Urethane Foam Bumpers Hex Shaped 3/8" Diameter, 1/8" Thickness, Brown - 5000 Box Qty

Urethane Foam Bumpers For Cabinet Doors And Drawers

Urethane foam bumpers from Atlantic Gasket are hex-shaped soft urethane sponge pads designed for application on cabinet doors and drawers, so they act as discreet stops where the door or drawer meets the frame and help control contact at that point. The bumpers are listed as door and drawer bumpers, which positions them for jobs where you need a consistent soft touch point on woodwork without changing clearances much. Each bumper has a self adhesive back, so it presses directly onto the cabinet surface without separate adhesive steps during installation, saving time on repetitive door and drawer runs. The bumpers are described as soft urethane sponge pads, which helps them conform slightly to the mating surface, giving a cushioned contact that can reduce impact at close. The brown color option helps them blend into many stained or darker cabinet interiors, keeping the hardware presence low while still doing the job.

Key Details That Support Cabinet Bumper Work

• The bumpers are hex-shaped soft urethane sponge pads, which provides multiple flat edges for stable placement on the mounting surface and balanced contact where the door or drawer lands.
• Each bumper uses a self adhesive back, so you can mount it directly to the cabinet or frame without separate glue steps, reducing installation stages on larger projects.
• The bumpers are designed for application on cabinet doors and drawers, giving them a clear role wherever a controlled contact point is needed between moving fronts and fixed frames.
• The bumpers are 3/8 inch wide, so they occupy a small footprint while still presenting a defined contact pad, which helps preserve cabinet reveals and clearances.
• The bumpers are 1/8 inch thick, which keeps the stand-off distance modest and maintains the intended alignment between doors, drawers, and surrounding faces during normal use.
• The product is available in brown, which coordinates well with many wood tones and darker interiors, helping the bumpers visually recede while still providing functional contact points.

Mounting And Fit For Urethane Sponge Bumpers

These urethane sponge door and drawer bumpers use a self adhesive back, so they mount by pressing the pad onto the chosen contact area and relying on that adhesive layer for hold. The 3/8 inch width defines the size of the landing surface, which helps you plan exactly where on the door or drawer corner to place each bumper so it meets the frame at the right point. Their 1/8 inch thickness sets the offset between the moving front and the cabinet, which is important when you are working to keep reveals even from cabinet to cabinet. Because they are designed for application on cabinet doors and drawers, they fit naturally into common face frame or frameless cabinet layouts wherever a small, consistent pad is needed.

Using Atlantic Gasket Bumpers In Everyday Cabinet Work

Where These Urethane Foam Bumpers Are Applied

Atlantic Gasket urethane foam bumpers are identified as door and drawer bumpers, so their primary use is on cabinet doors and drawers wherever those surfaces meet a frame or an interior partition. Being designed for application on cabinet doors and drawers means they can be placed on door corners, drawer fronts, or mating cabinet frames to establish a regular contact point between the moving piece and the fixed structure. The 3/8 inch wide hex-shaped pad gives you enough surface to land squarely on face frames or cabinet sides while still fitting into the narrow margins typical around doors and drawers. Their 1/8 inch thickness defines how far the front stands off the frame at rest, which helps align doors in a run so that each front stops at a consistent plane. The brown color option suits cabinets where darker finishes or stained woods are used, keeping the pad visible enough for placement but subdued once the cabinet is in service.

Details That Support Consistent Cabinet Alignment

The hex-shaped soft urethane sponge construction gives each bumper several flat faces, which helps you orient the pad so that one edge lines cleanly with the door or frame, supporting repeatable placement from opening to opening. Because the bumpers are 3/8 inch wide, you have a defined target area for the door or drawer to contact, which helps reduce variation in where each front rests relative to the cabinet body. The 1/8 inch thickness sets a predictable gap, so when you repeat the same bumper placement across a bank of cabinets, the doors and drawers tend to land in a common plane. The self adhesive back means the thickness of adhesive is already built into the pad, avoiding extra layers that could change stand-off from one location to another. Being designed specifically for cabinet doors and drawers ties these dimensions and materials directly to normal cabinetry layouts, supporting consistent results across kitchens, baths, and other built-ins that use similar construction.

Common Questions About Brown Urethane Door Bumpers

Selecting These Urethane Bumpers For Cabinet Projects

Atlantic Gasket urethane foam bumpers in brown, sized at 3/8 inch wide and 1/8 inch thick, are set up specifically as door and drawer bumpers for cabinet work. Their self adhesive backs support a straightforward mounting process on doors, drawers, or frames, which is useful when repeating the same detail across many openings. The hex-shaped soft urethane sponge construction and cabinet-focused design connect directly to everyday woodworking and cabinetry tasks where a controlled contact point is required. For cabinet projects that call for a compact, predictable stand-off and a brown contact pad, this bumper format fits directly into that role.