Inswing Door Hardware Pack for 7/8" Door x 1-1/4" Post, Chrome Plated

Inswing Door Hardware Pack For Toilet Partitions

Inswing door hardware pack gives you a matched set of Jacknob Corporation parts to mount a toilet partition door that swings in toward the toilet, which keeps the swing clear of the exterior traffic side of the stall. This Jacknob Corporation kit is classified as toilet door hardware, so it is built around typical partition layouts instead of general-purpose door parts, simplifying takeoffs for restroom dividers. The hardware is set up for a 7/8 inch thick partition door and a 1-1/4 inch thick post, matching common pilaster and door combinations so the hinge geometry lines up without reworking components. The chrome plated finish on the zamak option provides a bright, uniform appearance that ties into other chrome partition hardware. A cast stainless steel finish is also available from the same line, so the visual and functional setup can match different restroom design standards while keeping the same basic hinge format. Mortise hinges in this kit provide a clean edge profile on the 7/8 inch door and 1-1/4 inch post, which helps keep the door-to-post relationship consistent once the pockets are prepared.

Key Toilet Door Hardware Details For Pros

• The toilet door hardware kit is designed specifically for inswing partition doors, so the door motion is oriented toward the toilet side and follows typical stall layouts without reconfiguring hinge handing.
• Mortise hinges in the kit are arranged for a 7/8 inch thick door and 1-1/4 inch thick partitions or pilasters, so the cutout work follows known dimensions and keeps the hinge leaves flush to the surfaces.
• The mortise hinge design provides 110 degrees of opening, giving the inswing door enough travel for entry and exit while managing clearance within compact toilet compartment footprints.
• Two hinge versions in the product line cover 7/8 inch thick doors or 1 inch thick doors, letting layouts stay consistent across different partition door thicknesses while holding the same basic geometry.
• Items in this Jacknob toilet door hardware line are also available individually, which allows replacement of specific components later while keeping the same hinge style and appearance.
• The zamak construction with chrome plating option in this kit delivers a chrome finished appearance that coordinates with other chrome-plated toilet door hardware in the same restroom.

Inswing Hinge Setup And Mounting Fit

This toilet door hardware kit with mortise hinges is configured so the 7/8 inch partition door mates to a 1-1/4 inch thick post, giving clear reference points for hinge layout on both the door and pilaster. Mortise hinges are designed to sit within pockets in the door and post, so once the recesses are cut to the hinge template, the leaves sit flush and the door line stays close to the pilaster face. The 110 degree opening range built into the mortise hinge design sets the maximum swing, which helps define the door stop position and keeps movement controlled inside the stall footprint. Because this is a Jacknob Corporation toilet door hardware kit, the hinge style and function match other toilet partition hardware conventions, which supports repeatable results when similar stalls are laid out across a restroom run.

Using Jacknob 17800 In Toilet Partition Runs

Where This Inswing Door Hardware Pack Fits

Jacknob's toilet door hardware kit with mortise hinges is aimed at toilet partition doors that need to swing toward the toilet, so it suits restroom layouts where the door must clear an exterior corridor or shared circulation space. The hardware is specified for a 7/8 inch thick door paired with a 1-1/4 inch thick partition or pilaster, so it fits partition systems built around that door and post combination without resorting to generic hinges. Within the Jacknob hinge range, two versions exist for 7/8 inch and 1 inch thick doors, and this kit is the 7/8 inch option, which helps match hardware to the exact door stock used in a run of stalls. As a toilet door hardware product, it integrates into builders hardware and toilet partition hardware schemes, so stall doors follow a consistent hardware style in commercial restrooms.

Details That Support Consistent Toilet Door Operation

The mortise hinges designed for 1-1/4 inch thick partitions or pilasters set the hinge leaf into the material, which establishes a repeatable reference for hinge placement and helps keep door gaps uniform from stall to stall. The 110 degree opening range of the mortise hinges defines how far the door swings toward the toilet, which helps control door travel in compact compartments and supports predictable clearances at the open position. Because items in this Jacknob toilet door hardware line are sold as complete kits and can also be purchased individually, the same hinge geometry can be maintained when specific components are replaced later, keeping door action consistent over time. The available finishes in zamak with chrome plating and cast stainless steel give two surface options within the same functional design, so hardware across different restrooms can share the same operating characteristics while presenting different surface materials.

Practical Questions About Jacknob 17800 Hardware

Choose This Inswing Set For 7/8 Inch Doors

This toilet door hardware kit from Jacknob Corporation is tailored to a 7/8 inch inswing partition door and a 1-1/4 inch post, so it aligns well with systems using that material combination. The mortise hinges provide 110 degrees of opening for controlled inswing movement, supporting predictable clearances inside each compartment. With options in zamak with chrome plating and cast stainless steel in the same product line, you can match surface material to your restroom standard while keeping the hinge geometry and operation consistent across stalls.