targets doors that must swing into the stall from the right when viewed from outside. This hinge kit is part of the toilet door hardware class, which keeps it aligned with common partition layouts in public and commercial installations. Two hinge sets are recommended for up to 50 lb doors, so each door can be supported with the hinge count that matches its weight. JN7400 Series hinges are recommended by DuPont for use on Corian doors, which ties this hinge choice directly to solid-surface toilet doors built from that material.

Key Surface Mounted Hinge Details For Pros

• Two hinge sets are recommended for up to 50 lb doors, so installers can match the number of hinge sets to the typical weight range of commercial toilet doors and plan door support and layout around that guidance.
• The hinge kit is a square barrel JN7400 Series surface mount design, which positions the hinge barrel on the surface of the toilet door and frame area, supporting straightforward placement on partition faces without mortising.
• JN7400 Series hinges are recommended by DuPont for use on Corian doors, so this hinge configuration aligns with Corian toilet door builds where the substrate and hardware pairing has manufacturer-backed use.
• The hand of the door is determined from the outside of the stall, tying hinge hand selection to the direction the door swings from the corridor side and simplifying layout decisions for right-hand in-swing or left-hand out-swing stalls.
• The product name specifies square RH in-swing and LH out-swing, so installers can match the hinge kit to doors that swing inward with hinges on the right when viewed from outside the stall, or left-hand doors swinging out.

Mounting And Handing Details For Surface Hinge Setup

This surface mount hinge kit is specified as right-hand in-swing and left-hand out-swing, so the same kit addresses stalls where doors either swing into the stall from the right side or swing out with a left-hand orientation. The hand of the door is determined from the outside of the stall, which anchors hinge selection to the direction observed from the public side of the partition line. When facing the stall from outside, if the door swings into the stall and the hinges are on the right, that configuration matches this right-hand in-swing hinge description. Because this hinge is a surface mount pattern, it locates on the face of the toilet door and mating partition surfaces, fitting typical metal or solid-surface partitions without mortising operations.

Toilet Door Hardware Hinge Use In Stalls

Where This Surface Mounted Hinge Kit Is Applied

This Jacknob Corporation surface mount hinge kit is categorized as toilet door hardware and builders hardware, so it is intended for use on toilet partition doors in commercial or public restrooms where partition framing surrounds the opening. The square barrel JN7400 Series configuration is recommended by DuPont for use on Corian doors, tying its application directly to solid-surface doors fabricated from Corian within toilet stalls. Two hinge sets are recommended for up to 50 lb doors, aligning the hinge application with doors in that weight range and helping plan how many hinge sets are used per door. The square RH in-swing and LH out-swing orientation defined in the product name steers this kit toward stalls designed to pull inward on a right-hand swing from the outside view or push outward on a left-hand swing, keeping the hinge use case consistent.

Why Handing And Series Details Support Repeatable Results

The explicit right-hand in-swing and left-hand out-swing labeling, combined with the rule that the hand of the door is determined from the outside of the stall, gives a clear basis for repeating the same hinge orientation across a bank of stalls. When facing the stall from outside, if the door swings into the stall and the hinges are on the right, this description matches the application and keeps hinge choice aligned to the actual swing. Using a surface mount hinge design keeps all hinge bearing action on the face of the door and partition elements, so installers can lay out fastening locations referencing visible edges rather than concealed mortises. The JN7400 Series designation, together with DuPonts recommendation for use on Corian doors, reinforces that repeating this hinge selection across Corian toilet doors maintains consistent hardware behavior and material compatibility.

Common Questions About This Surface Mount Hinge

Select This Hinge Kit For The Right Toilet Door Swing

This surface mount hinge kit from Jacknob Corporation, identified as part number 7413 in the JN7400 Series, is specified as square RH in-swing and LH out-swing, so it matches stalls laid out with that swing orientation. Two hinge sets are recommended for up to 50 lb doors, aligning the choice with common partition door weights. JN7400 Series hinges are recommended by DuPont for use on Corian doors, tying this hinge selection to Corian toilet door installations. For toilet door hardware projects within this profile, this surface mount hinge kit provides a defined combination of series, handing, and weight guidance that supports consistent stall layouts.