Toilet Door Hardware Kits In-Swing, 1" Door, 1-1/4" Post

Toilet Door Hardware Kit For In-Swing Doors

Toilet door hardware kit from Jacknob Corporation is designed as a complete hardware set for an in-swing toilet partition door with a 1 inch door and 1-1/4 inch post. The kit uses mortise hinges, so the door inserts and hinge brackets work together to position the door securely in the partition system, which supports consistent door alignment in everyday use. The hardware belongs to the toilet door hardware class within builders hardware, so it is built around common toilet partition layouts where an in-swing door is required. The kit is identified by manufacturer part number 11000, giving installers a clear reference when matching hardware to existing layouts or ordering repeat jobs. Sold as each, it suits projects where a defined set of parts is preferred over piecing together individual components.

Key Toilet Door Hardware Details For Pros

• The kit is built for a 1 inch door and 1-1/4 inch post, so the door inserts and strike and keeper are sized to match those partition dimensions, which supports correct fit at the hinge edge and latch side.
• Mortise hinges are used in this kit through the door insert top and door insert bottom parts, so the hinge components sit in machined pockets in the door, helping the door sit flush and operate smoothly in the frame.
• The strike and keeper are specified as in-swing for a 1-1/4 inch post, so the latch side hardware is shaped for a door that swings into the compartment, which supports proper latching when the door is pulled inward.
• The latch slide is described as surface mounted, so it fastens to the door face rather than recessed into the edge, which simplifies layout for installers working on toilet partition doors.
• The kit is branded Jacknob Corporation and classified as toilet door hardware, so all components are coordinated around standard toilet partition door usage, supporting consistent hardware selection across similar jobs.

Installation Details For In-Swing Toilet Doors

This Jacknob toilet door hardware kit with mortise hinges provides both the hinge-side and latch-side components needed for a 1 inch in-swing partition door hung on a 1-1/4 inch post. The door insert top and door insert bottom for a 1 inch door work with the top and bottom hinge brackets to create the mortised hinge points, so the hinge pins engage at consistent heights. The hinge bracket bottom includes a 5/8 inch pintle, while a separate 3/8 inch straight steel knurled hinge pin is specified, allowing the door side and post side to mate reliably. The surface mounted latch slide, strike and keeper marked in-swing, and CAM round hex 3/4 inch medium lift combine into a matched latching set for inward-opening toilet doors.

Using This Jacknob 11000 Kit On Jobs

Where This Toilet Door Hardware Kit Fits

The Jacknob 11000 toilet door hardware kit applies to toilet partition installations that use a 1 inch thick door swinging inward to a 1-1/4 inch post. In these layouts, the top and bottom hinge brackets install on the supporting structure while the matching door inserts for a 1 inch door are mortised into the door edge, so the hinge system supports the door along a defined vertical line. The in-swing strike and keeper for a 1-1/4 inch post match that post dimension, positioning the latch pocket and keeper where the surface mounted latch slide can engage reliably. The coat hook combination bumper mounts on the interior side, providing a place to hang items while also acting as a door stop to help limit direct impact against adjacent surfaces during use.

How The Matched Components Support Repeatable Results

The combination of mortise-style door inserts and dedicated top and bottom hinge brackets in this Jacknob toilet door hardware kit means hinge geometry is predefined, supporting repeatable hinge placement across multiple stalls that use 1 inch in-swing doors. The hinge bracket bottom with 5/8 inch pintle pairs with the 3/8 inch straight steel knurled hinge pin, creating a clear interface between door and post that is designed for smooth pivoting and straightforward assembly in the field. The surface mounted latch slide works together with the in-swing strike and keeper for a 1-1/4 inch post, so latch engagement points are matched to both the door thickness and post size, which helps reduce rework when aligning the latch. The CAM round hex 3/4 inch medium lift forms part of that latching action, contributing to the way the latch operates as the user moves the slide. Across a toilet partition run, this coordination of components supports consistent door action, alignment, and latching behavior from stall to stall.

Common Questions About Jacknob 11000 Toilet Hardware

Select This Kit For Matched In-Swing Door Hardware

The Jacknob toilet door hardware kit with mortise hinges, sized for a 1 inch in-swing door on a 1-1/4 inch post, provides coordinated hinge, latch, and bumper components built for toilet door hardware applications. With the 11000 part number tying together door inserts, hinge brackets with pintle and pin, surface mounted latch slide, in-swing strike and keeper, CAM round hex 3/4 inch medium lift, and coat hook combination bumper, this set offers a unified approach to hanging and latching in-swing partition doors using standardized parts.