Toilet Door Hardware Components Surface Mounted Hinge Kits, Square LH In-Swing / RH Out-Swing

Surface Mount Hinge Kit For Toilet Doors

surface mount hinge kits from Jacknob Corporation provide a square barrel hinge solution for toilet door hardware where an in-swing or out-swing configuration is required, giving stall installers a defined, repeatable way to hang partition doors. The product is identified as Toilet Door Hardware Components Surface Mounted Hinge Kits, Square LH In-Swing / RH Out-Swing, so it targets stalls that need a specific hand and swing pattern for correct door operation. The hand of the door is determined from the outside of the stall, which sets a clear reference point when laying out hardware on site. For example, facing the stall from the outside, if the door swings into the stall and the hinges are on the right, this is a right hand in-swing, helping crews match the correct hinge orientation to the job layout and avoid rework.

Key Hinge Kit Details For Stall Work

• The hinge kits are described as Toilet Door Hardware Components Surface Mounted Hinge Kits, which positions them for toilet partition doors and lets trades match them to stall hardware schedules without guessing about usage or intent.
• The square barrel JN7400 Series are recommended by Du br Pont for use on Corian doors, indicating these hinge sets are suited to Corian door material where that recommendation is followed on projects using those surfacing products.
• Two hinge sets are recommended for up to 50 lb doors, so installers can plan door weight around this guideline when hanging typical partition doors within that range during layout and hardware selection.
• The hand of the door is determined from the outside of the stall, which gives a fixed viewpoint so left-hand in-swing or right-hand out-swing conditions can be identified consistently during field measurement and hinge positioning.
• The product is part of the JN7400 Series, tying this hinge style to a defined series identity that helps replacement work and coordination with specifications that call out that particular Jacknob series.

Surface Mount Hinge Layout And Swing Logic

This SURFACE MOUNT HINGE uses a square barrel design referenced as JN7400 Series, so installers work with a hinge geometry that matches that series profile when aligning doors. The hand rule states that facing the stall from the outside, hinges on the right with the door swinging into the stall indicate a right hand in-swing, which is critical when setting hinge locations so the door clears dividers correctly. The toilet door hardware classification places this hinge squarely in the toilet stall hardware group, keeping its role focused on stall doors instead of more general openings.

How This Hinge Kit Fits Stall Projects

Where These Surface Mount Hinges Are Used

This product is classified under Toilet Door Hardware and Builders Hardware, so it serves in toilet partition door applications where a defined stall hardware set is needed. The description Toilet Door Hardware Components Surface Mounted Hinge Kits, Square LH In-Swing / RH Out-Swing shows it is aimed at stalls with either left-hand in-swing or right-hand out-swing configurations, giving installers a way to match hinge hand to stall layout. The square barrel JN7400 Series identification connects the hinge to a series that Du br Pont recommends for Corian doors, so on projects where Corian doors are specified under that recommendation, these hinges align with that material choice. The manufacturer, Jacknob Corporation, positions the hinge within a known toilet door hardware line, helping commercial installers and maintenance teams source consistent stall hardware across multiple restroom openings.

Why The Verified Details Support Consistent Results

The guideline that two hinge sets are recommended for up to 50 lb doors gives a weight reference when planning hardware for typical stall doors, so door selection and hinge count can align with that recommendation during design and installation. Using the outside-of-stall perspective to determine hand means every crew member can identify left-hand or right-hand in-swing and out-swing the same way, which supports consistent hinge handing across a bank of stalls. The square barrel JN7400 Series style provides a specific hinge form, so replacements specified as JN7400 Series can match existing door hardware where that series was originally installed. The focus on LH In-Swing / RH Out-Swing in the product name ties swing direction directly to the hinge kit identity, reducing guesswork when ordering for new stalls or matching existing stall traffic patterns.

Common Questions About This Surface Mount Hinge

Select This Hinge Kit For Stall Door Layouts

The SURFACE MOUNT HINGE identified as Toilet Door Hardware Components Surface Mounted Hinge Kits, Square LH In-Swing / RH Out-Swing gives stall installers a defined Jacknob JN7400 Series option for toilet partition doors. With the hand determined from the outside of the stall and two hinge sets recommended for up to 50 lb doors, this kit supports consistent handing and weight planning across restroom openings. For projects using Corian doors where Du br Pont recommends the JN7400 Series, this hinge kit aligns the hinge style with that door material choice.